![Exceed Designs](/img/default-banner.jpg)
- 28
- 101 897
Exceed Designs
เข้าร่วมเมื่อ 28 เม.ย. 2021
Here at Exceed Designs, we develop designs for EDC related products that will exceed your expectations. Our designs designed, finished and inspected here in Washington State, USA. Our flagship TiRant RAZOR can be found on Amazon. Please follow us on @ExceedDesignsCo on Instagram & Facebook for giveaways and exciting new EDC related products! (Website should be launched soon at ExceedDesigns.com
Store Utility Knife Blades In Your Wallet - Exceed Designs BladeBank™ Utility Knife Blade Holder
The BladeBank™ Is an exciting new 3D printed product that stores and holds 2 razor blades at a time in the form factor of a credit card. It's size is right around 2 thin credit cards combined, so it is not much thicker than the new metal-cards that you see usually!
Get 2 dual-sided laser etched razor blades WITH a BladeBank for only $7.99 for a limited time. - Available on our website here: exceeddesigns.com/product/bladebank-2x-utility-knife-blade-holder-credit-card-format-plastic-3d-printed-usa-made/
Get 2 dual-sided laser etched razor blades WITH a BladeBank for only $7.99 for a limited time. - Available on our website here: exceeddesigns.com/product/bladebank-2x-utility-knife-blade-holder-credit-card-format-plastic-3d-printed-usa-made/
มุมมอง: 578
วีดีโอ
Bi-Directional SPINFINITY Fidget Spinner!
มุมมอง 1.2K4 หลายเดือนก่อน
This should help you understand how to use your new SPINFINITY BOLT fidget spinner. If you want to grab one, were selling them for just $20 on our website with real knife pivot bearings! Buy Now: exceeddesigns.com/shop#spinfinity
TiRant RAZOR V3 - How To Swap Your Razor Blade!
มุมมอง 2K5 หลายเดือนก่อน
Need help figuring out how to open your blade holder to swap your razor blade out? - The TiRant RAZOR V3 has one of the strongest - movement-free blade retainment systems ever designed but it takes a moment to figure out how to remove the blade. Instead of 1 notch blade holding retainment , we include 2! Unlike most other titanium utility knives available on the market, the TiRant RAZOR V3 give...
TiRant RAZOR V3 - How To Fully Disassemble & Reassemble The Best Titanium Utility Knife!
มุมมอง 5K10 หลายเดือนก่อน
TiRant RAZOR V3 - How To Fully Disassemble & Reassemble The Best Titanium Utility Knife!
Is This The Ultimate MAGNETIC Titanium Utility knife?! - The *All-New* MagLock 3.0 TiRant RAZOR-M
มุมมอง 12Kปีที่แล้ว
Is This The Ultimate MAGNETIC Titanium Utility knife?! - The *All-New* MagLock 3.0 TiRant RAZOR-M
EXCEED DESIGNS TiRant RAZOR V3 Is Here - The Ultimate Titanium EDC Utility Knife Is Here w/Jet-Black
มุมมอง 16Kปีที่แล้ว
EXCEED DESIGNS TiRant RAZOR V3 Is Here - The Ultimate Titanium EDC Utility Knife Is Here w/Jet-Black
Exceed Designs TiRant RAZOR V2 Titanium EDC Utility Knife (Unbox, Disassembly & Instructional Video)
มุมมอง 13K2 ปีที่แล้ว
Exceed Designs TiRant RAZOR V2 Titanium EDC Utility Knife (Unbox, Disassembly & Instructional Video)
Exceed Designs TiRant RAZOR-M Micro - The Ultra-Light Minimal Titanium Utility Knife & EDC Pry Bar
มุมมอง 14K3 ปีที่แล้ว
Exceed Designs TiRant RAZOR-M Micro - The Ultra-Light Minimal Titanium Utility Knife & EDC Pry Bar
That's is ingenious, why didn't i think of that?? 👍
Would pair nicely with my TiRant V3, it's a great idea, but I'm a bit concerned about durability. How long has it been "field" tested?
We’ve been testing it in multiple styles of wallets for awhile now, I don’t have precise hours of use, but it does seem to hold up fairly well, considering its price is around $3-5 bucks (excluding blades included). It say it should last up to a year if your wallet isn’t too flexible
Will there be a titanium version, Josh? I think you alluded to it in your email??
Yes, I’m hoping to make it in Ti in the future! I REALLY want to!!
i really want a one! how safe are they to use? as in will it ever poke out of the wallet? and about how much longer for tirant ultra release? i neeeed some leaks or something
It is relatively "safe" but it also can be dangerous if you don't make sure the blades are all the way in. We made it so there is resistance and the blades cannot just "fall out" so that makes it relatively solid. I have not had them come out once and have used it a lot, but if the blades are not fully "seated" in the further-most portion of the holder, they could theoretically come out easier. We put a hidden notch inside the holder to keep the blades from being able to work their way out without pressure in your hand. Always remove the blade by holding front and back and slide out when removing and it should be fine! I don't think there should be much of an issue at all. The ULTRA is coming along nicely, we have almost 14 different blade designs with all kinds of various grinds. We are trying to settle on 5 proprietary separate blade designs at first to ensure we don't go crazy, as well as the Traditinal razor blade holder which will expose 90% of a normal trapezoidal blade. The ULTRA is very exciting and it's all I am thinking about daily right now to get it launched, but there are a few remaining items needed to solve, so we are working on it hard! Thank you, -Josh
When will they be available I take 3 please
I just listed it! Should be on our website now using the ink in the description!
@exceeddesigns I got 3 each thanks
Confirmed order just now
@@mortarish Awesome! We will be shipping this week!
This is great!
Any more info coming on this?? I'm on the verge of a Cascadia V3, but I can really only get one and don't want a nicer razor to release immediately after I get mine!
This product won't replace the V3, this is essentially a larger variant with more capability. It is going to be awesome, but it won't replace the V3. The ULTRA also will be priced higher, so the V3 still is the best value of any model and will remain that way into the future. We do have a ULTRA clip for the V3 that will work with ALL existing V2 / V3 models shipped in the past 4 years!
You can hear the blade getting duller with every "clicky". absolutely hate mine
All of them😅
I lost mine 😭
The flipper is awesome but this is a poor design imo the blade drags across the bottom dulling it out super fast and the magnets deactivate ur credit cards and hotel room cards and the magnets pick up all kinds of metal shavings if u work in construction like I do
Damn, now I want to order gold hardware for my 2 new v3’s!
Really cool design but I just saw someone post on Facebook where you won't warranty his knife he just got because it wasn't deburred properly.Claiming it has a lifetime warranty and not standing behind it is not cool.
Love it so much I got one for me and my mom the only problem was the clip the screw keeps falling off idk where the screw is anymore so I can’t use the clip anymore
I tried to do this with the older model and scratched the heck out of the scales. It is not accessible without heat and I found that out the hard way. I was trying to change to the pry bar attachment and failed.
Wish it had washers instead of barings
I've a stonewashed v2 and a black pvd v3. I need this too.
That's awesome! yeah, the V3 will always have it's place and we are not replacing it with the ULTRA. The ULTRA is just another new larger handled "mega" version of the V3 with some amazing new features!
Not many purchases have been this satisfying.
Question : I noticed on some of the knives demonstrated in the video there is one blade notch showing in open position while other knives that you shown have no notch showing in open position. Which is correct or does it depend on the number of notches on the razor blade itself. My razor knife was delivered with a blade with four notches, while the included replacement blades have only two notches. I also noticed that the various blades that you now sell have only two notches as well.
@@richardsponholz9617 it depends on how many notches are on the blade - there’s a variety of different blades that have 2 or 4 notches, some have 3, it’s dependent on user preference but you’ll always want to have the blade fully seated in the furthest in position to safely operate it
Awesome design great quality nice work Exceed Team
Need to see this!
yes, you do!
I need to be on a list for this! Can't even tell much about it but I want it!
Just a sneak peak, we’ll post more info soon, but it’s really exciting!!
Nice looking unit , would need to see on in the flesh to really form an opinion !
It's coming and I cannot wait to show everyone soon!
Really doesn't show much does it?
Just a sneak peak, we’ll post more info soon, but it’s really exciting!!
can't wait for this! I love the frag grenade scales for the tirant v3, do you think you'll make some in jet black some time?
That’s a good idea! We should!
hey josh, will this new tirant Ultra be available in jet black?
Thank you! 👍🏻
Just order the titanium one can't wait to receive it
Jjst ordered this one in titanium. Was gonna order black but was afraid of the black finsh rubing off
Can you Use any utility blades?
Where can you buy this
Hey Samantha! You can get it on our website: exceeddesigns.com/product/tirant-razor-m-3-0-maglock-utility-knife-stonewashed-6al-4v-titanium/ or on Amazon at: www.amazon.com/Exceed-Designs-Magnetic-Stonewashed-Jet-Black/dp/B0BWDTJCDC/ref=pd_ci_mcx_mh_mcx_views_0?pd_rd_w=bMrAd&content-id=amzn1.sym.8b590b55-908d-4829-9f90-4c8752768e8b%3Aamzn1.symc.40e6a10e-cbc4-4fa5-81e3-4435ff64d03b&pf_rd_p=8b590b55-908d-4829-9f90-4c8752768e8b&pf_rd_r=8A9C63418B0ZVQXQ3090&pd_rd_wg=GTA0b&pd_rd_r=fb238a7d-e712-48cf-80aa-100699f32599&pd_rd_i=B0BWDTJCDC&th=1
I’ve been rocking this magnetic one since I got it. Still on the first blade (about 2 months) it’s still popping zip ties and breaking down boxes. I got the blue anodized one it’s starting to fade but looks good like a very loved pocket knife. Like it so much I ordered a 2nd one today just to have around so I can really beat on my original and not feel bad about it.
I think you should make the magnets captive so even if they break ityll never stop working. Rare earth magnets are so fragile
Can you use ceramic blades in it
Ceramic is not magnetic. U can use ceramic in the v2
Can I still buy this version?
I should call her…
me talking about my hog
You are going to blow up bro! Millionaire in the making! Keep it up! Loving the v3!
Do not change a thing! Perfect as is. V3 rules!
You should offer custom die cut rubber grip stickers like they have for the Glocks…
Noice!
Loving my v3. Just got it 2 weeks ago. Zero issues thus far… Thanks for constantly improving the design! A+
Thanks for providing this video. It was so frustrating trying to get the blades out but watching my coworker do it with ease right in front of me. I was almost discouraged from buying a blade bc I couldn’t do it easily. I was able to do it easier on the V2 so it’s given me confidence with the V3 release update
I just received this knife in the anodized cobalt blue. The shipping took longer than I expected (but this was my bad for not reading the very in your face description due to being very exited to order) but upon receiving I can say this thing is absolutely fantastic. It’s true innovation in a very niche market. I own all the micro utility knives that count. From the O.G. TPT, Best damn EDC TPT slide, GIL-TEK R.U.K., The grail of all micro utility blades and the one to start it all. The Rexford R.U.T. These all ranging from $30 to $200 the R.U.T. Being the most expensive and for good reason it’s a true masterpiece from one of the worlds best custom knife makers. Now as for the mag-lock 3.0 it’s coming in at $95 made in AMERICA Titanium with a pocket clip and one of the most user friendly I’ve come across in this class. While I wish it performed more like the R.U.T. In a few areas like a bit driver, bottle opener, and sharp 90 degree corners that can strike a fire steel. It’s far underpriced for what you’re getting at $95 dollars. I’d be comfortable picking this tool up in the $120 range. It’s 100% U.S.A made by a small company with a truly innovative design that you can’t find from any other company. You’re still getting a pry bar/flat head. Which in all reality will work just fine as a bottle opener. It’ll pop open paint cans and do anything you would ask of a knife. The magnetic locking system for the utility blade is where this tool shines it’s fun, unique and provides a certain fidget factor you have to experience to appreciate. And most importantly it has rock solid lock up no up down or side to side due to the custom rare earth magnet’s. And for anybody that’s gonna ask yes the blade will rub on the housing. This is almost unavoidable in any micro utility knife. With this level of engineering and machine work there will be sacrifices in order for it to function properly. You’ll find this in a $30 Gil-Tek all the way to your $200 R.U.T but it’s a minor inconvenience with a high end utility blade and a honing steel you can get well over 2 months out of a single blade. It’s still a tool and like all tools requires maintenance and a little know how if you want to have that razor sharp blade all the time. All in all I hold this particular micro utility knife in as high regard as a Rexford R.U.T. And that’s saying something while it lacks in a couple areas it shines in so many more. It’s a true 10/10 tool. Just order one.
Thank you for your review - I’ve been using mine ever since it was released - I’ve owned the original without the magnets (which I loved too- gave it to my brother after several years of use and he still enjoys it) I think this utility blade holder is best due to its ergonomics. It’s tiny, it’s sturdy, it’s satisfying fidgety and like you said- the pry edge is a completely functional bottle opener. I’d rate this 10/10 even despite my only con. I ordered the upgraded gold plated magnets. My advice - DONT! - the gold coating didnt last a week (other than the screw holding the pocket clip). Other than that, I have zero regrets and love the design and show off my dumb Lennox gold utility blade every chance I get
Just did the bearings and bushings in mine, works good as new. Thanks.
Sick!
Love the look and design of everything except the blade swap. I'm finding swapping the blade to be quite difficult.
It is super easy. Pay attention to the vid. Sooooooo easy once you understand.
Looks pretty cool ; how much ?
beautiful video production . just a little short 😅
#First 🎉🎉🎉
I just got this. I want you guys to know I'm gonna beat the bag out of this.
Avair or tirant? I know you designed them both but if you had to pick one. Love my tirant v3... How should I clean the holder? Looks a bit dusty under the blade?
Gun cleaning patches work for me.
I like it!