วีดีโอ

Wiha and railer both make 3 inch h3x bits..... on az.... wonderful.... #GetOnGab

You did a great job with that, especially if it's your first build. I love the Gibbz because of non-reciprocating, and I can charge and stay on target. Mag changes, you don't even have to drop the sights. They are so smooth it was designed by two x NASA guys. Being an AK guy, Gibbz also makes an upper for the palmetto state armory ks-47 so you can switch uppers to a right side charging. It's an uncommon AK build and uses AK mags, which is my absolute favorite build.

I love those uppers they are the best. Just make sure you always have an extra cam pin. It's proprietary, as im sure you know. It's the smoothest upper on the market. Xproducts used to make a side charger, and it was the best, but it got sued out of existence. So, the xproducts are still around the upper, and it is not. You only have to cut one tab, then take a file and fit the guard tab to the upper.

LTT gunsmithing is sub par. I ordered a p30L directly from them with the GG SRT and RMR optic mount and I’ve had issues with the trigger sticking upon reset where it wouldn’t go all the way forward to having their modified extended roll pin that interfaces with the optic mount coming loose cause they installed a pin that was too thin in diameter than the hole

I think japanese training rifles had different extractor and didn't have locking lugs on the bolt head

Good information! Thank you.

Depends on your 45 canted setup and actual dot itself...if you run a setup thats a little furter out to the side or more higher and almost obstructed by tirrets or further forward or back it all has a different posture to use...my 45 degree setup is w a vortex defender and it sits perfect height i can like barely lean the rifle and i start having usable dot...less movemt thn a chin weld w a 12oclock

Glad to see HK back! Looking good with your ambi bolt release, extended castle nut, ral adaptive battle grip, buffer tube, ejection cover, and charging handle. 45 degree safety, too? Nice! We’re getting a video on your upgrades, right? 😉

Found my way here via the link you dropped in the offset/piggyback video. I am a Rx glass wearer as well, I'll have to check these out. Thanks!

Nice looking rig you've got there and another excellent video. For my neck length the offset works best for me as well as the fact that I manage to keep the same cheek-weld when rolling the rifle back to the primary optic (I may just be weird that way lol) but your explanation covers both the pros and cons of each set-up and will probably help quite a few undecided shooters. I'm about to send out my MR762A1 for some refinishing work as well. Are you pleased with the service and quality of work on you rifle? Would you recommend them and also, what was the turn-around time? Regards

now all you need is a bipod and voila a very sexy DMR

Are those glasses prescription? If so how are they and how do they feel with comtacs on?

I personally like piggyback dots on top mainly because I run night vision and when I see night vision the higher the better when it comes to passive aiming. Now even without night vision I enjoy a more heads up style when shooting. Instead of trying to turtle neck into the stock.

Do you run it with a suppressor? I also bought his rifle and Iam thinking about running it with a flow through suppressor.

AWESOME VIDEO THANK YOU!

Thumbs up!

I was researching this very topic a few days ago.

Good stuff as always!

I appreciate the shared info. Straight forward explanation of your experience.

Is that a march shorty?

What weapon sights are you running?

I’ve finally decided to stick to just one platform 😱. Done switching from gun to gun never really mastering just one. I chose my P30 because it fits my hand like a glove, I can use it for EDC, HD, range, etc. and I just spent money with Gray Guns upgrading the trigger.

USE BOILING WATER FOR ABOUT 1 HOUR TO REMOVE THE MUZZLE DEVICE. I USED THAT METHOD PLUS A PRY BAR AND GOT MY MR762 MUZZLE DEVICE OFF.

AMAZING

GREAT VIDEO AND GREAT RIFLE

Maybe I missed it in the video but did you say what flash hider you're using? Is it the standard flash hider or the recessed one? I understand the adapter was the recessed version.

what in the Saudi oil money is this

By chance, did you ever consider the LMT MWS platform? You get the choice of DI or Piston, barrel length, barrel lining, chrome or stainless, and a bit cheaper than the HK. Not sure of the weight off the top of my head. Plus, LMT is known to make reliable and battle ready firearms.

I have a buddy who's considering getting the SAR because it's the closest thing State-side to the Singapore SAR 21 that he served with back in Singapore.

With the Polymer feed lips on AKs, do you have any videos elaborating on the issue? I have some Polish mags that are all Polymer and they hold up pretty well. How many rounds does it take before the polymer mags start to break compared to steel reinforced lips? I guess I just don't shoot enough to see major differences. Where I do see wear on the Polish mags is on the locking lug, since that is plastic too, but I haven't yet had a feed lip failure.

Waiting for mine to get out of jail. I haven’t had a chance to use it but I’m glad I bought it. It’s hard to find anything negative on any of the CAT cans… besides people complaining about their old warranty policy.

You're right about it getting hot faster.

the audio quality is kinda bad so i'm not sure there's much use here for all that hard work testing the distances and stuff

Man those uneven rivets would drive me crazy. So many people talk shit about it, but I do enjoy my Hellpup and n one has seemed to have issues with those, just the sporter rifles. I suspect the issue isn't the casting in that case and more so the US side screwing up with all the 922r bs.

Not sure if this is by design or just "we don't care because we are russian - fuck you" .. but the IR signature of the Gorka as you say is pretty bad when it comes to the reinforcement parts which are polyester afaik. Having used my PVS14 out during spring/summer one realizes that chlorofyll causes all green leaves reflecting quite a lot aswell. Same goes with snow i guess, having a very reflective polyester overwhite snowblouse is awesome and having something as non-reflective as my UF-Pro or Crye pants is a dead giveaway... One trick i have heard about is to rub dirt on those parts so as to "naturalize" them.... Cheers and thanks for good content,

Got mine in a couple weeks ago. I am very impressed at the performance. Tone is fantastic, rivals a Nomad 30. Like yours, the weight of mine was not as stated. 15.3 oz. Had to put a keymo adapter on it as my p/w already had a keymo flash hider so now its 19.6 oz. Still fantastic. Compared to a sandman s and a sierra 5, the back pressure was reduced by a lot. I don't feel anything coming back to my eyes or face. I am very happy with this. Can't recommend enough to others.

Question, what's the name of the lower handguard you're using? Doesn't look like the TDI variant. Is it a real AK100 series?

Great review. I just picked up my CAT WB 718 the other day too. Funny enough, I was debating between the plan b and the dual lok as well, and I chose to go with the dual lok, and it is great too. The dual lok is definitely rock solid, and it only adds 1 oz in weight over the plan- B low-pro adapter from Wolfpack, but it does add an extra inch in OAL as you know.

i got the cat ODB and i love it, i also got the PTR VENT 3 and it soulds great but like you mentioned. titanium

Will never support CAT no matter how appealing there product may show A company whose name is Specterscat. Really is Specter Scat because scat equals shit Their website looks like a 14 year old on acid made it. Its horribly designed and so cringe The whole Mr. Gingers box of toys. So is it Specters Cat, or Mr. Ginger. Then the stupid names they give their products. White bread, Dirty Dave, Old Dirty Bastard. Not appealing at all Their warranty sucks dick. Lets also not forget that their hub compatible can will not be warrantied if you are using someone elses muzzle device. So why the hell did they make a hub compatible can. They charge you 20% while the rest of the industry does unconditional lifetime warranty (I understand it may be impossible to repair 3D printed cans but still. Not appealing) We have no name or face for the company. They don’t own their own FFL, CGS holds it and CGS is already known for bad communication and warranty. From readings online Cat is the same if not worse Their stupid cringe AI videos with the name MEOW I have never wanted to see a 2A company fail more than CAT. Stay in R&D and get out of marketing. If not then you need a full overhaul of the company

Good review. Where did you find the HK AR mags?

It's a small thing, but I really appreciate that you just review things the way you do and aren't another one of the "I bought this suppressed SBR because I want to survive my work commute in case the North Koreans invade or the power grid suddenly goes out and I have to fight my way home."-kind of shit. You're also just pleasant to listen to.

*cries in ban state*

Feld, thanks for your review. Your experiences mirror mine since I got my WB 718 paired with an 11.5" upper. It's amazing how advanced the Surge Bypass technology is and how little gas you get back to the face while also getting RC2-like sound performance. One thing I did to my can was cerakote it because the raw inconel was getting marked up easily. The media blasting process smoothens out the texture and at the end of it you can see little 3D printing artifacts which is neat.

You're 762 gun is sexy as hell

My particular rifles do not shoot good groups with Golden Tiger. In fact they were the largest groups of the 5 brands I tried. I will say the groups were better than your first go round.

Do not loctite the new Aimpoints. They have helicoils, which can be damaged by threadlocker.

The reinforcement plate issue is the same reason I had to take the Tango Down grip off my KR-9. Super uncomfortable having your hand jammed into the edge of the hinge.

I’m at just a little over 700rds on my Psa ak102 that being said the last 200rds for sure were suppressed and no problems yet. I have used 55gr Winchester white box and Winchester 62gr

TTU m2 works for me