วีดีโอ

"Hit the button" ??? What FN button?

Does anybody have a menu option with something called "the bottom option"????

What printer

My hero

What's the last option z offset

Yep this is the best way - I tried splicing - I tried soldering iron , lighters , shrink tube method and nothing worked - what a waste of time printing splicing jigs .

What are you even talking about? 🤦‍♂️

the model you've shown with layers not properly merged is an indication you print on too low temperatures. 205 is not enough for PLA.

"You hit the button" Really? What button? what is the button going to say, you do realize we can't see what you highlighting on the screen right? Are you pausing? Are you stopping? What are you doing? 👎

I have a CR-10 and need help doing this

What option were you hitting? On a Sunlu here, but the bottom option on my "tune" menu is Z-offset. What are you hitting?

Bro this is pretty useful because I got a 3d printer for Christmas and I did not know so when I was doing my first print I wanted to change the filement mid way so then I tried did not work did not know how to take it off the filement so I cut it off so the. That finsh and when I was trying to put the different filement and it did not come out did not work and this u stop the print too it off then try doing a new print with that filement and then it did not work me and my dad are trying to fix it and it did s not working and my dad said the next day I am going to help her m and my grandpa with chairs and then i am going to be able to mess with fix and have fun with my 3d printer but the. That same night he got hung over so then we could not go to the house and I fell asleep for the entire day and the next day I am going to Mexico and I can't bring it so I only have played with it ounce so then I have to wait a few days till I go back home so then I can play mess with it and fix it all I want t and do all of that even in the night if I wanted to so yeah this video was pretty useful so then I am able to switch out my filement a bit better and I am still watching videos on how to swap filement a and how to unclog a 3d printer and a bunch of other videos on what I think my issue is on my 3d printer:)

What was the bottom option? You never said

Nice video! short, sweet, to the point!

whathappens if the filmet runs out

1:00 You didn't say how the option is called...

hello, i was looking into printing one of your 105mm shells with the mgs stryker shell fuze, but it seems the link to it is dead, may i ask if there is any other way of getting it?

i cannot hear you.. turn up the sound.

Will this damage your printer

"scroll to the bottom option"? You couldnt tell us what you clicked exactly? as you say, each ender is slightly different.

Thanks guy

“You scroll all the way down.” To what?? “You hit the button” What button?? “All printers should have this option” What option?!

Possibly consider swapping hands so that the iron doesn't burn the new connector.

3:30 "He's gonna forget the heat shrink." Yup. Forgot the heat shrink.

Click on the main button, scroll down 2 spot and click yes, then hit the red powwow button, turn the ignition & start the engine. Now your space ship is done and you no longer need to refill the filament.

glad to see im not the only one with the compression fitting problem. Wish they would make the holes bigger and tapered.

Sorry for being critical, but you said “select bottom option” without saying what that option was. Not all printers have the same options or option order. Also, nothing about hotend temperature? In a real run-out situation, it would have cooled and not pull filament through, and if you reheat too hot it will cause a jam and ruin your print. Advice… address more scenarios that people go through, as they’re likely watching this while experiencing them.

The last option is baby step z not an option that’s going to push the filament out for me

What bottom option???

If I didn't watch this I wouldn't have known I put the magnetic sheet on wrong. I heat the bed to 60, removed it and put it on right. I thought it wasn't sticking right. Lol.

how often do you find yourself needing to replace the nozzles?

Thanks Maker Steve, this video helped me fix why my prints were suddenly really fragile and cracking at the walls when squeezed!

I've known people that just feed a new spool as the old one runs out.

Thanks, saved my ass even though settings were different.

At any point later may I reuse my Presto® food dehydrator to dry foods afterwards?!?!

no option on voxelab aquila

I wouldn't use them at all. Just get longer wires and connect directly with properly terminated ends. What's the point of them anyway other than quick assembly out of box? Once set up, much safer to just eliminate the connector all together.

Won't heat eventually kill any magnetism on the pad

What are your thoughts on the Escher3d calculator?

Would a direct drive mod prevent this issue? I'm considering investing what with all the issues from retraction errors, the awkward feed angle and such. It seems like a direct drive on the gantry would prevent some wear and tear.

Try leaving the PTFE connect out 2 turns, push the tubing in and then tighten the connector the last 2 turns. This helped me.

i dont have change filament option in ender 3 pro so i burned filaments and connected each other correctly after that i cut extra parts around filaments. its working good now.

Why has my ender three not got that option in the tune msection? I cant find it anywhere

Hit the button, go down to the bottom option. U R A TOOL

Im having issue on filament change after the filament sensor detects run out. my having layer gap/shift at least a layer.

Does the Pause function in Octoprint work just as well?

My Ender 3 Pro must have different firmware. I just did my first mid print filament change and when I selected 'Change Filament' in the 'Tune' menu, the printer did not finish the current layer but instantly went to XY home and retracted the filament. After doing the process, I see I need to devise and implement a mechanical Z lock so it will be impossible to move the Z axis during filament changes.

Maker Steve, please revisit this video and add subtitles to everything that can be identified. Specifically, all menu items you are navigating and what you are looking at. I really need that information as a beginner looking to solve a problem: running out of filament mid-print and though I paused it, the job cancelled out. I changed filament (from sample spool) to new, found option Continue; option to recover at break. But the print head went to the top, is just moving back and forth and no filament is coming out (It did not come out at loading when I pressed, 3x). I know, I should have stopped there... I was really hoping your vid had the answer for me...almost! (Lotmaxx SC-10)

Help a noob out. When I change the filament just like you did, the layer won't stick. What am I doing wrong?

Speak faster! I’m running out of time!