วีดีโอ

Excellent video. Great detail.

Were you able to sell them for the price you mentioned towards the end of your video, and if so, how long did it take for the first sale? Great work, by the way, I enjoyed your video.

Thank you for the information on how to do this, I will be able to make a great one for my 12" miter saw as well. this will help me with the issue i am having on my miter saw.

Great work & project but what do you do when you need to make miters? Good bye zero clearance!

Great video! Your explanation and process were clear & concise, and made this a very doable little project with simple tools. Also, now I know what I'm doing Saturday morning 😂

Hey Rick, with that Airborne shirt on I am going out on a limb and assume you were in the Military. Thank you for your service to our Country. I appreciate what little freedom we have left because of people like you.

Two big mistakes. Net is lower for pickleball, you should not use tennis net. Second, color is wrong. Yellow is too bright, it will distract both tennis players and you if you play with yellow balls. It is recommended to use the color from the same family as the tennis court (light or dark blue in this case). Otherwise, good job.

Good job and design thx for sharing enjoyed it Keep building

Hi. Does anyone know if you can unlock and/or change code remotely while not being home? Or is it something where you have to be near it with WiFi or Bluetooth

What did you use to put the number on the glass and get the glass black

I had the same idea! Just a small problem. I don't have a workshop 😅 Great video though!

Great video. Could this heat gun be used to disconnect car exhaust pipes , when one pipe is slid in another.

Great job

Brilliant that's a brilliant idea jig is so simple thanks. I never would have thought of it many thanks

Can you purchase the plunge kit separately

Good job and project thx for sharing looks great enjoyed it Keep building God Bless

Good job and project it turned out really well thx for sharing God Bless

Can the lock be attached to an app?

Really nice work!

All tuned up. Got new tires, Timberwolf blade, new bearings and air hose. Back together and running ok. Seems a bit noisier than before but I went from 1/4” to 1/2” blade. Thanks for your help. Seriously. Paul

Great video!

Beautiful mitre station, great shop and organization! I’m obsessed with these specific builds because it’s so relevant to me needing to get control of my garage lol. Right now it looks like a hoarders paradise of tools and I hate how unorganized and stressful it is searching for the right tool or part/bit. I’m surprised more don’t do floor to ceiling tall cabinets with vertical storage. If you decide to go that route pls film it lol

Great simple build, this workstation is coming together nicely!

Got everything back together. Now all I need to do is center and tension my blade. Thanks. Paul

BTW, my 2005 PWBS 14 doesn’t have knobs on the bottom to remove the table.

Ok. I had the wrong hole for the thrust bearing. But once assembled, the blade is touching the right bearing and the thrust bearing is pushing into the blade. The assembly seems to be as far back as it can be. I just changed tires and blade and am having trouble getting the blade in the tire center. What a mess. Paul

You never say which way the central shaft is inserted. It has a lip in it. Is the lip on the inside or outside? I removed all my bearings but the rear thrust bearing hole doesn’t line up with the mounting hole. I checked the original and it has the same problem. What’s the trick? Thanks, Paul

Nice video, and good recycling...but not a reel, it's a hose hangout.

I believe you said a couple of times that one revolution of the adjustment ring is equal to 1/64" of depth adjustment. As you rotated it, it looked like it moved WAY more than a 64th. I looked up the manual for this and one complete revolution actually equals a half inch of depth. The 64th you are refering to is what each mark on the adjustable scale equals.

You really cover everything and I appreciate it. I’ve followed you on Instagram. But I don’t have the confidence to dissemble everything like you did. My saw has no knobs to remove the table too. Maybe it’s an older model. But I’d like to clean everything and remove whatever rust and dirt I see.

Ok. I think I got it. My wife must have slipped me some goofballs this morning in breakfast. I notice that Amazon sells both upper and lower bearing housings as well as the bearings themselves. My bandsaw has been in storage for over 15 years. Do you think I should just replace the whole units rather than just the bearings? Paul

Ok. I think I got it. My wife must have slipped me some goofballs this morning in breakfast. I notice that Amazon sells both upper and lower bearing housings as well as the bearings themselves. My bandsaw has been in storage for over 15 years. Do you think I should just replace the whole units rather than just the bearings? Paul

Hi. This is a very good video. Thanks. I have one of these PWBS 14 that I bought in 2005. I recently removed the upper and lower wheels to replace the two tires. The upper wheel was difficult to remove and I heard a “clunk” or two coming from behind. Now I have both wheels with new tires on and I’m trying to put in my new blade. But somehow the tension lever got turned around and the knob at the top doesn’t move the upper wheel. I’m at a loss on what to do. Any ideas? Thanks, Paul

Great job

I have somw if these doors but there are no screw holes to attach the door to the bank. I might have missed this in your vidoe but how did you attach it? I saw you screw it in but did you just drill holes?

Hello. Thanks for the info and videos. Just curious why did you have the ridge vent put in? I seen only one other person do that. They did it for condensation. If that is why you did does it work?

Did you use 2x4s all the way around the window on the inside? I saw the bottom and top. Need to install 6 in my building your video is VERY helpful! Thank you.

I see how the lock works but how do you actually open and close the door since there’s no handle?

Hey, do you have neighbors? I'm curious how much that foam insulation helps cut down the noise from using a grinder, table saw, jointer, sanders, etc. The last thing I want to do is tick off the neighborhood with metal siding screaming like a banshee at 10pm.

Very nice video. Where did you find the brass piece for the coin slot? Also the decal for the P.O. Box number.

New subscriber , nice work , I don’t have a router table to make that cut , What can I do to make this cut pop ?

Very nice, Well done.

What is the distance between your trusses? How much of a difference did this make towards keeping your Temps down?

Nice video, I plan on doing the same to my 24 X 20 X 12 building in north Florida. I learned a lot Thanks for taking the time to do it

Hi Rick, great video and an awesome project! Did you know….. ( i was surprised to see the Levi’s shirt and then an NRA shirt. You’re clearly a hunter just know Levi’s is a publicly held company mostly owned by heirs, that are very Anti 2A and spend wildly on any anti gun cause and candidates, and get none of my dollars.

How many fingerprint can you put

They are awesome, thanks for showing us this!

Tha preces 😁

Great job. Thanks for the tips.

Good review but can you tell me what the distance is between the center of the ball to the center of each hole that is on the receiver end.