วีดีโอ

Looks super nice! Well done brother

Just got this for free. Home Depot is selling 2 batteries for 299.00 and you get the light for free.

I think if you just cut the inside lip on the mud flap you could retain it...

Love your honesty!!! The video was super helpful to this novice chainsaw user. Thank you!!!

Oh gosh! Thank you!

I do not believe this! Try doing some aggresive 4 wheeling!

You can save time and money by just replacing the a/c compressor clutch.

Was the auto bleed with the scan tool enough or did you do more to obtain a firm pedal? Thanks😅

I put the rim on the balancer first to find the heaviest point then put the yellow dot there. It hardly ever corresponds with the valve stem. I have even found the dot machine off by 25degrees on all four same set but usually dots are close to where they should be. I match balance my own cars. Corghi 5000 touchless machine best purchase ever. You did well with that mayflower tho.

What part of the country do you live in? I understand the air lift suspension you seem to be happy about isn’t so good in colder climates such as ND.

I cross threaded mine too, 😂

I'm having the opposite problem. Will start the truck but won't lock or unlock it. I have to take out the actual key to open it.

Just got mine. This Tool has already earned it's Respect in my tool collection.

Hey man.I am doing same thing with my 2013 4runner trail.My question is what did you do with fender flare that extends on to old bumper and it is not painted it just black

thank you!!!!!!

😂 that’s commitment!

I did a low profile all day today as practice and I think using lube would’ve helped 😅. I did it a few times without terrible ripping it, but I definitely teared that thing apart after 30 or so dismounts

I don't have a probe can you tell me an easier way,? Like turn the AC on and see if the wheel intermittently turns in and off?

Its not the same as my ram 😢

Great video, only question I have is will I need an alignment after this?

Good job very understandable

You was late to work. Great video

Super helpful video-made replacing my chain a breeze. Thank you!

The bigger tires make the truck look much better.

Thank you. At age 72, I am learning something new.

How badly does it scuff or mess up the rim? I have had it with tire shops messing up my wheels, thinking of doing it myself..

If you're alone in the woods watching this video right now put the chainsaw down

Hey man, I followed this process on my 06 B9 Tribeca to eliminate play that my inspector found by pulling on the 12 o'clock and 6 o'clock points while in the air. He said it "might" be the wheel bearing so I followed this procedure which was almost identical. Glad I learned how to change the wheel bearing here but when I was done I realized I missed the mark and it was another issue. Any idea what this can be? th-cam.com/video/7n3gbE-RaNg/w-d-xo.htmlfeature=shared

Had the OEM actuator fail. Replaced with Chinese Knock Off (CKO) from Amazon. It lasted about 6 months. Will not latch. Switch making noise down at actuator, but moving nothing. Ordered a Toyota OEM actuator.

What’s the pull string for?

My 2010 tailgate only unlocks/widow rolls down only with the engine turned on. I’m going to replace the latch anyways but suspect the problem might be an annoying wiring issue.

Do you have a heated seat install video?

We did something similar to our FJ on 49’s, but ours is a straight up rock crawler, still street legal though

Damn I was hoping this was my problem 😞

Thank you for the Video. Its helped me out alot. Thanks

Humble guy , very easy to understand ✌ 👏

Best review by far. a proper demonstration of actual performance

Your video was perfect. The process and everything involved was the same as my 2006 B9 Tribeca except torque spec was 177 ft. lbs back then and the small dust shield that goes in the axle didn't appear to be a thing back then. Brake shield existed but mine was rusted out so it went in the trash. Besides I live off of a dirt road. Thank you!

I guarantee you'll have rubbing while moving over bumps... had the same issue with my Xterra Pro-4x. 2" lift will easily take care of it. Plus, it'll give you the much needed entry that is desperately needed.

Any recommended test/repair procedure for the push button start/rotary dial trans shifter for a no crank/ddial won't move out of Park?? 2014 Ram Laramie 5.7.Thanks

It is silly for Subaru to have designed a tank that is not a whole number of quart in capacity. 0.1 qt is less than 1/2 cup in volume.

This tire machine is good but it will not work on wide wheels or tires you will struggle or better yet tear the side wall of the tire where he mentioned and pointed out where the arm locks so it doesn’t swing out that bracket gets in the way of mounting and dismounting the tire don’t want to believe go ahead and buy it then put it to the test and you will see for you’re self

Do you have the video changing the compressor?

My brother wants to lift his 1500. Do you get any coil bucket contact with this kit?

Just ordered the Milwaukee M18 brushcutter, hopefully it will have the power in need! I currently use the Husqvarna 535LK, which has plenty of power, but not particularly comfortable to use.

Anybody know what happened to the lx470? No recent updates for years. Just disappeared.

Nicely done. Michigan ❤

Hey man are the pump interchangeable they don’t need any reprogramming done???

hello, sir, we have an amazing product(carplay android box) that I think would be a perfect fit for a car. Would you be open to the idea of creating a video showcasing our product?

I need to replace the front pads on my 2017 RAM 1500 and was quoted $280 in labor, which I found too high. So, I've decided to do the job myself and your video was VERY helpful!