วีดีโอ

That chin slider is really a downside

I think it's perfect as an upgrade cable for the ie200, or what do you say?

i have the non-pro version. i did not have issues with charging. i like the physical buttons (everyone else uses these stupid capacitive buttons that work terribly with the input delay) and the charging case (the lid makes an incredibly satisfying sound when you close and the light is diffused properly over a large surface area). worst part is the microphone - its completely unacceptable, whoever i was talking to could not understand anything i was saying. i wish the case was slimmer, it fits in my jean pockets but i would not carry them around at all times like my wired earbuds.

why is every headphone cable designer so hellbent on placing the play/pause button between the volume buttons? they should be separate, especially when you can just reach down to your phone and have access to the volume rocker that you don't have to feel around for

Does the button mute discord?

Очень нравиться кабель! Сам пользуюсь таким

Классный кабель

I gonna buy my first IEM . But which one I should choose with this cable ? Truthear Hexa or Simgot EA500LM for daily gaming and music . And any suggestion IEM ?

I got the grand pa of these kinds of products. Fiio UTWS1 and UTWS3. UTWS3 has the same type of charging case and share the same charging problems. UTWS1 has micro USB socket on each hook. After few years of using, Although the UTWS3 has better sound quality. But the charging process almost drive me crazy. I prefer the simplicity of plug and charge on UTWS1. Especially after putting magnetic micro usb head to the socket. I get a magnet charging system that never fail. The charging case of these Bluetooth dongle are badly designed and will be better to not have them at the first place.

Does it work with the 7hz timeless 2 without any issues?

Interesting keyboard, did u do revive of it?

How do you use the button? mine doesnt seem to do anything but it may just not work which isnt the end of the world just slightly annoying

Will it work with kfine kleen

Been looking for iem cable mic tests. This channel is a godsend.

Is it better than the original CHU II cable? Because my original cable broked and i don't wanna buy anothe IEM.

Is it gonna fit my moondrop lan

How does the Zombur cable compare to the original cable the truthear gate came with? I got the gate primarily for the cable that everyone was raving ab it coming with and some people even saying they buy the iem on repeat just for the cable alone. While I do like the cable, for it's simplicity and the 2 pin connectors shape, i don't think it's worth dropping $17-20 every time for. The Zombur can be had for $10 as you show, so if it is roughly the same quality as the gates stock cable i will pull the trigger on grabbing it.

why the red side of the wire output the left side sound and the black one output the right side sound. I thought the red one usually output the right side

fit good with ew200?

Do these fit the hype 4?

I *_love_* this cable. People keep saying cable effect is placebo; no, it's not. This come from someone who have sensitive ear so much, even living my daily life sometimes causes fatigue to my eardrums. This cable is always my first choice whenever I need more clarity/detail retrieval without spending too much budget on it. Yes, the stiffness is utter sh¡t 😂 but I'm the type that don't give a sh¡t about look/design as long as I can improve my listening experience.

do you have a favorite that is a standard two pin, 8 core without mic and has very little memory?

Is the Recessed 2 pin/qdc type of this cable compatible with tangzu wan'er?

Is that copper wire? Or silver plated? I need a pure copper cable with mic for my EA500LM

Would AZ20 be better in terms of reliability?

I bought a pair of these for my KZ PR2 & KZ ZS12 Pro X. Let me just say they made a LOT of difference. Bass is much tighter. For those that say cable's don't effect sound..I think you're wrong people. PS Chin sliders are for wimpy boys. There are clear marks on the bodies of both connectors to designate what goes where....IE "L" & "R"

Do the led lights flash ir shine when they are in use?

i like your videos ❤

Dose it work on jd1

Can you try next tripowin moonshadow please. Thanks for everything

Just the channel I need it

Have you seen CVJ Vibra? Material and earhook looks unique, not sure if it's rubber like or plastic from the photos, hopefully you'll review them 🙏

Nice review. Thanks.

They unravel. AVOID!

Few Tips And Tricks I Use For My Delicate Radio Wireing. When You Make Your Own Cables, Make SUre You Twist Them All Allong The Wire, It Will Make Sure That The Frequency In Them Two Wires Are The Same Bbettter And It Will Isolate It From Other Unwanted Noises From Electric Cables And Other Wires Around These Wires. Use Ferrite Toroids On The Wires If You DOnt have Them Already, They Will reduce The Interference Better If Without Them, I Have Logitech Z960, Each Of The Speaker Wire Have A Toroid That I Took From An Old Computer Board, Unwind The Cupper WInding And Used On My Speaker Wires, Use The Toroids As Close To Speaker As You Can And Now You Have Low Noise Intefrierance Wires On Your Audio Setup, If It Goes To Sdrs's And Such Delicate Devices, Its Another World On How To Get Rid Of The Noise. My own Microphone, I Bought From Ebay For 50 Euros As A Kit, But I Gut Out The Pcb And Repopulated The Pcb With Much Better Parts, Some Of The Parts Where Older Then Me Times 2 , Soviet Union Preamps ANd Other Parts That Work Better Then The New Ones, The Mic Sounds The Same As 3000 Dolar Mic. If You Want For Me To Do Your Mic Like That, I Can, We Can Figure It Out Because I Have Surplus From Soviet Union Devices, I Have The Parts And Tools To Upgrade Your Cheap 50 Dolar Mic To 3000 Dolar Mic. Just Hit me Up On My Discord And Il Hook You Up :) .....

This one fits to the orchestra?

What is the best budget iem cable mic??

I was looking at the cable on Amazon and was blown away when I found such a detailed review about it. Good on you mate, awesome work.

I have two az09. both had the right earhook stop working. Leds works bot no sound. not even signal sounds. I'm trying to find a disassembly video of it

Do these have the Chinese lady voice over while connecting?

Hey what about tripowin jelly please do a review about it

Thank you for your take on about cable on the beginning of this video, I strongly agree with you. That being said, I'm currently on the lookout for a IEM cable with memory wire, because way back when I used to have a (cheap) custom made cable with memory wire and, although it was thin and flimsy, it was also the most comfortable cable that I've ever owned up to this point. Sadly now the cable has been long dead and I can't get a replacement because the store that I purchased it from is no longer in business. I really wish cable with memory wire is more popular on the market. I'm subscribing to you in the hope that you find one with a more reasonable price tag. Please do share with us know if you do. Kudos, nice review, and keep up the good work. 👍

Could you recommend a good 2pin cable with boom mic for the Truthear Zero Blue and/or 7Hz Salnotes Zero. I ve been using a TRN Redchain plus gramr, which fits like a glove on a pair of KZ ZS10 PRO X but is very short for the rest.

3:50 mic

These are same cables that come with aria 2 but with a mic. I am lookimg for a cable with mic for aria 2. Are there any better options than these?

Lot's of compromise to deal with just buy a TWS it will lasts around 2 - 3 yrs then just buy the next gen TWS that will fancy your taste

do you have any recommendations for an 8-core that performs similar to this or the zonie for around 20ish or less usd🥲? basically soft and no microphonics. 16 is just a bit too much for my use case 😢

2:20 mic test/ sample

best iem cable under 10 dollars

สายอัพเกรดนี้ใช้กับ ios ดีไหมครับ ตัวหูฟังเป็นZero red