Taylor Haug
Taylor Haug
  • 91
  • 548 324

วีดีโอ

DISASSEMBLING THE NEW TIBURON | TIBURON BUILD PART #19DISASSEMBLING THE NEW TIBURON | TIBURON BUILD PART #19
DISASSEMBLING THE NEW TIBURON | TIBURON BUILD PART #19
มุมมอง 3229 วันที่ผ่านมา
Here I disassemble the other Tiburon I bought. I take off all the parts I am keeping. I was very disappointed with how everything was assembled. When I install on my car, I will be sure to use the proper matching hardware and make sure it is safe. No hack jobs here! :) If anyone is interested in buying this car, please let me know! The other Tiburon: - 2006 Hyundai Tiburon GT - 6 speed manual -...
AIR INTAKE UPDATES | TIBURON BUILD PART #18AIR INTAKE UPDATES | TIBURON BUILD PART #18
AIR INTAKE UPDATES | TIBURON BUILD PART #18
มุมมอง 27024 วันที่ผ่านมา
This video is to address the concerns about the new air intake I installed. These are precautions I am taking to make sure my engine does not hyrdrlock! I also want to mention that I had to make minor adjustment to the rest of the intake because it was getting pretty beat up by the car. The opening I cut for the air intake to get through was rubbing on the intake, which would eventually lead to...
I BOUGHT ANOTHER TIBURON?! | TIBURON BUILD PART #17 |I BOUGHT ANOTHER TIBURON?! | TIBURON BUILD PART #17 |
I BOUGHT ANOTHER TIBURON?! | TIBURON BUILD PART #17 |
มุมมอง 1Kหลายเดือนก่อน
Well guys we're back with another video, and another Tiburon too! The plans are still to build my car. However, we purchased another Tib for the parts it has. We will be taking the widebody kit, headlights, tailights, etc. and using them for my build. Then I will be selling the other car! I also talk quite a bit in this video, so I apologize in advace. If anyone is interested in buying this car...
HOW TO CHANGE THE OIL ON A KAWASAKI ZX6R | 2007 & 2008 KAWASAKI ZX6RHOW TO CHANGE THE OIL ON A KAWASAKI ZX6R | 2007 & 2008 KAWASAKI ZX6R
HOW TO CHANGE THE OIL ON A KAWASAKI ZX6R | 2007 & 2008 KAWASAKI ZX6R
มุมมอง 2733 หลายเดือนก่อน
4 quarts full synthetic oil (10w40) 17mm socket OEM kawasaki oil filter
SUPERCHARGER REVEAL | TIBURON BUILD PART #16SUPERCHARGER REVEAL | TIBURON BUILD PART #16
SUPERCHARGER REVEAL | TIBURON BUILD PART #16
มุมมอง 7903 หลายเดือนก่อน
IT FINALLY HAPPENED! Here I unbox my "new to me" NGM supercharger. I bought this used from another Tiburon owner. However, it has been rebuilt and should be ready to install. I am a bit far off from being able to install this though. I still need to do a few more upgrades before I am ready to throw this on there. Nonetheless I have it in my possession and it will be ready when the car is! I don...
COLD AIR INTAKE INSTALL | TIBURON BUILD PART #15 | AEM INTAKECOLD AIR INTAKE INSTALL | TIBURON BUILD PART #15 | AEM INTAKE
COLD AIR INTAKE INSTALL | TIBURON BUILD PART #15 | AEM INTAKE
มุมมอง 8224 หลายเดือนก่อน
I have been getting crap about the intake on my car since my first build video. It was never meant to be permanent! Today we finally replaced it with what should've been there all along. This is an AEM cold air intake. I opted for the blue piping to match the rest of my engine bay. I am happy with the quality! Words of wisdom for beginner builders... Do NOT buy the short ram intakes. They are n...
SHORT THROW SHIFTER INSTALL | HYUNDAI TIBURON BUILD SERIES PART #14SHORT THROW SHIFTER INSTALL | HYUNDAI TIBURON BUILD SERIES PART #14
SHORT THROW SHIFTER INSTALL | HYUNDAI TIBURON BUILD SERIES PART #14
มุมมอง 1.1K5 หลายเดือนก่อน
Welcome back to another build video. Here in part #14 I install a Ralco short shifter. The process is very easy and should only take about an hour. The only tool needed is an 8mm socket. Thanks for watching!
TWO YEARS OF HYUNDAI TIBURON OWNERSHIP | EVERYTHING I'VE DONE SO FAR | FUTURE PLANSTWO YEARS OF HYUNDAI TIBURON OWNERSHIP | EVERYTHING I'VE DONE SO FAR | FUTURE PLANS
TWO YEARS OF HYUNDAI TIBURON OWNERSHIP | EVERYTHING I'VE DONE SO FAR | FUTURE PLANS
มุมมอง 9K7 หลายเดือนก่อน
I have owned my Tiburon for two years now, and it finally looks like a different car. There's a lot more to do but I am happy with the progression so far. Here's everything I've done! If you like these mods and would like to do them to your car, check out the Tiburon playlist on my channel for all the "how to's". Have questions or inquires, please send them to my email: Taylor@taylorhaug.com Ch...
Approved Build #10 - LS Swapped Camaro 💥 #camaro #chevy #lsswap #classiccarsApproved Build #10 - LS Swapped Camaro 💥 #camaro #chevy #lsswap #classiccars
Approved Build #10 - LS Swapped Camaro 💥 #camaro #chevy #lsswap #classiccars
มุมมอง 3.6K9 หลายเดือนก่อน
HYUNDAI TIBURON INTERIOR DOOR HANDLE REPLACEMENT | TIBURON BUILD PART #13HYUNDAI TIBURON INTERIOR DOOR HANDLE REPLACEMENT | TIBURON BUILD PART #13
HYUNDAI TIBURON INTERIOR DOOR HANDLE REPLACEMENT | TIBURON BUILD PART #13
มุมมอง 3.9K10 หลายเดือนก่อน
Here in part #13 I replace the interior door handles. I had to replace these because I broke my driver side door handle, and because they were scratched and looked terrible. Be patient and take your time. If you have questions about something I did then let me know down in the comments section. Thanks for watching!
Approved Build #9 - Honda CBR 954RR 👑 #honda #hondacbr #motorcycle #cbr #cbr954rr #motorcyclesApproved Build #9 - Honda CBR 954RR 👑 #honda #hondacbr #motorcycle #cbr #cbr954rr #motorcycles
Approved Build #9 - Honda CBR 954RR 👑 #honda #hondacbr #motorcycle #cbr #cbr954rr #motorcycles
มุมมอง 4.1K10 หลายเดือนก่อน
TIBURON BUILD PART #12 | CARBON FIBER HOOD RESTORE & INSTALL | VIS RACING CARBON FIBER HOODTIBURON BUILD PART #12 | CARBON FIBER HOOD RESTORE & INSTALL | VIS RACING CARBON FIBER HOOD
TIBURON BUILD PART #12 | CARBON FIBER HOOD RESTORE & INSTALL | VIS RACING CARBON FIBER HOOD
มุมมอง 1.3K10 หลายเดือนก่อน
In this video we install a carbon fiber hood on the Tiburon. But before we can install it, we have to restore it. I was able to pick this hood up for FREE. Yes, for free. If you'd like to see that video, please see my "1000 subs special". The hood is a "OEM Style VIS Carbon Fiber Hood". The fitment is okay, all the lines match up perfectly. However, closing the hood has to be done very carefull...
Approved build #8 - Dodge Ram W150 🔱 #dodge #dodgeram #cummins #truck #shortsApproved build #8 - Dodge Ram W150 🔱 #dodge #dodgeram #cummins #truck #shorts
Approved build #8 - Dodge Ram W150 🔱 #dodge #dodgeram #cummins #truck #shorts
มุมมอง 99311 หลายเดือนก่อน
TIBURON BUILD PART #11 | NEW RIMS | ROLLING AND PULLING FENDERSTIBURON BUILD PART #11 | NEW RIMS | ROLLING AND PULLING FENDERS
TIBURON BUILD PART #11 | NEW RIMS | ROLLING AND PULLING FENDERS
มุมมอง 1.9K11 หลายเดือนก่อน
I HATE BLACK RIMS! So then why did I install them on my car you might ask? Well, ultimately the Cosmis Racing XT-206R rims are the rims I wanted, only in white. However those rims brand new would cost me an arm and a leg. This is a budget build so I am doing this on as little money as possible. So I found a set of used ones for half the price and threw on a set of used tires as well. Half the p...

ความคิดเห็น

  • @snguyn796
    @snguyn796 วันที่ผ่านมา

    Ghetto exhaust tip

  • @robertgergely9407
    @robertgergely9407 วันที่ผ่านมา

    I agree with everything except mileage, the 2l model has 20-21 mpg witch is not so good for a 2l.

  • @Famtab-v2h
    @Famtab-v2h 2 วันที่ผ่านมา

    As a guy who wants the gsr 750 im excited to get one in my nesr future even to rebuild

  • @vinnyc.1265
    @vinnyc.1265 2 วันที่ผ่านมา

    Tiburons are such fun cars. I have had mine for 17 years. Supercharged and Tuned. Could make a video.

    • @taylorjhaug
      @taylorjhaug 2 วันที่ผ่านมา

      Yes please make a vid!

  • @razpet
    @razpet 3 วันที่ผ่านมา

    nice but where can you find that please ?

  • @mackcummy4976
    @mackcummy4976 3 วันที่ผ่านมา

    Before I got my turbo RSX-S I test drove the Celica and Tiburon. I also bought a 2005 RSX-S for only $1650 here in Canada in 2020. It had a newer clutch, brakes and tires. The paint sucks and it has a rebuilt title. The body is rust and damage free except for some dings. It runs and shifts like a dream. Had to do spark plugs. The RSX has a great aftermarket for parts. At one point there were like 6 turbo kits and 3 SC kits available and like 10 or more companies make exhaust parts and intakes and all that.

  • @mackcummy4976
    @mackcummy4976 3 วันที่ผ่านมา

    It's 172 hp and the 4 banger is only about 138. The Civic Si EP3 was 160 hp and the RSX Type-S was 200.

  • @LudovicBergeron-x3j
    @LudovicBergeron-x3j 6 วันที่ผ่านมา

    Yeahhhhh. But before all the bodywork you should work on the engineg and get that nice spercharger in (BTW love the blue aesthetic) So you can go to a strip and get used to 400hp on a light car. Love the channel I would just like you to be carefull and not bur yourself out go at your pace and if you ever need take a break take it! We wont be mad. XOXOX

  • @noway1334
    @noway1334 6 วันที่ผ่านมา

    I want order thise spoiler guys im live in kuwait can any one put any site that ships to kuwait

  • @teunb5089
    @teunb5089 6 วันที่ผ่านมา

    Good stuff man, can’t wait to see the end result

    • @taylorjhaug
      @taylorjhaug 4 วันที่ผ่านมา

      Thanks, me too!

  • @nicolasvolf2086
    @nicolasvolf2086 7 วันที่ผ่านมา

    Make more videos about tiburons please, love it

  • @The_Hyundai_Guy
    @The_Hyundai_Guy 7 วันที่ผ่านมา

    Heck yeah can’t wait to see your tib finished up!

    • @taylorjhaug
      @taylorjhaug 7 วันที่ผ่านมา

      You and me both lol

    • @The_Hyundai_Guy
      @The_Hyundai_Guy 7 วันที่ผ่านมา

      @@taylorjhaug haha it’ll be worth the process 👌🏼

  • @BWTECH0521
    @BWTECH0521 8 วันที่ผ่านมา

    0:43 I love how you didnt' edit out the mess up. I do this like 50 times when I make my videos haha. I got a good chuckle out of it. Anyways, great video as always bro!

  • @BWTECH0521
    @BWTECH0521 8 วันที่ผ่านมา

    I'm so excited for this!!!!!!!!!!!!!!!

  • @NotxKaapi
    @NotxKaapi 8 วันที่ผ่านมา

    Do you maybe know where could i get thoes bumpers?

    • @taylorjhaug
      @taylorjhaug 7 วันที่ผ่านมา

      They don't sell anymore I don't think

  • @BWTECH0521
    @BWTECH0521 8 วันที่ผ่านมา

    making big moves!! Can't wait for the next update :)

    • @taylorjhaug
      @taylorjhaug 7 วันที่ผ่านมา

      You are too brother!

  • @theliltibby
    @theliltibby 9 วันที่ผ่านมา

    Hell yah new Tiburon video 🙌🏼

    • @taylorjhaug
      @taylorjhaug 7 วันที่ผ่านมา

      More to come!

  • @PORRRIDGE_GUN
    @PORRRIDGE_GUN 10 วันที่ผ่านมา

    Looks. Reliability. Value for money. All round, the best car I've ever owned. Downsides. Only 2. Crap handbrake and turning circle of a supertanker

  • @LudovicBergeron-x3j
    @LudovicBergeron-x3j 11 วันที่ผ่านมา

    you should go to the dyno and get a tune when you put the supercharger I think you can pull at least 250 300hp Love the channel good luck with the build😍😍

  • @topGu
    @topGu 13 วันที่ผ่านมา

    The Hyundai Coupe is such an underrated Car. Got mine for a year now and i realy love thsi little Racecar. Such a nice Car

  • @razpet
    @razpet 14 วันที่ผ่านมา

    nice work dude, I'm not so patient to disassemble/reassemble everything properly 😭

  • @Shaw9.81
    @Shaw9.81 15 วันที่ผ่านมา

    you never seen mine😂 but it looks good

  • @alexmegyeri3050
    @alexmegyeri3050 15 วันที่ผ่านมา

    Nice job and you did everything except the stator cover (I would have gone Okem) as I would have. Well done.

  • @tamimahasan5209
    @tamimahasan5209 17 วันที่ผ่านมา

    Hi there, I am from YT Comment, I saw that In your channel have many problems, That's why your channel is not growing. Problems: 1. Title too long-not SEO friendly 2. Description too short-not have keywords 3. tags too short-not high rank volume tags 4. Not doing checklist and backlinks Mainly you not doing SEO your videos. You have to do SEO score at least 100/80. But, Now your SEO Score is 0. So, If you can fix, Your videos will reach to more people and you can generate sales, because, YT algorithm can know about your videos. Do you Interested to fix these problems? I am waiting for a reply. thanks, sakib

  • @cerdobueno
    @cerdobueno 17 วันที่ผ่านมา

    looking gtreat man, i want a tiburon too!

    • @taylorjhaug
      @taylorjhaug 17 วันที่ผ่านมา

      I have one for sale rn!

    • @cerdobueno
      @cerdobueno 17 วันที่ผ่านมา

      @@taylorjhaug im from spain... XD

  • @Stiksfishingchannel
    @Stiksfishingchannel 18 วันที่ผ่านมา

    Great vid thanks for sharing!!

  • @metalmachine555
    @metalmachine555 22 วันที่ผ่านมา

    Hello, how much did you pay for that whole kit and how did you find it?

    • @taylorjhaug
      @taylorjhaug 22 วันที่ผ่านมา

      It's a used kit. You have to search forums and Facebook

  • @SoLo-oq2im
    @SoLo-oq2im 23 วันที่ผ่านมา

    How many miles does your Tiburon have?.....i have a 06 tiburon with 158,000 miles on it.....i dont want to modify it because of its high mileage.....what are your thoughts?

    • @taylorjhaug
      @taylorjhaug 23 วันที่ผ่านมา

      Mine has 90,000 What mods do you want to do? I would honestly say you’re fine to do mods. As long as they’re done properly!

    • @SoLo-oq2im
      @SoLo-oq2im 21 วันที่ผ่านมา

      @@taylorjhaug I have an aftermarket exhaust with a silencer on it.....the previous owner welded the silencer to the exhaust so that it would not be removable.....its just a small weld on the very bottom of the exhaust.....dont know why he would do that...I'm thinking of removing the weld.....I bought a file to file the weld off, but its proving alot harder than i thought....

    • @taylorjhaug
      @taylorjhaug 20 วันที่ผ่านมา

      @@SoLo-oq2im Why not just cut the silencer out and replace with a straight piece of pipe if that's your goal?

    • @SoLo-oq2im
      @SoLo-oq2im 19 วันที่ผ่านมา

      @@taylorjhaug I went and had the silencer removed....car sounds a lot better....thanks man for taking the time to reply....

  • @cameromnartin
    @cameromnartin 23 วันที่ผ่านมา

    Love your car & vids man, keep it up! You've definitely helped me out a few times when I'm looking through videos. You might wanna look into the PS vent drink holder, I think it's a Koren part, but I put one in mine & love it.

  • @cc3775
    @cc3775 23 วันที่ผ่านมา

    Wait until you have to do the clutch. Then tell me how easy it is to work on. 😂

  • @peterjohnson9438
    @peterjohnson9438 24 วันที่ผ่านมา

    That's actually not the FL1, it's the original GK. FL stands for facelift - FL1 was 2005-2006, and FL2 aka. SIII is 2007-2009.

    • @taylorjhaug
      @taylorjhaug 24 วันที่ผ่านมา

      You're right, I make these videos so fast sometimes I say the wrong stuff lol I am going FL1 with my new headlights so I am just all messed up

    • @peterjohnson9438
      @peterjohnson9438 23 วันที่ผ่านมา

      @@taylorjhaug yeah, same; I'm having fitment issues with the FL1 bumper on the GK bumper supports; it's going to need some drilling and hammering

    • @taylorjhaug
      @taylorjhaug 23 วันที่ผ่านมา

      Yeah I hate when stuff isn’t just plug and play. Have to buy the wire harness from shark racing to switch the headlights over which sucks. Why not just make them interchangeable? Lol

    • @peterjohnson9438
      @peterjohnson9438 23 วันที่ผ่านมา

      @@taylorjhaug mine were. :) it's a regional thing; from what I recall the 02-04 headlights in the USA had parking lights/DRL bulbs but the 05-06 lights eliminated them, and so used 4 pin connectors instead of 6 pinners for the main light connection. In my region the parking lights are mandatory by law so my 05 headlights still have a 6 pin connector that is plug and play. I'll do a writeup with pictures about it on the forums at some point.

  • @ilcooldj
    @ilcooldj 24 วันที่ผ่านมา

    anyone else thinks this is not a re-build, but rather a big service? changing spark plugs, oil, coolant & replacing few broken plastics here & there doesn't qualify as rebuild in my book, sorry!

    • @taylorjhaug
      @taylorjhaug 24 วันที่ผ่านมา

      I’m a beginner not an expert bike builder. For me this was a rebuild. Sorry if you feel otherwise. But as a rookie this was a big deal for me.

    • @ilcooldj
      @ilcooldj 24 วันที่ผ่านมา

      @@taylorjhaug hurting your feelings wasn't my intention at all, i apologize if i did. You might want to twist your titles though; "Complete Rebuild" kind of insenuates ...well a complete rebuild: i.e. (taking the engine out, valve clearances, shims, forks rebuild, chain, sprockets, clutch assembly, master cylinder, etc.....

    • @taylorjhaug
      @taylorjhaug 24 วันที่ผ่านมา

      @@ilcooldj I agree! No hard feeling here. I appreciate your feedback, really. I don't take any criticism personally. I have learned so much since I posted that video. I hope my next one includes all of those things!

  • @metalmachine555
    @metalmachine555 24 วันที่ผ่านมา

    Hi, just buy an AEM air bypass valve to prevent water problems

    • @taylorjhaug
      @taylorjhaug 24 วันที่ผ่านมา

      That hasn’t worked for a few people. Still got water! This was, in my opinion, the only way I could be sure nothing would happen while daily driving. Everything together was only $40 so can’t go wrong

    • @metalmachine555
      @metalmachine555 22 วันที่ผ่านมา

      @@taylorjhaug oh I see :(

  • @haydenjones9786
    @haydenjones9786 24 วันที่ผ่านมา

    Another good video!

    • @taylorjhaug
      @taylorjhaug 24 วันที่ผ่านมา

      Appreciate you 🙏

  • @motovlogjoni
    @motovlogjoni 25 วันที่ผ่านมา

    i found one for sale here in thailand where im living.. no joke, only one! The owner told me that probably have less than 10 in the country.. but im thinking to buy it, its such a cool car... he selling for around 10k usd but its a normal price for a second hand 2008 car here. However im afraid i cant ger parts if need as it is a freaking rare car around here

  • @mopora71
    @mopora71 27 วันที่ผ่านมา

    El antiguo dueño se observa que no tenía plata para mantenerla, todo era improvisado....🤦👍

  • @_saveoursouls_
    @_saveoursouls_ 27 วันที่ผ่านมา

    My uncle has a paid off tiburon he doesn’t use so imma fix it up and make it my own

  • @rootsuk6303
    @rootsuk6303 28 วันที่ผ่านมา

    Great video .thx . About to replace my head light cluster on my 05 60 and was wandering if any one can advise the process of removing the front fairing . Just a simple run down ? I tried to slow this vid down but couldn’t see which fixings needed undoing ? ( rookie here )

  • @gelgoorx
    @gelgoorx 28 วันที่ผ่านมา

    Lilmidwest has some really good videos on performance upgrades

  • @Isaac-vn1sv
    @Isaac-vn1sv 29 วันที่ผ่านมา

    Hi, i own a slow Hyundai accent 1.6 around 100hp straight piped xD and its fun but im looking for this tiburon,(v6) its good difference still reliable?

  • @kanggoo57
    @kanggoo57 หลายเดือนก่อน

    Ive been looking to pick up a v6 one, i want one so bad :;(

    • @taylorjhaug
      @taylorjhaug 29 วันที่ผ่านมา

      This one is for sale if you’re interested!

    • @kanggoo57
      @kanggoo57 29 วันที่ผ่านมา

      @@taylorjhaug Im in europe sadly :)

  • @LetsGoPats819
    @LetsGoPats819 หลายเดือนก่อน

    You bought it because you love changing clutches? lol

    • @taylorjhaug
      @taylorjhaug 29 วันที่ผ่านมา

      I don’t get it lol

  • @spicana
    @spicana หลายเดือนก่อน

    Solid review and accurate. Had my Tiburon for over 17 years and now is Turbo charged to solve the underpowered problem. Still looks great after all those years.

    • @taylorjhaug
      @taylorjhaug 29 วันที่ผ่านมา

      Hell yeah! What route did you go with your turbo?

    • @spicana
      @spicana 29 วันที่ผ่านมา

      @@taylorjhaug The EVO Turbo fits pretty well

  • @BruceDanton-xw6eg
    @BruceDanton-xw6eg หลายเดือนก่อน

    Seems very nice there too. I am british and well done too

  • @ludde1849
    @ludde1849 หลายเดือนก่อน

    hey man where’s the zx7 at? i was hoping to see you rip it but i don’t see any videos after the engine drop

    • @taylorjhaug
      @taylorjhaug 29 วันที่ผ่านมา

      It’s a long story…lol don’t worry I still have it 💪

  • @ludde1849
    @ludde1849 หลายเดือนก่อน

    you’re a saint man this is going to be so much help for my engine swap i really appreciate this 🫡

  • @nrom5960
    @nrom5960 หลายเดือนก่อน

    My first car I bought, loved it and regret selling it!

  • @Kobe-mn9bt
    @Kobe-mn9bt หลายเดือนก่อน

    I need to get the green fairings for mine, the yellow doesn't hit the same

  • @codysharp9790
    @codysharp9790 หลายเดือนก่อน

    Does anyone have the link for the ebay exhaust?

  • @andrewvalles8274
    @andrewvalles8274 หลายเดือนก่อน

    I would love to buy it for a good price

    • @taylorjhaug
      @taylorjhaug 29 วันที่ผ่านมา

      It’s for sale! If you’re actually interested shoot me an email. I’d like to sell to a fellow subscriber / Tiburon enthusiast