วีดีโอ

Have the same since 1998.. Always have had some problem booting and glitch crashes in win98se.. I think the AGP video does not play well with the K6-2 450 processor timing..

damaged it with undocumented 124 mhz fsb now southbridge is damaged no pci and ide but my has only 512 cache

I still have and run as a secondary rig my Z97-Pro Gamer mobo with 4790k. Motherboard is in still near-perfect condition after all these years and the 4790k stays permanently overclocked on all cores to 4.5Ghz at 1.18v. It has an RTX 2070. I mostly use it for older games and plan on keeping it for awhile still. It does actually average 55-58fps in Cyberpunk (I couldn’t NOT try it out) on mostly high settings and some RTX settings on. I do run it with Fidelity FX on to do that tho.

My set up 😂.

They had to give you that so you had something to visualize... Man i dont miss text based games.😂😂

Does Rtx 4060 work on Z97-K mother board?? It's PCI 3. Right?? I have the Z97-k and Intel core i7 4790k Honestly i don't have money to upgrade the whole pc for single processor

i have similar,, power switch on mine is broken, but it rebooted for like 15 times before my 35 cd stopped.. packard bell also.. my reboot switch works fine..

its odd that we went from heat spreader aka ihs to direct die and now back to heat spreader aka ihs, Direct Die can improve cooling but does make it more suscipital to overheating burning the chip, with incorrectly mounted heatsink, no thermal paste, or no heatsink for quick testing.

So I just got a Tandy 2500 sx/20. I went down that floppy cable that had the 9 hole punches, and punched it in the same place next to the motherboard. That cuts those grounds. Then used a standards 1.44mb floppy drive. But had to find one which could be set by jumper to S0, not the "normal" S1. Bought a 4 pin molex to floppy power adapter, and it works great on one drive. I got the gotek to work instead of a drive, because floppy drives with drive select is almost as hard to find as an impossible to find tandy drive. My tandy drive motor died.

I love the pc chips boards. No clue why they did the no cash cash chips. I have 3 boards, recapping one now. They got a bad name from fanboys of other models. Pc chips was half the price and just as good or faster on most of the boards. And now the price of them is up because of the no cash cash boards. And the people that trashed them back in the day are buying them up so they can hipe them up , to resell at a big profit.

A new OCR video! Fu*k yeah!

I built my first PC in like 2002 so I've always been use to some feature rich motherboards. It is wild to me to see one built in port on that back panel connector. Like, that motherboard is just ram, processor, and bus?

Very good card! to bad no win9x drivers! as of all parhelia cards. should be a dx8 card.

my socket 7 runs win98 and with setmul (perfect with pentium mmx) would give a huge range of game coverge. i went with win95 for my 486 system. it odd the power supply is rotated like that above the motherboard.

I was wondering what happened to you,. Tough choice, to retrobright or not.. does the plastic smell like stale tobacco? Otherwise I'd keep the "patina", like they call it with old cars.. no one seems to use that term with old computers.

Welcome back !

I remember this PC. It was my 1st. It had tabworks... right before windows 3.1 👌👌👌

ايش فائدتها

I wonder why people are using retro computers for gaming sh*t where they never were designed for 🤔

cool custom built computer

I have an asrock board circa 2007. Sad that it's leaked but i can easily repair it because its only 6 caps

Have this same card in my win98 rig it is a bit overkill to be honest 😂

У меня есть такой же с гарантийной пломбой

I just found one, looking for a power supply now to see if she works

i found the green ones dont work well above ata33 speeds or so, i have black pcb ones that work better with faster controllers

Nice video! I thought the case was originally beige and spray painted black. If that is originally all black then it is quite unique since most Baby AT cases are beige. Even beige Baby AT cases especially with the LED lights are becoming rarer and quite expensive in the used market. Also Old AT style power supply are becoming rarer and branded ones like that Antec 250 may be worth the effort to check and if feasible, repair. The burnt connectors can be replaced using the cheap ATX to AT cable adapters available on online shopping sites.

i just pulled mine out of the closet. i thought i got rid of it!!!! still got manuals cables has 3 gb ddr 400 and athlon xp 3000+

I had a Compaq Presario CDS 833.

Thats strange. The cf card size (number of 512 byte sectors) is contained in four 8-bit bytes in the CF Ident block that are stored in the cards permanent memory, not in the usable memory. So I can’t see how a different adapter would make a difference. Was the test done with the same program or OS?

This was my first pc. Loved it.

I have this same board!

I will share some more knowledge on the motherboard and video card that came with it. They was both manufactured in Austin, Texas at a company named Solectron. I know this because I was a production functional technician that troubleshot the defective boards. We manufactured Gateway 2000 boards until Acer bought Gateway.

A dream find!!!

Comprei uma placa idêntica essa sua , mas aqui no Brasil o preço das placa mãe antigas subiu muito , pessoal está superfaturando o colecionismo,

I was under the impression that you had to put a special OverDrive "upgrade" CPU into that blue socket, and not just a regular 486 CPU. Obviously that's not the case if you got this one working, here.

Wow, that takes me back. I put together a quad PPro 200MHz system 20+ years ago for a video editing machine, replacing the dual Pentium 90 ALR Revolution MP server it had come in. It required a bunch of PCI and EIDE slots, so options were limited. That was a ton of fun to configure under Windows NT 3.51.

Hello my friend, I have the exact same hdd and adapter, but I cannot connect it to the computer. My computer does not have a 50 pin connection. how do i know this? how did you connect the 50 pin?

yeah nice system aside from the mess, very interested to see when you get everything cleaned up. id wish i could come across an mini AT class in that form factor for some of my lose boards.

soaking the card in baking soda+water to neutralize any acidic residue from the mouse droppings is the way to go, then super scrub it down with windex, and then soap/water, followed by a dip in some 91% or higher alcohol to displace the water, and finally a hit with a hairdryer, which should take care of the rest. Ideally, you want the concentrated blue Dawn and a manual toothbrush you don't care about. It should clean right up. Solder won't look the best, that's for sure, but it'll just be surface oxidation and should still work just fine. I had a similar issue where I found one of my Gig switches got peed on in the garage before I moved and had to tear the entire thing down. it was absolutely disgusting and I had to bleach all the plastics. but, after doing the above and replacing a couple of capacitors that didn't look the healthiest even prior to the mouse incursion, it's been working flawlessly here at my desk for the past year and a half without giving me an issue. so yeah, you may need to replace some capacitors, but in all honesty the audio output caps should be replaced on those sound blaster cards anyway. whatever the capacitance value is plus a bump up in voltage a bit (i.e. 16v goes to 25v, 25v goes to 35v, etc.) and two 0.1uF bipolar film capacitors should be placed on the underside. Usually these are see-through or dark green dipped caps, and can be found in any junk power supply made within the last 15 years. While this isn't to Creative's spec, it definitely helps, if the work done to an Awe64 Value here is anything to go by.

Vietnam

I have the T230 Dual CPU board also.

a nice one :D i love this card i have a pic version this but not did it install my power mac g3 and graphite pci g4 :P any idea how install good this mac os 9 to 9.2.2 forward many thanks :)

CT3600 is not awe32, is SB32

One of the best VGAs of its time, it was considered as reference card for 2D graphics.

Any links to win9x drivers?

3 Floppies!?!

If you wanna keep that console all together and maybe you have some they drive copying stuff I can copy my drive so that way you can get that front panel to work because I’m getting the same consul

Even this mobo is 4 slot but mine is 2 slot 😑

Hi there I bought the same adapter off eBay about 5 years ago, and never got to use it. The other day I decided to clone an old 50 pin drive (from an SGI octane computer) using an Ubuntu setup I have with XW8000 workstation. The “new” 50 pin drives i got won’t spin up using the adapter. Any ideas of why that is? I would greatly appreciate any input.