วีดีโอ

Shane-You seem to be the deer fly expert on youtube! I have deer flies in my yard. They seem especially drawn to the cypress trees there. Please give me your thoughts on this. Blue balloons tethered about 6 feet off the ground and coated with Tanglefoot and filled with helium. A little breeze would give them movement. Inexpensive to replace if they pop or deflate. If it's plausible I'd love to see a video of you experimenting with it.(I can't bring myself to wear a blue Solo Cup on top of my head)

WIthout my glasses that looked like Kill Dear Flies Without Loading Shells. HA!

Wonder if it works on the front porch when yer mother in-law comes to visit……🤔😳😳

Well....... Believe I also found a good use for all those Bud Light cans that NOBODY buys any longer!!!!

Also, so you don't have to adjust the cutting plate after grinding?

By reverse you mean reverse for the mower. Not the drill.

They just moved into hwere i live in the last 2 years. Never heard of or dealt with a deer fly prior. We just had horseflies. Deerflues are like horseflis on steroids. As soon as they land, the bite. Horseflies take a couple seconds first.

Insofar as I know, that tanglefoot stuff can also get a bird or squirrel on it and sticking so it can't get off. The beastie will die a slow death if there's nobody around to free it up. Let's be aware of that.

What about a stand that waves in the wind - maybe shaped like a person - and painted blue and covered with that goop - would that work to keep the little vampires off your property?

I keep seeing this stuff I'm afraid to use it because ours are around the patio and I have hums that are around to. I'm worried about the tiny birds will get caught in it. Do you know?

Video was great, but I built the trap (which was relatively easy) and it only captures Japanese beetles. Still getting harassed by horse flies at the pool. Any ideas?

Did I miss the part about the natural gas hook up?

Thanks for removing the mystery of how to sharpen a reel mower. My Craftsman mower had a much different system, but the fundamentals were the same, and after 20+ years of not sharpening the blades the thing cuts like new.

They are the bugs from hell !

Unbelievable the trouble we have to go through to deal with these SOB's! They can definitely ruin your day. FYI, my Aussie neighbor turned us on to tea tree oil to help with these and horse flies. It works. I put a few dabs on my collar, a few on the bill of my hat, and front and back of my shirt and it actually keeps them away...until you sweat through it, of course.

What does it look like on an older model?

In your opinion, Would a smaller one work for a pool area?

That was my problem. Spot on, thanks!

Simple to the point thank you

Where do I find the sleeve for the bolt in the video?

Got all the goodies and about to construct.... Any of y'all know how well this will work on the muther effing deer flies as we have BOTH and the deer flies are effing relentless!!!!!

Anyone put this to practice? What attracts the flies to the trap? Just trying to make sense of it. Why plexiglass?

Does this also sharpen the bedknife or is this a whole different process very confused.

I owe you! I have a 2000 863 I always new bob car is at the bottom of reliability and quality, but the dealer service plays the biggest part, they charged me for that and many othe things when I took ot in. It happened again 6 months later, I was about to take it back to them, even when. They told me they ware not going to do waranty, but I saw your video. Thanks !!!

i feel like i needed to know this was going to involve a torch, which I do not have :(

You made it look so easy that I feel confident in trying it. Thank you

Can I use a whitening toothpaste rather than valve grinding compound?

Well good job on building horse fly trap, but is there a before and after video showing that your contraption works? I need proof, no disrespect intended!

Thanks 👍

Thank you for a great review.

A def hack you can bypass the computer on the transmission there's a sensor or solenoid run a ground wire and find a fused power wire you will need to add a resistor to the power wire I also have used a resistor on the low oil cutoffs just unplug the low oil cutoff and put a resistor in the plug

Wow, That is so simple compared to filling each one! I could get it sharpened by a sharpening service for $50 dollars. My local guy does about 50-60 a season. I went to drop it off to him his jig broke and he can not weld it back anymore! This is a great video in perfect timing! Thank you! 🌠🌠🌠🌠🌠

Great! Do you run the skid steer at a certain rpm when you push the button? My bobcat doesn’t die (or at least after more than a minute it doesn’t die)

Terrible! You said the others were complex😂

Very Good video. I had a question about the valve paste. Do you have to keep applying it over and over during the 8 (+/- minutes) ? Why doesn't it just scrape off after the first pass (1 rotation)?

great idea

Yo that is a freaking amazing good idea

Awesome information can't wait to try it out.

Mantap

If has been sitting for a while possibly a hydro value stuck open or shut but electric over hdyrdo so could be wire or the cylinoid it self. That bare wire I'd wrap with electric tape to keep it from rubbing the coating off. I liked the case 1845 1840 they was good machines the 90xt the last good case the caterpillar 289 track machines are easy to get to to work on but the first caterpillar 226 was based of the Melroe IR machines with case either case controls hand or the new one handle front and backwards and the other loader and bucket but the caterpillar 259 289 very good machines and to my on knowledge don't catch fire. I just say this because I rented a new bobcat and the sells guy tells me to get renters insurance because there is a hose that comes lose in the bottom and one has caught fire so that threw me off and would not buy one after that you'd think if knowing that's a problem they'd fix it but hey insurance works I guess. The 743 843 melroe were good machines when IR took over they went down hill. They had Kubota motors in them or duiez diesel. The John deere loders alright but had problems with a bolt that keeps the bucket pins in and they fall out when grading more than once. The track machines don't rut as bad and beat you up the tracks lgp. The early new Holland loaders good before they changed but the late 80s early 90 new Holland good the design put the motor out back a bit more for weight and the loader arms go up and out for loading trucks. The high bed trucks every loader is at is peak just to dump so depends what the operator likes but the high body beds you have to get your tracks or wheel right on the rear tires and may bust a wheel cap on the truck but thsts construction it happens nobody got killed

Question? Your using 1/4" mild steel Wouldn't 3/16 AR500 work just as well if not better for .22RF?

Power cycling the truck (off/accessory, without starting the truck) five times, clearing the code each time, allowed the truck to come out of limp mode and reset to 80km to limp

Thanks just had my bobcat t190 do same thing shut it off and when i came back to troubleshoot .i started it and it worked okay?

“10 other codes and performs service pop up” “My codes are cleared” 😂😂

Wearing a hat has always kept these annoyances from bothering me. A simple baseball cap, not a trucker hat like you showed.

😊😊😊😊

😂 you turned the camera away at the point I needed to see haha. My handle turns 45degrees and feels like it hits a hard stop. I can't pull it up. Does it need to turn a full 90deg? I don't want to try and leave it a bit at 45deg. If it only goes 45, I'll put a little leverage on it

Sir written in hindi on the screen

A reel mower is the real mower!

Little grease under that arm will help quite a bit too