- 64
- 768 954
JDP Doing Stuff
United States
เข้าร่วมเมื่อ 28 ต.ค. 2011
I create videos of things I do, weather it's repairing things or just goofing off. Hopefully some of my videos will help and/or entertain people along the way. If you like my videos, let me know. Also if you don't like them, I would like to know that too.
You can email me at: jdpdoingstuff@gmail.com for any questions.
Follow me on Twitter: @jdpdoingstuff
jdpdoingstuff
You can email me at: jdpdoingstuff@gmail.com for any questions.
Follow me on Twitter: @jdpdoingstuff
jdpdoingstuff
Cimarron "Man with no name" 1851 Navy Cartridge Conversion
Cimarron / Uberti 1851 Navy from The Good, The Bad and The Ugly Movie gun. This is in 38 colt (Long and short), 38 Smith & Wesson and 38 Special.
Not sure if it's historically correct, but it's an awesome shooter!
Not sure if it's historically correct, but it's an awesome shooter!
มุมมอง: 53
วีดีโอ
Springfield 1911 Limited Edition
มุมมอง 157วันที่ผ่านมา
This is a Springfield Armory Limited Edition 1911. It is a 'Mil-Spec' and they only made 5500 of these.
Henry 22 Lever Action
มุมมอง 532 หลายเดือนก่อน
Shooting my new Henry 22 Lever Action Rifle #henryrifle
New Running Boards for Nissan Frontier
มุมมอง 4243 หลายเดือนก่อน
Picked up some new Running Boards from Iron Bison to put on my Nissan Frontier. I ordered these off of eBay (Linked in comment section). In this video I go through the unboxing and installation, as well as a final look at them and how they look on my truck.
GameCube DOL 101 PicoBoot Install + New Battery + Blue Power LED
มุมมอง 3046 หลายเดือนก่อน
Installing the Raspberry PI Pico in a model DOL - 101 Nintendo GameCube Plus swapping out the battery and power LED. 00:00 - Intro 00:43 - Getting Started 02:23 - "The Chip" 03:37 - Solder the chip 09:40 - Top of board 20:30 - Fitting in the case 25:12 - Solder in the Pico 36:40 - Program the Pico 38:15 - Testing the cube 40:15 - Battery Install 45:45 - LED Install 49:12 - Final placement and t...
C64 Black Screen - Amateur Repair Hour!
มุมมอง 1187 หลายเดือนก่อน
Got this Commodore 64 for a good deal.. Well, I thought it was. Has a black screen and in this video I just show you what I did to fix it. It ended up being a bad memory chip and a kernel rom.
Atari 2600 Cap Kit install
มุมมอง 1278 หลายเดือนก่อน
Installing a cap kit to hopefully clean up the colors and display output. Atari 2600 Repair th-cam.com/video/9-zlPVJ6MYU/w-d-xo.html Thought I lost this footage, it was done about a year ago.
Weller Cordless Soldering Iron. Is it any good?
มุมมอง 2149 หลายเดือนก่อน
Using my old battery operated Weller BP860MP Soldering Iron to make an Atari 2600 Repro cartridge. Checking how hot it gets, It does get hot enough to do the job.
New Pietta 1860 Army in 2023! How different is it from one made in 1980?
มุมมอง 91911 หลายเดือนก่อน
I got a shiny new 1860 Army and in this video, I unbox it, Compare it with my old one (from 1980) and finally go out and shoot it. There will be a cleaning video later on. If you like this one.. Check out these other shooting videos Beretta 92fs - th-cam.com/video/ap_WTf42kQo/w-d-xo.html Ruger Mark IV - th-cam.com/video/6sHboVqLsiw/w-d-xo.html Browning Buck Mark - th-cam.com/video/SCWE3CLuO3w/w...
Jennings J-22 - Saturday Night Death Cannon. Is it reliable? Or just plain poop...
มุมมอง 90111 หลายเดือนก่อน
Well, to say it's reliable is a lie.. This shoots most of the time with the right ammo, however jambs most of the time with CCI, Winchester, Aguila etc.. I did find that the Remington Bulk Pack (Not in the little boxes) works best in this little Saturday Night Death Cannon. Check out these other shooting videos Beretta 92fs - th-cam.com/video/ap_WTf42kQo/w-d-xo.html Ruger Mark IV - th-cam.com/v...
Sega Master System - Broken Trace Repair
มุมมอง 192ปีที่แล้ว
Sega Master System - Broken Trace Repair
Atari Flashback 8 Gold - Mod to add more games!
มุมมอง 1.7Kปีที่แล้ว
Atari Flashback 8 Gold - Mod to add more games!
Coleman Camper Air Conditioner vents fixed
มุมมอง 2822 ปีที่แล้ว
Coleman Camper Air Conditioner vents fixed
Cheap eBay Grips for a Beretta 92FS or M9
มุมมอง 4.9K2 ปีที่แล้ว
Cheap eBay Grips for a Beretta 92FS or M9
Any issues or failures on your Lite?
None at all.. This thing is solid!
@@JDPDoingStuff thanks for the response. I am unfortunately having issues. What kind of ammo do you use?
@@MacD2029 I usually use the Remington bulk packs, but this thing shoots everything I put in it. Is yours new? I got this one used. First thing I did was get a new extractor, as I was ordering some parts for my 10/22. I put the upgraded extractor in right away. Got it from Tandemcross. Also picked up one of their comps for it. Hmmm.. Maybe I'll need to do an update video sometime?
@@JDPDoingStuff I did indeed buy it new and it is bone stock. Only running CCI standard velocity and mini mag through it a follow up video would be awesome.
@@MacD2029 Awesome. Try different ammo. It may need to have a few hundred or more rounds ran through it. Does it fail to feed? or fail to eject? Also, would be a good idea when 'breaking it in' to oil it up.
Beauty! Picked one up at CAL RANCH on sale for $589.
That's awesome.. That's where I got mine!!! Hopefully you got a low serial number :)
@@JDPDoingStuff An impulse buy. Loved the green color, reminded me of the green hue that many parkerized WWII guns had. Not a low number, 35xx.
@@maxon-m3c Awesome.. Mines a 22xx. Supposedly, they have one in the 11xx range now. Just waiting for payday Lol
Since making the video how do you feel about the product after 4 years?
Still use it, and still works great!
"Only" five THOUSAND and FIVE HUNDRED of them. That right there is funny.
Ha! Yes.. Not much different than mil spec, but still cool.
@@JDPDoingStuff Does look nice, no doubt.
@@litsci4690 It does. And the action is great!
@@JDPDoingStuff I got one decades ago and converted it to 460 Rowland. Produces just over 1,000 ft. lbs. and launches brass into the stratosphere. Has held up so far, lol.
@@litsci4690 Wow! That's awesome!!
"Limited Edition," lol. They squirt paint on it instead of making the internal parts out of forged steel. Waste of money for a piece of paper and a dog tag.
Yes, they did 'squirt some paint on it'. And a bit more quality control on them. Why would you think it's a waste of money? It's not your money. I also have a rock island and it works great too but a 'cheap' gun as well, however is a bit 'rougher' and has a heavier trigger. To each their own I guess. I do appreciate your comment. Thank You.
It's a "distributor" special. Distributors will have the factory make up some modified versions of a standard item and order so many of them. TALO and Davidson's do this a lot. As far as future collector value, who knows? Takes about 20 years to determine this. I bought one because I liked it.
@@maxon-m3c Best reason.
How much you pay, there's one at my local store for 6ish
Mine was about there as well. If they have one there, ask them if they have multiple ones and you may be able to pick your serial number???
@@JDPDoingStuff ahh OK copy that
@@Randanator65 Nice thing about cal ranch (if that's where you find it) at least the one close to me, they have a layaway! :D
Bro you just saved me! I opened up my gamecube to replace the battery and clean the eject button but didn't know you have to keep the lid open when closing it back up. You need to be higher up on search results for gamecube lid switch, it took me like 2 hours to find this!
Great video, my gun is clean thanks to you.
Awesome! Thanks for watching...
I owned of these for 10 years. Maybe a half dozen jams no matter what ammo I used. Loved it!! I finally had to retire it because trying to clean it after a long shoot it just flat fell apart while trying to put it back together. I mean fell apart--- in pieces!! Well I only paid $70 for it. I'm surprised it lasted 10 years and maybe 1500 rounds.
Thats Awesome Ranger!
Where? Did you buy the kid at
Here you go. www.ereplacementparts.com/connecting-rod-and-piston-assembly-p-126497.html
Thank you for the video, very straight forward! I love my M9, best handgun I've ever owned!
Awesome Fox.. Thanks for the comment and for watching!
Could filling the ejection port down a Little & putting a stiffer spring in the magazine correct misfire?
I suppose it might.. I don't know for sure. Maybe someone in the comments with more knowledge about that would know?
I bought one new for $55 in 1987. It actually ran very well with MiniMags, the only ammunition readily available locally at the time. It did disassemble itself once during a string of CCI Stingers, long before I learned it wasn't made to handle hotter loads. Haven't shot it in decades, but have considered getting it out for tractor duty, loaded the way you mentioned. My current tractor gun is a NAA "Sheriff" mini-revolver in .22WMR.
OH!!! Wow.. I've heard of them doing that. On mine, the right side wood grip split and I had to glue it back together, but that's about it.
I have the same code where can I buy the sensor and what’s the number part
This is where I got mine. www.napaonline.com/en/p/DEN2344260
I found that putting RTV around the seal is a must. I changed one on a Honda and it still leaked. I didn't put RTV on it but it would have save me time if I did. Next time I will. Its cheap insurance. I changed a seal on a Chevy pickup and it was streaming out oil after I got done. I had to pull the trans again to fix it. I put ATV on it and it fixed it. I should have remember that for the honda.
Wow.. That's a good Idea. Thanks for the tip
I want get one
:D The Henry is very nice
What a beauty
Yes it is! Love this 22..😊
I used the gorilla brand water seal (same as flex seal) on the bow of my aluminum boat. It was leaking at the rivets. After applying it with a brush and giving it 48 hours to fully cure it hasn't leaked a drop in 3 years. And I drag it out of the water into the yard every Fall and back into the water the same way in the spring.
That's Awesome!!! My neighbor has this boat now, and has for a couple years. He still uses it and it still doesn't leak, however I still think hammering the rivets down is a big factor in that.
They are made for standard velocity ammo. You should never shoot high velocity ammo like Mini-Mag or Stingers. You should probably replace the firing pin and recoil spring every so often, though. I have one much like yours and it's a blast to shoot. You HAVE to keep it clean!
Yes.. All those things.. Keeping the maintenance up on it is key. Thunderbolt works the best with mine.
Hola mi amigo q me mejora ay al cambiar todos los capacitores digo si me puede orientar?
Hola, amigo. Si tiene exactamente este problema, en realidad solo necesitará cambiar un capacitor. Pero, si uno está defectuoso, el resto podría estarlo o lo estará pronto, por lo que es mejor reemplazarlos todos.
Ok prácticamente presenta el mismo problema no funciona el reseteo le agradezco su atención y su tiempo maestro 👍
where did you put your sd card?
The SD card is on the bottom in the serial port.
Is the spring guide rod plastic? Mine looks and feels plastic, and i was surprised by that.
It is indeed plastic. You can get 'upgrade' kits that give you an aluminum one.
@@JDPDoingStuff I mean it's just a guide rod does it have to be more durable than plastic?
@@RzVids It doesn't need to be. There are 10's of thousands of these out there and people haven't had any issues. Most people who swap them out want to because they don't trust it. I have shot thousands of rounds thru mine, and never had an issue. That being said, if it's mishandled specially when cleaning, it could bend or break. I've never experienced that though and don't personally know anyone who has.
Thank you so much for sharing your installation video on TH-cam! Your effort in showcasing the process is greatly appreciated and will be incredibly helpful to others. We are thrilled to see our product in action and are grateful for your support.
Thanks Guys.
This is where I got them. www.ebay.com/itm/134365060934?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=QCkZNEwgQ0a&sssrc=4429486&ssuid=6ZdZL3uGSqK&var=&widget_ver=artemis&media=COPY
What type of O-ring is used? Don’t want to take it apart then wait to find the right o ring.
When I bought my oil filter it did not come with an o-ring
If your not sure, I would call your local bike shop and order from there. At a minimum, they should be able to give you the part number that you can use to order one online. The OEM part number for the o-ring is 09280-54001 but you will have to confirm that. They used the same one for multiple bikes and multiple years, so it should be easy to get. Here is the parts breakdown for the bike with oem part numbers. Hope this helps you out. www.partzilla.com/catalog/suzuki/atv/1985/quadsport-lt230s/oil-pump
Damn I might have to check out this channel
Thanks Joe
Bought one today, reset button doesnt work. Wont be able to fix it like you, cuz im handsome and dumb. I enjoyed the video though. Thank you, greetings from Chile 🇨🇱
Ahh.. I bet you could do it.. It's a pretty easy fix.
Pyrodex pellets eh? 😳🙄
Ha! Yes.. They do work good.. Less of a mess
Thanks... helpful ❤
Your welcome.. Thanks for watching
Yo nice video but how to remove M4A1?
Are you meaning an AR M4?
Yes@@JDPDoingStuff
I see that you used the Hoppe's lubricating gun pil while cleaning out the bore, when should I use the bore cleaner solution that came with my Hoppe's cleaning kit?
When you see a bunch of gunk looking mud inside the barrel after shoooting is when you use the cleaning solution. Then lubricants. Try a CLP it does all in one
Perfect
Awesome
would something similar work for the flashback 5? Im mostly asking because if not its probably not even worth me cracking the thing open.
Unfortunately you can not do this on the flashback 5.
@@JDPDoingStuff like no way at all to add games?
Does it go fast ?
If I remember correctly, about 50mph
good afternoon My master system rubber control is defective, where can I buy the repair kit, thanks for the answers ?
I got mine off eBay.
Where do you order your parts from? I’ve been struggling to get anything. I have a 1987, 230 S sport quad.
I get most things off eBay.
Nicely done! Thanks for sharing. I think I can do this, thanks to you! You created the first template from your bed. What did you use to create the other templates?
I actually used the first template for the rest of them, then put them in the closet and trimmed them where they needed to be trimmed. Good Luck!
@@JDPDoingStuff Thank you for responding - and, so quickly! We are now subscribers! P.S. My wife suggests you sell your templates. With your vid and templates, people would be all set to tailer, trim and install! 🙂
@@drs3055 No worries.. Thank you for subscribing I appreciate it. My channel isn't just Campers! I never considered selling those... Hmmmm...
My dream
Awesome..
Good video. Straight to the point and you have a nice voice!
Thank you!
How often you clean it? Nice video tho! Really helpful
I clean mine after I take it out. Thank you for the compliment.
Love your content❤
Thank You..
Believe it or not these hold up to the recoil of 12 gauge. But you must use the small allen wrench to lock it in after making your adjustments. I have these on my semi auto bullpups.
That's Awesome John. I never thought about mounting it on a shotgun..
I wasn't sure they would hold up but they work great. Plus they look so cool on my bullpups.
Where can i find a performance carb for these?
If your going to do the carburetor, I'd suggest doing the cam and exhaust also. I did a quick search on google (suzuki lt230s performance carburetor), and amazon has some performance carburetors. I have no experience with them, but they are out there.
can you post the Flashback 8 notes.txt file you have in whole?
@penguinguy2079 Hey.. Here you go.. Enjoy. Command to start the adb service adb devices Copy the all-games.ini file adb pull /system/atgames/all-games.ini Allow modifications to the system folder adb shell mount -o rw,remount,rw /system Backup your original all-games.ini file to the system/atgames folder (all-games.bak)(In case you need to restore your unit). adb shell cp /system/atgames/all-games.ini /system/atgames/all-games.bak Copy the all-games.bak backup file adb pull /system/atgames/all-games.bak Add all the roms and art to your flashback using the push command. Once complete, do the following (remember, commands are case sensitive). adb push yourgame.a26 /system/atgames/Atari adb push yourgame.a26.png /system/atgames/Atari Copy the 'new' all-games.ini file you edited with the new games you uploaded adb push all-games.ini /system/atgames Restore the original read only state to the system folder and files adb shell mount -o ro,remount,ro /system Example of the INI file [Mouse Trap] File=atgames/Atari/MouseTrap.a26 Platform=Coleco Genre=Adventure Description=Don't get caught Note= \ Player Mode: Multi-player game (1-2) \ \ 1. SELECT button. \ Press the SELECT button to choose something. \ \ 2. Use joystick controllers. \ Edit this line. Use the player one, or left, joystick for one player games, and the player two, or right, joystick for the second player in two player games. \ Move with the joystick. Press the controller button to fire. \ \ 3. Difficulty switches. \ Difficulty switches may or may not function in this game. \ \ 4. Instructions. \ Press the controller button to begin play. I think
@@JDPDoingStuff thank you!
@@penguinguy2079 Your most welcome :) Thanks for watching
Is there any difference between a 922 and a 622 apart from bullet capacity? They both look pretty much the same to me
To be honest, I can't answer that question as I've never had the 622. That being said, anything is possible with enough money and know how Lol. But the thing I'd worry about would be timing. Although it 'Might' physically fit, there would be other parts to swap out to get that timing correct.
I just bought an old aluminum boat. It's been stripped down to the bare bones. I have not had it on the water yet. It snowed and the boat got a few inchs inside. Yesterday the snow was melting and I noticed water leaking out of the bottom of the boat. I'll probably get it on the water, bring a sharpie, then mark the leaks. I did this once before, we used real rivits to fix the leaks. A guy got underneath with the gun, I was inside the boat with the buck bar, or what ever that thing is called. After that I gave it a shot of bed liner. This was before flex seal was on the market. As far as I can tell none of the rivets has leaked. It's been a few years.
That's awesome. Yes, the rivets would play a part in all this. I did hammer down my rivets as well. The flex seal just went over everything. My neighbor has that boat now, and it still floats! Thanks for watching.
Thank you!
You're welcome!
Black&Decker owns Dewalt
Yes.. They do.
Did you forget to clean the lower?
Hey Steve... No, I didn't forget.. I Just didn't film a lot of it. In my older videos (like this one) I tried to keep them short, so I fast forwarded through most of it, but it starts around 7:50 mark and is really only a few seconds long. Cleaning the lower is the same as a regular AR. I did have a detailed cleaning on one, but the Tub e said it violated their terms so I had to remove it. These days, I just let the videos go even if they are long :D Thanks for watching buddy... Rock on!
Great idea about wetting oil filter by removing spark plug!! Thanks a million for this upload man!! Safe riding & have a good one!!😀
Your welcome.. Rock on!