วีดีโอ

Get a battery caulk gun and you’ll never look back!

What would a boat like this sell for?

love your series man. great job

Que#tion on the bottom two pieces. Would you reverse that lap joint f you did this again. I’m just curious knowing how the boat goes through the water. ? Thank you

Wow, you’ve done a remarkable job. Thank you for sharing. 👍🇨🇦

Wow, you’ve done a remarkable job. Thank you for sharing. 👍🇨🇦

A shit , better use it for your dog

OK

What size engine do you recommend for this boat?

🙏🍺

What do you think about shrinking that boat down to a 14 foot boat? How do you feel that would work with your drawings?

When you put those 2 coats on the plywood at the beginning do you also coat the scarf cut or do you leave it raw?

You lost me with the drain plug tube with the bolt washers and nut. What is that process for. I have used a lot of 5200 and you did a nice cleanup on it. Love the series. I missed my calling. Your jigs and techniques are impressive.

Is the epoxy that you are using UV friendly?

where is the part 5 of building center console . nice video. .keep it up

Please wear a dust mask when sanding or cutting! It’s no fun but being able to breath! Read a labels and believe it when it tells you not to inhale vapors! You can research COPD and see how to protect your lungs! Be safe and good luck!

"Make some dust..." That describes most of my woodworking attempts.😅

Not sure of the need for the ribs after you've shaped the boat on a jig. A closed /capped gunnel would hold the top side shape? Good looking boat

You skipped a HUDGE HUDGE part right after you cut the plywood ! That joint is sooooo critical ! You just skipped right over it to where you were finished it and started gluing it. Now it's pointless to even watch the rest of the first video. I would have absolutely subbed and watched every one of these videos but I can't get my head around how stupid it was to skip such a critical part at the start of the construction.....

This boat can take on some very very rough seas; providing it has a good captain and good bilge pump.

Where did you get the glove box and tackle storage boxes? Everything I’m finding is ridiculously expensive

Nice, any plans for that sir? And what is the make and HP you installed?

That's an awesome boat , great job

Beautiful boat.

When you first fit the chine I noticed you didn’t put glue, and I thought I would have put glue. I wonder why he didn’t put glue, and I thought about it and realized that gluing the chine to the side would make it VERY stiff and would probably crack or put stress into the material when the side of the boat was bent to the frames. And then you mentioned that you had a notion about the difficulty with bending the work. To me it’s pretty obvious that you are correct, and I came to the same conclusion before you mentioned it in the video ! Really nice attention to detail , fine work. Being a Newfoundlander power dories are the pickup trucks of the water, I’ve often thought about having a nice large one for up here on the mainland. They are becoming more popular today here in Eastern Ontario. I would much rather have once of these than a fibreglass one. I use a large aluminum boat, with wood interior for convenience. I would much prefer one of your boats, if I didn’t have to trailer much. Beautiful boat.

Retirement project for me. Thank you.

Beautiful boat, that guy's singing is awful.

Looks like a classic Midland. Nicely done, sir. ⭐️⭐️⭐️⭐️⭐️

Ton vidéo né pas complet why

"I rolled it out" Do you mean coated it with epoxy?? Good idea though.

Does watching the printer, and watching him sweep sawdust, really help the viewer. Good content spoiled by boring content. Smh. I'll watch it all though.

Impressive

I learned a lot about what you can do and what you shouldn't do, what tools you need and so on. Great job.

Have you gone into what type of plywood u use? is marine grade essential or can exterior be used? How much is marine grade now? thanks

Is access ever needed under the floor? im strongly considering making a boat like this.

How about a nice piece of stainless running down the bow for impact and to tie the two sides together? ya or na

What happened to the boat? thats a good impact.

How do you feel the flat bottom rides compared to a v-hull ?

Is there a possibility of being able to make a flats boat out of this. Aka a flat deck on top of the funnels or would it be too tall out of the water

there is no way a clerk could build this😄

I wouldn't have thought that you could bend the sides with the chines pre-attached. How thick are the plywood sides?

Quint says “ Master Skiff Builder!”

This is the second boat I've seen where you are using the PVC decking. Have you been happy with how that material has worked ? I too have purchased your plans

Very nice build, sir. Love the lines of your boats. Thank you for sharing your builds with us.

Boa noite meu amigo, que legal admiro muito barco artesanal Deus abençoe seu trabalho❤

Love your videos, I could watch you build a boat all day.

Purchased my plans to build this boat at worldboatskiff.etsy.com

Why do the sides lean out so much or at all?

Hi! I would like to build a boat like this, to be more exact something like this. I'm interested about the thikness of the plywood. Can you please tell me? It would be a very big help. I checked the link in the description, but I don't really find it.

How long does it take for the slow hardener to cure ???