วีดีโอ

Most likely you’ll have to update the firmware. You can check the fw ver under the command menu.

@@vinnyhowells855,when I check that, what exactly am I looking for?

@@bigfootmountainvacation it says a number like 7.6 or 7.9 the newest one I believe is 8.3 it’s on their website. Along with directions.

Aren't you supposed to be able to add multiple cameras to one cell plan? If so, how come when I add a second camera, it ask me for cc information?

@@bigfootmountainvacation you can’t add multiple cell cameras per one cell plan. You can add remote cameras that link to your cell camera so that you are running multiple cameras per plan, but you can’t run more than one cell cam per plan.

Sorry for the late reply, it normally only takes a few minutes for cell plans to be activated.

J series cams are intended to be used as remotes to a cell camera or a home camera without service. It does not act as a cell camera so those options would not be displayed in your case. You’d have to buy a G/K series cell camera in order to transmit pictures to your phone.

@@vinnyhowells855my g series is having the same problem with the link menu do you know why?

Usually only takes a minute

If you still need help you can give me a call and I’ll help you the best I can!

There are ways that you can fold the curtains up or cut slits in them so you can see around you without a bunch of movement. We haven’t personally used the mesh net solution but you can get creative with your own blind to try and figure out what’s best for you. Do you leave your windows blacked out or use the Camo side of the curtains?

You need the 360 hunting blind I own both and I would never buy anything but a 360 no blind spots, tinted windows the deer can't see you, way better and quieter window system.

We don’t usually run a heater in our blinds with the insulation you stay fairly warm with your body heat. The windows do fog up though sometimes so you’ll need some paper towels or a microfiber cloth or something like that.

If you can get the extremes they are the way to go, but I use the regular blue ones and they seem to work fine!

The cell cameras don’t work without a cell plan it needs an active cell plan to take pictures. At least that’s what I’ve been told.

Man thank you soooo much for getting back to me, and so soon, subscriber forever!

I’m 5’9” the step through is pretty much the way to go in my opinion! If you’re interested in one let me know I could order you one.

They’re going to be having a Black Friday deal where they’re giving a lot of free accessories with bike purchase!

It’s under cell ID in the cell menu

You hit the up arrow when you get to cell ID and it will say busy and the numbers will pop up.

You don’t have to predrill for the screws but the shelf does need screwed in, yes.

We actually sell them and they’ve been running into a problem just like every other company with getting their materials in. The supply chain for shipping and everything else is really out of sorts right now.

Surveilance mode is set to FAP so when you set the cam to Surveillance mode then it will take them FAP!

In the Cell menu there is an option its called Cell Rate which sets the time that your cell cam will send the pictures to your phone. I set mine to send every hour because it keeps the queue from backing up and the pictures come in pretty consistently. As long as something walks by them in the hour, but if you didn't change the cell rate then the default is every 12 hours so that might be why you're not getting pictures.

Yes, you can set any camera you have as the home camera and it will still take pictures as well. It just won’t send the pictures to you, you’ll have to go pull the card from the home camera.

Are you looking at the pics that are sent to your phone or ones on the card? They only send you a thumbnail version over the phone but when you pull the card they are crystal clear.

Over the phone. What's the point in a cell plan and link. Etc. If I gotta still go pull cards to see what's walking by

@@coreylukes2390 I mean my cell pics are a little blurry but I can still see what they are. I don’t know maybe you need to change the settings on your LEDs so that you get a little bit brighter night pictures.

Yeah the cameras have to be armed and connected to the home camera for them to send. You have to go to the link menu and go to CL lvl to link them together.

Yes they do!

Yeah I’m sure the service is pretty sparse up there!

Are you using the K camera or G series? If its easier feel free to call the number at the end of the video. I'll try to help you out the best I can.

No you do not need the new firmware for the camera to send pictures but it wouldn’t hurt to try and upload the new one on there. I don’t know why it wouldn’t be sending you pictures if the test came through. Do you have a pretty good cell service where you put the camera out?

Well i dont know what the problem is, im fixing to go get it and see if i can figure something out, i knew it couldnt be that easy

I know at my house i have good enough signal and i tried it here 3 or 4 times before i took it to my lease and didnt work either, not really aure on the lease.I put it up on a high point, so it could get the best signal possible

My number is at the end of the video you can give me a call anytime and I can try to help walk you through it!

Thank you very much ill see what i can do after i update firmware and if i cant get nowhere ill prob be hollering at you, thank you so much

You can use the same card to update each camera!

No you add the phone numbers or email addresses you want the pictures sent to on their website. In that cell management portal. You can access your pictures from that, or right in your text messages on your phone.

Thanks for watching!

Michelle Nichols it should only take a minute or two to link make sure they are both have the same firmware downloaded because they won’t link unless they are running the same FW. You can check that in the commands menu pretty much all the way to the end it will say FW version followed by a number.

Epicenter Outdoors so both the cell camera and the remote camera my need an update? And if they have the same update will they link no problem? Because I did the update on the cell camera but didn’t do it on the remote one and it finally showed 99 good.

@@michellenichols5561 the remote cams might already have the update installed if that’s the case if it’s reading that you have a signal you should be good to go!

@Samuel Arndt so the problem most likely is that you might be trying to put the whole update folder on the card. You’re only supposed to put one single file from that folder on the card other than that I don’t know why it wouldn’t update possibly a camera issue maybe something with the card port. If you want to call tomorrow I can walk you through what you need to do with that file. Thanks- Vinny

Hey Stephen! It makes it nice for people that want to save several hundred dollars on a blind and/or just don't need particular options.... they make a Whitetail Property edition that actual includes all the options!

Matt Maurer you don’t add the Js to your portal they will be on there when they connect to your cell cam through the link menu! The K would be the only device added onto your device portal. I have a cuddelink video adding the j series cams too if you wanna check that out it’ll help you.

Yeah I would probably suggest taking the batteries out and letting it completely die make sure it’s not flashing with battery dead symbol and then when you put new ones in if you should be able to go to the test menu and find reset and hit that to reset your cam.

Lavishpuppy7512 Lavish when you go into link menu under commands the first option it says home remote or repeater just make sure it’s set to home and you’re good to go!