วีดีโอ

Would you mind sharing that user manual with us

If I didn’t found your video i'll be still doing timing settings with lots of cursing 😅 Thanks mate 🙌🏽 Subscribed

Can you please tell me what rims and wheels those are?

Thank you, very helpful to me

Good tutorial.. I have one of these in my shed which I must get round to sorting, probably one of the best mowers ever made..! Where did you get your parts from please?

No spark in my Suffolk colt lawnmower

Hello. I have the same lawnmower, but unfortunately I don't have a grass basket, how can I get one😢

I will try that boiling the carb, looks great afterwards

Get a hair cut and earn some Credibility

Bloody good video, very helpful

Hi I’ve just inherited one of these where do you get the parts from for the carb can’t find them anywhere.

The greatest danger of those spinning powertools is a bit of fabric on your body getting wound into the spinning bit, which quickly and violently pulls you in and does great damage. No gloves or sleeves or loose clothing near spinning powertools.

Good Job

Great series and super helpful info. Just tried this for myself using your method and it’s worked a treat. Thanks so much and keep them coming! 👍🏼

If you convert just one side for polishing while leaving the other side for grinding, is that likely to introduce severe imbalance and vibrations?

RANSOMES made a electric battery mower back in the 70s.

Hi, Mums bought a cd200 benley which isn't running well. Waiting for carb rebuild kit. Should the bowl drain screw be fully in? It seems to restrict the fuel in pipe.

Good morning. I need assistance please. I have a Dual Drive Suffolk Power Punch 17". I need to replace the clutch plates. On a manual I have found, the part number is L.5319, but my number is L.5318. I do not not know what to do now.

I have the same bike, and am looking to do the same thing. Genuinely this series has been delightful, Thank you so much for posting your process here! I know it's been a while, but where did you find the 3 fuse single relay block? Digikey, Amazon, and Mauser have all turned up empty. Any advice?

Great for kitchen knives?

Hi, my mum has got one of these which i would like to work on. Are all those tappets 0.05mm?

Is that an original black and decker workmate eye spy

Indeed it is quit addicting. I recently converted a grinder over to do a bit of polishing, like you have done and it wasnt long before I was hunting around the shop for things that "needed" polished. Bang up job my friend!

Hi thank you this was very helpful. What carb heater cable did you buy and where from? I understand it was from a quad bike. I was wondering what one. Thanks

Very helpful video! I'm looking to clean up some Chasseur Escoffier copper pots that I've had for years. Can you help me to choose the right compound and buffer? The short story is that I accidentally burnt one of the pots by putting on some water to boil a few eggs, then lay down on the sofa and fell asleep (of course!!)... Woke up the next day to find the pot still on the stove and completely black!! Thankfully the pot seems structurally OK-no warping! I've got a fair way in restoring it using Bar Keeper's Friend, a lot of elbow grease, and time. But there are still a lot of black fleck marks on it still and the copper has dulled a lot. I'm looking to purchase a bench polishing wheel to fix this one up.... and, of course, keep it to touch up the pots to a beautiful shine every year or two. If you have any suggestions on what combination of wheel and compound would most suit the job, I'd appreciate it if you could let me know!

Thanks For the Kind Words! Great job on the video breakdown, I love hearing Your perspective on this 🎉🎉

i’ve been once to London and Windsor, and my brother was driving , it was almost traumatizing driving on the wrong side of the road 😂😂😂

Nighthawk? No! Two-fifty!

Cd 185s and 200s weren"t marketed as fast bikes but went like stink. They were faster than the cd250u.

Put some light on 30 dark

Good film , just got one of these and am going through the belt change, very informative thanks

How many mpg do you get. Thanks

@toomanyprodjects I have a suffolk engine but the carby doesn't have a bowl on it do you know anywhere i can get one for that carby

Hi, Have you gotten any further on the CD200? I own one myself and I was hoping to see how you set the carb up.

the thing in the bottom of the carb that you dont know its an accelerator pump. when you open throttle, a part that act on the butterfly will also push a lever that push a membrane under a spring that will push extra fuel into the carb to enrish when you are accelerating... its just a clever trick to enrich when accelerating. :)

Be careful with the back and side cowlings. Mine is snapped near the back, and I've seen another with the same issue.

Yes, should have 2 throttle cables 👍. Great video, thanks for Sydney.

Hi - I hope you get inspiration to carry on :-D We live in a similar home with 'too many projects' going on all at once - i would admit its fair to say i am jack of all trades and master of none lol. We have a CD200 and 750 nighthawk interestingly 😅 My cd200 has been with us about 2 years and is an ongoing project - your videos have encouarged me to pick it back up from time to time when ive lost motivation - i think i watched the carb video 10 times before giving in and getting a cheap Chinese new one which worked straight away 😂. Thanks for the work and look forward to you picking this up again All the best

This is a brilliant explanation video. I had a problem with the blades continuously spinning at idle speed and your video was a real problem solver. One of the centrifugal clutch assemblies was sticking in the engaged mode, almost seized. Must say it took a bit of freeing off but I got there. Now it's better than ever. Wouldn't have known how to diagnose this without your video. Thank you.

I have my self - you said it was too loud. It looked like VPR wasn't turned on? I use the VPR button myself - it cuts off 50% of the output volume. And when that is turned on, it is quite easy to have and play with in your house. Thanks for the video. No im not so afraid to adjust bias and changing tubes myself.

This video and part one are epic,, I just bought a ‘97 from the local tow yard for my girlfriend as a first bike,, thank you so much for showing around the bike and typical faults! This is going to save me so much time (as long as the engine isn’t locked up I suppose)

did you measure the weight of pistons with the rings and piston pin

Im note sure you deserve that bike😑

Cheers for this. Got to clean the carb on an old Super Colt I just acquired and this'll be a great help. Don't really know my way around an engine but reckon I should be able to get it done.

My bike is this noise and the faul is valve open mixture second carburator

How much turn screw fuel mix ???? Original manual !!!!! And nivel floating fuel valve mm??????

Where did you find idle jet? Can you please copy the link?

I'm somehow reminded of cat weazel and the power of electrickery

Hi there where did you get the carb manifold gasket

Why does my cd200 leak oil from a hole in engine casing points side