วีดีโอ

Hello, you can put igntion with start button without pressing brake pad. Your engine start just by pushing start engine button only?

@@nocturneindustrieThanks for replying. I’ve already tried that but makes no difference car still starts probably due to the remote start wiring,

Hello, if i'm not wrong this module can work on your car, but the remote start/stop engine with key work only with automatic transmission.

Hello, i didn't remove because it was strongly keeped, i just lifted to pass the wire.

Hello, it's just a bridge. on the kit there is male and female obd2 connector, Plug and play. No problem to diagnose the car.

​@@nocturneindustrieThank you very much, my friend😊😊. I thought you wouldn't respond. Thank you very much for your information and for your time.😊

welcome ;) i have a problem with youtube studio, on app i don't see all the comments, i need to check on computer. i hope youtube will fix it =))

Hello, there isn't exhaust. there is only pipe. I think we can see it on video at 1:08. the pipe is cutted. ;)

Hello, yes you need to find the blue /gray wire if you have a VW Passat. you can use fast connector or different system for connect the positive line from LED controller. you can remove just little bit the wire protection and solder them for example.

Hello I think yes, without installing support. Just with back flip camera

Hello thank you. You can't because the pipe is not straight. This is why we need to cut it.

Hello, did you check all the wire from the back door ? Sometimes the color can change.

You can't connect to any wire at the back, you have to run one + wire from the front of the car to the back and then everything will light up as it should.

Hello no I let this part in the car to avoid the smell and gas. Bonjour non je n'ai pas supprimer le catalyseur afin d'éviter les odeurs et les gaz d'échappement.

Merci pour votre réponse c'est sympa

Hello, start button doesn't work and keyless open close? It work? And remote?

Hello, you mean your size is too short? Tell me dis you cut in two?

I took 90+20 because 110 was not available. I took 110cm another time for install it on another car and it's same just not cutted.

All what you need is on the set. Only tools is not included.

Hello sorry I didn't understand your question. Can you explain

Hello, the problem is only the front door ?

@@nocturneindustrie No problem is in the back door. In the front doors it is function.

Welcome 🙂

Hello, you mean sometimes the front door is flashing and or doesn't work totally?

Hello It is that when it is turned on they go well, but sometimes it does not turn on for bada and neither does the button.

Hello, yes I just unscrew little bit for win the place. You don't need to remove all the subframe.

Hello, no the mesh (catalyst) don't need to be deleted. Only the DPF. Better to let the catalyst for stop the gas, smell, ...

@@nocturneindustrieI see, so after cutting open the dpf, the bottom part which you break out in the video is the DPF material, but the mesh in the top part (near the turbo outlet flange) is the catalyst?

Yes part next to turbo you can let it. It is catalyst. 👍👍

Brilliant, thank you so much for the help! Great content, should have more subscribers

Thank you 👍👍 we hope soon.

Hello, what you mean exactly ? If I delete other side ? The catalyst system?

Apologies I did mean that yes. I was unsure if it was a dpf and cat. Got the car back together today. Your video was a fantastic help !! Hardest bit for me was actually getting it out !! Thanks for a very helpful video

Welcome. I delete only dpf. Cat is still working. And it is better to let on for low gas and smoke smell.

Hello, it depends if you install it yourself or no. Spare parts cost around 50€/60€. We are from France.

Hi, the main module is behind the multimedia radio.

Hello, reliability is okay for this moment, very seldom i have door side who is flashing but this is not a LED problem, it is my car ECU who detect an error. the dim in night is perfect, you can manage the power with APP and choose the power you need. At lowest brightness it is too much weak. i personaly choose 50% of power.

Hello you can find us on discord discord.gg/K5gCx8V6

Hello, l'adresse se situe en France ?

Hello, you mean that if you remove the reverse, the logo don't back to the "normal" position ? it stay open ?

Yes

you've probably tied them to the cable that powers the hazard red light when door is open

Hello, if you don't have blue/gray, you will have anoter color who must be the only gray cable. you can contact me on discord discord.gg/XaNeV7pP

Hello, for handle because i already have door handles light, i just take off the plastic from the new ambient light for keep only the LED and put between plastic handle and door panel, just next to the OEM door handles light. i didn't want to do hole or cut someting. and for connect you just need to connect on ambient light controller.

Hello, with this retrofit, unfortunately we can't manage the color from the OEM multimedia. Only with a smartphone app or with the button from the ambient light controller.

Hello, for Arteon take gray wire. 👍

Hello, after the installation, unfortunately no place for the spare wheel.

but why? fake sound is so gay💀💀

Hello, you can contact me on discord. discord.gg/GaraPpWE

Hello, muffler is missing. And the exhaust pipe is riveted on diffuser who is on bumper nothing more.

Hello yes you can send me the file. put it on google drive or other cloud and send me the link.

@@nocturneindustrie i have Kess but its look dangerous with Kess, i will order Ktag. Do you think its ok if i drive it without soft till i have the tools to copy the software? :)

Did you delete the DPF but did do the software? You can drive but you will have DTC and powerless. You have edc17cp14 before 2009 ? If yes you can do with kessv2 by OBD, with ktag more safe yes because you can save full backup but you need to open the ECU.

@@nocturneindustrie im waiting for the Ktag to copy to software and sebd it to you x.

Good 👌👌

Hello, Tell me with engine check light, do you have power loss ? On some model (seldom) you can have dpf off but still have DTC problem, it depend about the tuner who did the job, car model and ECu software. You need to delete this DTC, (not erase).

Where will the CANBUS be Audi A5 8T facelift on right hand drive?

@nocturneindustrie

Hello, if i understand good, you want to install the original active sound system with kufatec sound booster from Audi A7 4G to A5 8T facelift ? And you want to get the setting on your Audi A5 MMI 3G+ ?

On A5 8T canbus is on right side behind the glove compartment, And yes you can install OEM active sound on Audi A5 but you need also Audi drive select on your Audi A5.

@@nocturneindustrie yes. Correct. I have got the original OEM Eberspacher (active silence) muffler with speaker, the audi Khunke black sound module (4G model not 8T) and Kufatec blue module with button. I want to connect this to my right hand drive car but I am missing wiring loom as it was hard to get it off OEM wiring from the A6. Shall I try to take it off A6 or buy new look from Kufatec? Can I have your email to ask for help?

ciao, grazie mille, non so dirti se è possibile installare solo il pulsante. Non ci ho mai provato. Se vuoi il pulsante di avvio, faresti meglio a installare un altro modulo. E pagare tutto il sistema e mantenere quel pulsante non è un buon affare. devono esserci altri modi per installare solo il pulsante.

Thank you for your comment ✌️✌️ I appreciate it

Hello, no you can't

Hello, Yes you can connect to window switch but you need to take light signal cable (12V) on switch connector. Yes you can don't use dashboard light, and connect only main controller, it will work.

Okay thanks! What do you mean with the light signal cable on switch connecter? I dont understand that. And where do you advise to Connect the main controller on?

on switch window connector, example there 6 pin connector, you need to find on this connector the cable who will turn on the door button light when it's darkness/night. it is a 12V signal, you can connect your sub module(red cable) to this cable and negative cable on the door, like that when your headlight will turn on, the ambient light also will turn on. And for main module you can connect to dashboard light switch on left side.

You mean by dashboard light switch the switch to turn on the parking light/head light and all the interior button lights like the a/c and radio lights?

Or can I Connect it to the radio or something like that?

Hello, yes you can plug the OBD VCI and scan the car, no problem with that.

Hello did you find a solution ? speakers and positive signal for LED is not linked, there is no link togeter, maybe you forget to connect back the speaker. please check the wire.

Hello, symphony too much tuning))