Installation active sound Audi A5 8T 3.0 TDI CETE AUTOMOTIVE
ฝัง
- เผยแพร่เมื่อ 27 ก.ย. 2024
- On this video we install an active sound system from CETE AUTOMOTIVE on Audi A5 8T 3.0 tdi quattro.
Installation is very easy, you can see that we enlarge a hole for put sound generator this is not the best choice but the most fast and easy. You find other place to install it or if your car is different or if you have 2.0 tdi for exemple. Exhaust will not take all the place behind the car. It's jsut video for show main step. You must to adapt to your own car.
for more information check the link :
www.active-sou... - ยานยนต์และพาหนะ
Encore une sacrée vidéo et un boulot monstrueux!!
If you have a 3.0tdi v6 just straight pipe it. Much better sound.
Don't embarrass yourself with a sound module.
Active sound give something plus. And 3.0 TDI full pipe + valve ok. Without valve,a long way is difficult
Hi. I have the same car and planning to install one of these - in that position were you still able to fit the spare wheel in?
Hello, after the installation, unfortunately no place for the spare wheel.
good day 🙂 I want to get help from you I have something like that. But I'm having a hard time fitting it. Most cables can be connected, but I don't know where to connect the Can communication cable. Can you tell me?
Where should I connect p-can c-can b-can?
Hello, tell me what is your car brand and model ?
Thank you so much!!!
But which one is the can bas drive meaning which orange one if you could help plz
Hello, you are looking for CAN drive on which car ? Audi A5 ?
HI my active sound unit recently started sounding strange, it is no longer smooth. stepping on acceleration will cause a suddenly jump in sound. help
Hello, the active sound system is from factory or unofficial installation? Inside the muffler or outside?
Bonjour,
Un grand merci pour la vidéo,
Ou ce trouve le can bus et quel couleur pour raccorder pour une Audi a6 c7 qui n’a pas de sound système
Merci
Bonjour,
vous pouvez trouver le CANBUS drive au niveau de la passerelle CAN qui se trouve sous la banquette arrière si mes souvenirs sont bon. Les couleurs sont normalement identique: orange CAN H et orange marron CAN L, Avant toute intervention ou modification testez les cables.
Fantastic video 🤙🏻🤙🏻 is there access to the can bus in the load area of an Audi A6 Avant?
Hello, if i remember good. on Audi A6 avant the can gateway module will be under the rear seat, you will find there Drive Train Canbus.
hello may i ask one thing ? This upgrade will void my new car warranty ?
Hello, i dont know, if you do installation by your brand car dealer maybe you can still have warranty. There is only 4 wires. AND if you have place under the car for sound Generator, you don't need to cut something. Better to ask your dealer.
Hello, thanks for the video. Does the brand of this product belong to France?
Hello, it is German brand. And of course, ship to France.
Subscribed! 🎉
I don’t know if my question got posted before.
I have gotten the parts from an Audi A6 C7 (4G) 2013 that came with speaker exhaust, Kuhnke ECU (part 4G0 907 160 B) and Kufatec gateway (part 42832) and wiring loom (to connect ECU and gateway). I am missing the cable which connect to my CANBUS (I am trying to strip it from the A6 otherwise buy new from Kufatec)
Do you think it’s possible for me to install to Audi A5 2012 8T facelift with MMI 3G+. Is can is the same?
Where will the CANBUS be Audi A5 8T facelift on right hand drive?
@nocturneindustrie
Hello, if i understand good, you want to install the original active sound system with kufatec sound booster from Audi A7 4G to A5 8T facelift ? And you want to get the setting on your Audi A5 MMI 3G+ ?
On A5 8T canbus is on right side behind the glove compartment, And yes you can install OEM active sound on Audi A5 but you need also Audi drive select on your Audi A5.
@@nocturneindustrie yes. Correct. I have got the original OEM
Eberspacher (active silence) muffler with speaker, the audi Khunke black sound module (4G model not 8T) and Kufatec blue module with button. I want to connect this to my right hand drive car but I am missing wiring loom as it was hard to get it off OEM wiring from the A6. Shall I try to take it off A6 or buy new look from Kufatec? Can I have your email to ask for help?
Is it same for audi a6 c7 3.0tdi? (No active sound exhaust from the factory )
Hello, Audi A6 c7 is more long than a5 8t maybe you can find place for put it under the car. For Audi A6 c7 the trunk don't have hole to enlarge as what I remember. For my opinion better to find place under the car for A6 c7.
@@nocturneindustrie to thanks your answer. Yes, place will under car but electric instalation will tu same?
almost same, you can find fuse box for power in trunk or on each side of the dashboard. and about canbus wire, you can find it on the gateway, if i'm not wrong the modul is under the rear seat.
For Audi A5 same car as yours, right hand drive where is the canbus? I have the everything from Audi A6 C7 (4G) but missing cable to take to canbus. Which cable should I buy to install everything to the car?
Hi ich möchte bei meinem Audi A5 2007 active sound nachrüsten also erstmal das originale system dann den active sound adapter.
Ich habe ein Kit mit allen Steuergeräten und Kabeln.
Aber bei dem Gateway weiß ich micht was ich machen soll, da es ja ein Original Kabel bis dorthin ist
Hallo, sind die Controller original? Welche Farbe haben die Controller-Kabel? Wie viele Kabel hast du?
Hallo Ja sind original von Audi A5 2015
Ich will in Audi A5 2007 reinmachen.
Ich weiß leider nicht welche Kabel ich an Can Gateway ich verbinden muss.
@@nocturneindustrie danke für die schnelle antwort
Hast du die drive select an deinem Auto? Trägt Ihr Controller diese Referenz 8t0071953a ?
@@nocturneindustrie hallo nein kein drive select und ja genau diese nummer hat mein controller.
Aber ich habe ein modul mit zwischenstecker „active sound gateway ble“ ähnlich wie im video.
Aber ich bin so überfordert und weiß nicht welche Kabel ich vorne beim Beifahrer ich verbinden muss und mit welchem Zwischenstecker.
Nochmal Danke vielmals für deine Hilfe sehr sehr nett von dir!!
Ja das eigentlich verboten oder mit Anmeldung möglich
in Frankreich wird niemand dieses System kontrollieren. Jeder muss vernünftig sein, um die Menschen nicht zu stören. egal zu welcher Tages- oder Nachtzeit.
Ey Bro this Soundmodul is Vibration
the antilag simulations always sound cringe, because there's no high frequencies coming out, so you can easily tell it's a fake ass pop. I prefer not having antilag or pops on it, because then it sounds more realistic.
If you want clearly fake sounds, just put a boombox in your trunk and have it play sounds. Cheaper than a sound booster.
Hello, yes pop is not realistic with active sound. i prefer classic active sound or better just a v8 engine ;)
@@nocturneindustrie Hey I am back after a year. The brand Thor just released a treble speaker for their systems. making it sound pretty real. Heard a demo of it with an E60 stock exhaust and a 5-series non-m diesel and they sounded pretty equal. Except the M5 obviously still had way more engine noise and no diesel rattle.
Envrai incroyable je suis proptio d'une Audi A1 1.6 TDi et j'aimerai trop me procuré ça, le blème le prix. . .
C'est vrai que le prix est salé, surtout que c'est une option "plaisir". Mais le résultat est 😍😍 et désactivable aussi pour rouler avec du silence lors des long trajets.
@@nocturneindustrie Je suis d'accord a fond hihi, là je vais devoir coffrer mdr
ρгό𝔪σŞｍ
@nocturneindustrie, hi my comment gets deleted everytime. May I ask about the connection you helped me in a comment below I have the original gateway. Want just to know how to connect the cables so you send me the plan what cable to what cable, but I dont know wich cable connecter to use…
Sorry ich kann mich nicht genau ausdrücken. Welche Art von Schnellverbinder muss ich nehmen? Sind das diese „T“ Stücke? Weil ich muss ja das kabel nur zwischenstecken oder?
hallo, ja Schnellverbinder " T " oder besser parallel
Schauen Sie sich die Links an
www.conrad.com/p/mta-kfz-schnellverbinder-pins1-2233962
www.my-knx-shop.net/installationsmaterial/leitungszubehoer/isolierte-kabelschuhe-und-verbinder/schnellverbinder/46947/schnellverbinder-0-5-1-5-rot
0.5-1.5mm2
Vergessen Sie nicht, zu prüfen, für welche Kabelstärke der Schnellverbinder vorgesehen ist.
@@nocturneindustrie thank you very much boss!
@@nocturneindustrie can you check my question please?
good day, I have one question, I have an audi a5 2.7 tdi sportback 2010, where to install maxhaust active sound hitno
Hello, you don't have many choice. You can do as we did in video or you can modificate/remove a part of your exhaust and install the maxhaust instead of 1 muffler for example.
hello, I have a question about whether this maxhaust fits the audi a5 2010 2.7 tdi ece e24031446
audi a5 sportback 2010 2.7 moći montiranje u gepek ako stavim rezervni kotač nemoze biti ili kako drugo ili ispust auto da je to legalno pitam ako stavi ispust auta na tehnički pregled bude sto ili ne
Hello, if you install inside the car as we did. You will not have the possibility to put the wheel. We tried to find solution but nothing was success. And for periodic technical control, we don't have problem in France, you must to check in you country. Because it can change the characteristic of the car (decibel). If you install next to muffler as an adaptation. You can turn off the active sound during the control. For me the best is to install outside under the car. Remove 1 muffler and put a tube and solder just next active sound. Another point is be careful about the water because we don't have enough perspective if this type of module can live long time. We know the problem of sq5 with weak speaker, and this speaker is inside the muffler. ;)
Combien coute le système complet ?
Et vous êtes situé ou?
Bonjour, le système complet coute environ 1300 euros. Nous sommes de la région parisienne.