วีดีโอ

Hello, thank you for watching and subscribing, very much appreciated. The choke seemed to be the right length, but it appeared it was just slightly too short. I guess then some people would say it was my fault for not using hyper accurate measuring equipment.

@nickvending9688 You live and learn mate 👍

Hello, I remember World Wide Arms. Yes, you need to be a member of a reenactment group. I recommend the Military Vehicle Trust.

@@nickvending9688 thank you

Sorry for the delay. I'll try to remember to measure the probe tomorrow.

I'm very sorry for the delay in replying. Mine measures 6.95mm diameter

Hello, my apologies for the delay in replying. They are quite good for historical reenactment. The problem is they are quite delicate and you can't get spare parts for them. But they are much less expensive that deactivated rifles and at least you can cock them and pull the trigger.

I'm ever so sorry, I can't remember the length. The gun is no longer with me so I can't take any measurements.

Hello, yes they can be disassembled. I wouldn't recommend it though, they feel a bit loose after being reassembled.

Hello, thank you for watching and thank you for your comment much appreciated. They really are great rifles.

Hello, thank you and I take your points on board. Sadly the rifle carried on leaking, every seal was perished. I replaced them all but still a slow leak from somewhere. I don't have much time anymore to work on airguns or indeed use them so this rifle was sold along with some of the other characters from the channel. Great choice with the HFT 500, that is a rifle I'd rather like to own one day

Nice one 👍🏻. Which scope is it?

@ vx freedom 2x7x33

Pin accurate with jsb .22 H&N .22

Very nice 👌🏻

My old one liked Crosman Premiers, but the H&Ns weren't far behind

Thank you, much appreciated 👍🏻

True, what the dog is doing is far more complex.

Hey, they are MacWet gloves specifically designed for shooting. If you'd rather get your hands cold then that's up to you. 🤔😘

Thank you

I hope you don't mind me replying in English, I was not sure that the google translation was good enough. I will do a video showing various methods of attaching a scope to the Enfield No4 action.

شكرا جزيلا تحياتي وتقديري​@@nickvending9688

Yes, would it have broken the bank for them to have done that at the factory?

www.fusil-calais.com/en/3436-gsg-stg44-blank-firing-assault-rifle-9mm-pak-bore.html

Hopefully the link in my other comment has come through OK. GSG make one. Alternatively if you have a firearms licence look for a Withum MP44. They come with magazines specifically for blank .22 RF cartridges as well as proper "live" .22RF. Just remember which magazines are which...

The rifle improved no end, but I did wonder if something else was not quite there. I sold the rifle so now I haven't got the opportunity for further tinkering.

@nickvending9688. Hello. my recomendation for all Gamo rifles with RRR.

It wasn't exactly the best design to copy. I guess they did it because it was cheap to make.

Well personally I agree with you.

Btw, Japan is high quality country, that's where your ps5 is from, your favorite Dark souls, your good solid car Toyota or Nissan.

Hello, thank you for your comment. My apologies to have offended you. I would like to point out that it is a first impressions video, my first impression upon opening the instructions that they weren't in English but thankfully the English was on the other side. OK, presumably I should have done an Oxford degree in far eastern languages to then know exactly what language it was before then doing my first impressions video, but then it wouldn't exactly be first impressions. I assume you have an issue with the Chinese, hence your comment and your follow-up comment? I don't hold any prejudice against Chinese products, some are great, some are terrible, much like products made anywhere else. But hey, almost everything is made in China. The scope in the video is pretty lousy, if it was made in Japan then frankly I'm disappointed.

I don't have a PS5, I'm too busy working to play games. Dark Souls - no idea what that is. I drive a Suzuki, my wife has a Subaru.

@@nickvending9688 if the scope quality is like you say, then Japanese people did horrible job, but at the same time there are people who say this scope is great, firm and clear. I just wonder if you can take it to airsoft and run in woods, crawling, going to prone, squatting etc. About China, I don't care, I don't like China but love Japan, after doing like 5% of research I found Japanese sounds cool like any EU language, that they are white like us, their eyes are more open for Asian (big eyes, unlike most Asians Small). So clearly Japan is not on the same level as China or Korea,Taiwan etc.

@@nickvending9688 so you Are using Japanese cars.. even two of them

Thank you for your comment, much appreciated. They really are great. I ended up holding on to mine, I couldn't let it go. I get the impression it will outlast me, plus it looks great. All the best, Nick

Spot on

Hello, it is 4.5mm (.177).

Thank you, I'm glad it was helpful.

Spot on

@nickvending9688 🙂🙂🙂

Which part of Swindon looks like this? I've only been to Cosmos and the magic roundabout.

Similar

Similar

Glad the video was helpful. I found that the smell faded with time.

She hasn't chased a rabbit yet. Mainly because we haven't really got any round here. Squirrels are her favourite.

Would be great if we could ask them. Same as asking her why she decided to trash the porch...

It makes her day when the mailman turns up. Barking away.

It's a nice one for sure. I used Napier oil and a soft brass brush. Then left the oil on to work its magic, wiped off and applied legia spray. All good now 🤞🏻

You should have taken it to Vending Auto Services. Our MOT tester had a white stick and a golden retriever.

Hola antonio Espero que te encuentres bien. Es un rifle No4 Mk1* fabricado en Canadá. Lo compré a bajo precio sabiendo que necesitaba un poco de limpieza. Debe ser un rifle preciso, tiene el mejor tipo de cañón. Mis mejores deseos

The Denix Garand was a disappointment for me, I looked at it and then bought an MP44 instead. The Sten is pretty good, I do like mine. I've done a lot of work to my SMLE and K98 to improve realism, spoiler alert-the K98 may have gone through rather drastic surgery but is all the better for it. That red woodstain that Denix uses is truly awful, why they can't use a brown stain (that ideally doesn't stink) is beyond me.

I agree with you completely, the QC is a bit too loose, some bad ones keep slipping by the net. I think the cutout in the stock is for shooting sat with the rifle rested (which is a bad idea with a springer). The left arm of a right handed shooter would go under the butt, the cutout rests on the arm. That's how I shoot PCPs, rimfire, centre-fire, some of them have a similar feature in the butt. Alternatively it might just be so it looks funky...

Thank you, very much appreciated.

Thank you for watching 🇬🇧

They are both really good, likewise I love mine too. For me the Compact edges it for the ergonomics, making it easier for me to shoot. But back when I was a kid I was very accurate with the 45, but then it was all I had so I used it almost nonstop.

@ these are the nicest pistols I have ever had and shot. The gas cilinder is strong and every time the same power. Last week i bought the Gamo HPA MI Maxxim IGT Mach1 With the same power cilinder.

I wish I had bought the MPA, they seem to be very good rifles. All the best, Nick

Thank you, yes I removed those videos as soon as it happened.

Hello, thank you I've just had a look. Their proces.on Denix are higher than Soldier of Fortune for the items.I compared. However they do have some unique items-I'm tempted by the battlefield relic Webley for sure.

Gracias Antonio, sí, es horrible. Me alegro de que nadie haya resultado herido. Espero que te encuentres bien.

Yep. I'm gutted.

Barely even 100 shots. Absolutely gutted.

Hello thank you for your comment much appreciated. Yes, that's the design. However the casting is not clean on the mating surfaces so they don't align properly, plus the mount clashes with the front pad. Will be relatively easy to rectify, but a bit irritating.

Thank you, much appreciated 👍🏻 Most people were blaming my shooting, which was nice of them 😉.