วีดีโอ

I run a CS-590 and cut 4-5 cords of firewood a season. I noticed your Echo was running a little rich and losing RPM as a result. Either your filter is dirty or you will want to lean out the high speed needle just a bit.

i use it in alberta canada, yes you use more and itseems like a bit more ash but if i had to pay for it its 1\3 the cost of spruce and 1\5 the cost of birch.

I did this several years ago but I called Champion Customer Service and they sent me a replacement hose and threaded connections at no charge. They probably figured before they get sued, they should fix this issue aka recall.

Should never use hose clamps on a hydraulic circuit. Get manufactured and crimped hoses.

Welocome to the world of hydraulics. These things happen on all sorts of hydraulic equipment.

I also use a frontier ( sv long cab 4x4 with the 4.0L.) Bed is 6ft long x 5ft wide x 1.5 ft deep. For a total of 45 cubic feet. Minus the wheel wells is pretty much 43 cubic feet bang on for a face cord.

What a waste. You cant find all the dead ash for camp wood

selling bark for medicine

How did you set your spitter up to automatically extend?

Dogs are not for kick backs! They are for leverage as they act as a fulcrum

U like the Pittsburgh moisture meter?

RIP.

Not long enough to do any good. Looks like a complete waste of time and money.

That 590 is running too rich. That's holding it back. I have both saws and the 590 stomps the 455.

Too many variables.

Very helpful video. I just purchased this same pole saw. I've only used it once, but am pleased with it so far. :) The title of this video is EXACTLY what I thought after using it. I should have bought this years ago.

How many hps is that pump

How hard was it to remove the lawnmower deck on your tractor?

We use it a lot in TN. Splits easy, dries quick, lights quick, grows like a weed, it's rare when it gets cold enough here to need to burn big oak/hickory logs.

I have the 7 ton and it leaks through the bleeder screw. Is this normal and how do you fix it?

My brother would sell flowers for some dude. I bet the dude got them from a U-Pick. I never thought about that till now. Brother was 14 yo at the time. He got robbed a bunch of times. Dunno why he didn't quit after the first time. Each time he got robbed, he would get robbed again by the guy he was selling flowers for. The guy demanded he pay for the money that got stolen. I bet the guy was responsible, in some way that I don't yet understand, for my brother getting robbed.

A lot people say wood doesn't season in log form but what I found is if your logs are in a sunny spot and are around 12-16 inches diameter out there for a year or 2, its not as wet as people think. I split them recently in June through July and all are registering in the teens now. Only the oak is not ready, on average around 25-28%.

Have you ever cut firewood before? Oh, you’re one of those guys that just like to continually rev the saw.

On my farm ive ran husqvarna up until a week ago. They are plastic junk! The handle broke..... plastic. The the safety stop broke.... plastic. Instead of trying to find ebay replacement parts i put that under powered 455 in the scrap pile where it belongs. Picking up an old rebuilt mcculloch tonight.

I had a few poplar trees blow down last fall and I decided to utilize it as fire wood mixed in with my usual maple. I guess I'll see how it turns out. I do keep my wood much larger than what I see on your video. That looks quite small even for stove wood, no wonder it seems to burn fast. I guess that's what your customers are looking for.

OK ITS FIREWOOD SEASON. FALL 2024 (SEPTEMBER) HERES THE DEAL. DO NOT RUSH THE PROCESS. ANYONE TELLING YOU TO DRY IN 4 MONTHS HAS NO IDEA WHATS GOING ON. IF YOUR WOOD IS FOR AMBIENCE, LISTEN TO THIS DUDE. IF ITS FOR HEAT, LET THE WOOD DRY FOR 2 YEAS FROM THE TIME ITS CUT DOWN. HIS WAY IS LIKE SQUEEZING A CHICKEN TO GET THE EGG FASTER. HIT TWO DRY PIECES TOGETHER, THEY MUST SOUND LIKE BOWLING PINS HITTING TOGETHER. THEN ITS TIME 2 BURN.

Where’d you get the moisture meter ?

I have two inch trash water pump and one rain gun and a 2.5 acre food plot and 200 meters of flexible PVC hose people am using to irrigate. How best can I split it using a connect to use a second rain gun to increase the irrigation radius.

Martin Ruth Gonzalez Joseph Jackson Sandra

Please i need your contact and how much is this sprinkler? I really need it

Im so glad i have my 272xp and 372xp because these saws are just to underpowered. Once you have power it's hard to go back.

Only way to get a 455 to perform is to convert it to lo pro 16" go up a tooth on the sprocket.. run full chisel or skip tooth

Closer picture please

I just bought the same splitter from HD. Brought it home and went thru the manual to ensure I started it up correctly. After a few minutes of running I had hydraulic oil spewing out of the refill plug. I called champion customer service and they said the people that assembled it at HD must’ve put too much oil in it. There was maybe a cup and a half of oil that came out. Oil level on the eye glass was a little over half so I figured it made sense. After a few minutes I look at the level after it cooled down for about 15 minutes and it looked low. I added some oil and it ran fine. After splitting wood for about 45 minutes it makes a whistling noise when the blade returns. Only when it returns. Not sure what going on. I figure I will drain all the oil out and replace with fresh oil and filter to correct levels according to manual.

Ash borers are taking out our oaks and ash here in a real big way.... Took down a couple 30 inchers this spring.

Just because the logs are dry doesn't mean it's seasoned.

Dude, you shouldn't be comparing saws if you don't know what you're doing. To be fair, you should have a brand new chain of the same type on each saw. The difference you're seeing in the amount and distance of chips being being thrown is due to differences between the chains (wear and sharpness & height of the rakers). I love my CS-590 and think it's a great deal for $400, but I can';t tell ya anything about the Husky, 'cause I've never had one (I almost did buy a Rancher..but opted for the Echo instead, mainly due to it being a much better value).

Use PEX fittings on the hoses....................

Why not use a water reel?

Do you dry the wood first or sell a freshly cut one?

replace the trash pump's pump head . or i wonder if you can just replace the impeller? it is kind of hard just finding just pump heads though..

you don't have a foot valve?? get one, so the water does not drain out of the suction hose.

When my dad sold a truck load of wood in the early 80s he sold it for $20 a truck load, now that i seen how much i can get i need to cut up the oak behind my house

need a water reel

The chain you showed pictured was not a low kickback chain, it did not have the extra long guide bar in between the links of cutter teeth

Right now I am looking at the Cub Cadet ZTS 2 60" with the steering wheel, my main concern are the spindles being made to cheap, I know with the steering wheel it will hold slopes and hills. Thanks for your review.

Maybe in the Sahara Desert.

I mix poplar with my hardwoods here in west Virginia

Did you ever test the soil again to see uf the buckwheat did improve it?

I had some clamp on forks that kept coming off.