วีดีโอ

I know this is an old video, however I wanted to do a follow up on the fix for these magazines. The information was spot on. I did the modification as recommended. The magazine is now functioning perfectly with very light filing to the tabs that are on the upper sides and near the rear portion of the magazine just in front of the rails. No mod was made to the rails. The magazine no longer binds when I remove or insert the magazine into the rifle. Very little material was removed through incremental filing until it slipped in and out freely. Hope this helps anyone coming in years later. It's now October of 30th 2024 as of this post.

So glad I found this video.! Have the same magazine issues you had. Had to fight to insert and remove the magazine. Magazine is worthless in its current configuration, so it is time to modify it. Thanks again. New subscriber 😊

I sent my model 93 GV back to the factory because it wouldn’t chamber a round and the mag wouldn’t come out very easy. Got it back yesterday after 9 weeks. They polished the chamber and sent two new mags with it. One 5 round and one 10 round mag. Just shot it this morning and it cycles perfectly and when I push the tab to release the mag it pops out 1/8” of an inch for easy removal. I am very pleased with the rifle now!!!!!!

Where did you get the main spring from? Great Video

A concise, no BS video. Thank you sir.

I just sent my 93 GV .22 mag back in to the factory. It won’t chamber a round. I had a master gunsmith try to fix it to no avail. If it can’t be fixed I want a refund!

T10 torx, thank you very much!

Thank you so much for this video. I just changed out the mainspring on my 2005 German P226. Lots of videos out there, yours was simple and worked like a charm. Bravo!

I plan to get a small pocket size rated for 300lbs, and a larger spool for 550.

Do i need Thiner or Thicker line to cut wood branches?

I as almost purchased this on ebay. I went with a Ulticlip and am satisfied so far. Thank you for the upload.

pikal knife, very good in real self-defense

Bend in locating tabs as well as the top lips to center the feed and rhe rifle will work great! Don't modify the trigger alignment tang! I've done this on many mags and always works.

Nice looking gun. I agree 100%. Mine works fine with 4 rounds in it. Great video thank you kindly 😢

I’d like to see how it does cutting wood. I’d also like to see how different thicknesses of Kevlar cord cut. I have some 100# and some 550#, but would like to know what’s best for cutting through wood.

0.036 wtf who uses that as a real world measurement. That's as dumb as my father who, one day put up an order with measurements in thousandths, knowing our tape measure was millimetres and fractions of an inch. But what annoyed me was, I knew that the customer didn't didn't ask for it that way... Stupid way to run a a business, that is asking for a mistake.

I wanted to see if it's difficult to cut the kevlar. Everybody is saying to use it for prepping and it's like? what if it's a huge pain in the ass to cut to length?

Copper pipe

I had the same with the 22 magnum 93 model and the same fix mine in btvss 93 great review

Absolute dog shit product. Doesn’t matter how accurate they are the mag issues are driving me nuts

Get an old door knob and see if you can cut a handle off as if you were locked in a room.

These 17s and 22mag savages are pieces of shit. I own both. You shouldnt have to put up with this crap on a new gun. Savage denies issues when I call yet there are literally 100s of complaints about the mags. I dont need to be a damn gunsmith after spending money on a gun. My Marlins dont give me any crap in these calibers.

I wish you'd as planned made more episodes of this series.

I bought a model 93 bull barrel. This mag makes this gun the biggest piece of shit ever made i will not ever get another savage can't wait to get rid of it.

Dollar store cutting board..2 dollar project

Awesome video, just what I needed

That was the best hammer spring change out video I've ever seen. Keep it simple!

I actually did the exact same thing as this vid except for a self defense tool. I sharpened it in the shape of a punch knife so now I have a non metallic tool. Not super sharp but it’s good for puncturing things. That’s a good idea to make training knives like this

Holy shit whats in your throat?

instead of saying "yeah you can use a hacksaw blade but you don't need a hacksaw, just the blade, but im gonna use a jig saw..." he actually used the hacksaw blade. legend

I don't know why a 10/22 is so picky about the ammo. I always judged the ammo by the brass, the shinyer the better but that's wrong. My stainless steel Was-mart liked the dirty old Remington Thunderbolts and the Federal Classics

really bad job on the stock

Out of curiosity what did you drill the hole with?

Thanks! Going to try it for a CRKT Scrub, hope it works, and if not, can try it on my cheapo Oerlas! Well done!

That is sweet! I didn't know Spyderco made these. Good upload!

Nice video 👍🏽

Looks very similar to the magazines for my Marlin XT22M

I know this is an old video but I enjoyed it just the same. I recently received an 0350 from a buddy and thought about doing the same thing to the blade

I was hoping to see it go against some more substantial materials.

I bought one off my buddy he got from tops,he really don't use or need it,brand new 1095 carbon steel an micarta handle, super sharp.

Moron

Thank-you, Sir.

These guns are junk!!

I'm definitely doing this

Thanks for the video this was pretty smart because the cutting board is pretty strong and it will last a long time.

Hello.This inside clip?

Can it cut another piece of Kevlar cord?

What would you need to use to cut the Kevlar cord?

I don't think it's Kydex. I think it must be injection molded plastic, which is good. The belt clip on the Cold Steel Kobun sheath is garbage, I think this is what I need.

Do you think this could be bolted on to a cordura sheath? I am trying to carry it Iwb. Tia.