cheny
cheny
  • 88
  • 133 376
Hiney Ladybird - Gateron Black Inks on Aluminum Plate Typing Sounds
Super underrated board! Little to no hype behind this board or Hiney boards in general (maybe besides the HBCP) even though they're really solid.
Originally ran mx blacks on this but I wasn't too huge on how they sounded. The Ladybird has a deeper sounding top mount with the alu plate so I felt like inks complemented that, and they did to my ears. Super full sounding spacebar with an ink in there! There is a touch of resonance/hollowness, but that could probably be fixed with the force break mod which I didn't do and am not too huge on doing with seamed boards because the gap is really easy to see. This was also my first time trying a CEM3 pcb and I don't think I'd be able to hear a difference in sound from FR4 unless I had the two side to side.
Very comfortable typing experience too for top mount which is usually a bit stiff for me but this is comfy. Spacebar isn't too stiff either and all the mounting points seem well distributed to me. Maybe this softer and comfy typing experience despite the alu plate is helped a lot by the CEM3 pcb but again I can't tell unless I had the two next to each other.
Visually, the board has a super sleek design with its nice mixture of curve on the back end and some sharp angles, nice subtle cherry lip at the front too that I'm always a sucker for. Interesting weight design too with the interior of the case looking like brass, but on the exterior it looks like SS. Biggest gripe with the board is the 6 bumpon feet at the bottom instead of the traditional 4 especially on a 60%. My guess is that to still isolate the board from the desk, 6 smaller bumpons keep the front height lower vs 4 bigger ones on each corner? I'm probably wrong but that's just my guess. Other than that, really no complaints, its just a really nice board. Beautiful colour and smooth anodization too, perfect match for shoko!
I got one more build to showcase for this board another time too. Thanks for 400 subs!
Hineybush Ladybird
CEM3 H60 Soldered
Aluminum Full Plate
Gateron Black Ink v2s
Lubed w/ 205g0
Filmed w/ Deskeys
TX 65g Long Springs w/ GPL 105
Modded Cherry Clips ins
GMK Shoko
Audio Setup:
Lewitt LCT 440 Pure XLR in Shock Mount (Positioned Head Level Above Keyboard)
Focusrite Scarlett Solo Audio Interface (Gain Dial at 3 O'clock)
+14 Gain Added in Audacity
Rode PSA1 Boom Arm Mounted to Desktop
มุมมอง: 198

วีดีโอ

CM Storm Quickfire TK - Cherry Mx Browns on Stainless Steel Half Plate
มุมมอง 684วันที่ผ่านมา
We've finally come full circle with this board. A bit different than any of my other builds recently but this was my first mechanical keyboard that I got back in 2016 that I've kept up until now. One of the weirder gamer board layouts with its non-standard bottom row and numpad where the usual TKL navigation cluster would be. Kinda like the weirdness of the layout, its the only board with a num...
Sho S60v2 - HHKB Pro 2 on Copper Plate Typing Sounds
มุมมอง 81314 วันที่ผ่านมา
LFGGGGGG first topre vid on the channel! Big thanks to the homie Kenny for letting me use this sick board. Using Topre for the past few weeks has been really fun and has honestly been a huge refresher from MX. From the feel and sound alone, its a totally different experience from anything MX related that I've used. Feel wise, The tacility took a bit of getting used to after the only tactile swi...
Velvet Pro - Gateron Black Inks on UHMWPE Plate Typing Sounds
มุมมอง 576หลายเดือนก่อน
MORE VP CONTENT LFGGGGGG! Inks on bumpwipe go hard! I've had my VP built in this config for months but just never got around to recording it for some reason. Although the mods lose a lot of their volume and denseness in sound, I just really love how comfortable this is to type on and has been the main reason I haven't rebuilt since. Not to say that this config sounds bad either, its a pretty di...
Kibou Fukuro - Cherry Mx Browns on PC Plate Typing Sounds
มุมมอง 1Kหลายเดือนก่อน
This is the one. Out of all the builds I've ran on the Fukuro so far this one is my favorite. Sounds and feels awesome to type on, I can't get enough of browns on a plastic plate in top mount! Got some more plates cut for the board and the spacebar is no longer plateless like with the stock plate which I much prefer. If I was to solder in a build for this board, it would 100% be this one. I usu...
Mr. Suit - Gateron Cream Sodas on Pom Half Plate Typing Sounds
มุมมอง 387หลายเดือนก่อน
Sorry again to the foam/mod haters, but I just had to bust this one out LOL I still do in fact own this board and could never get myself to sell it since it was my first raffle win ever for the tiramisu edition. Honestly, I still do enjoy this board and still use it every now and then to change things up. Its definitely a crowd favorite among friends and family who come over and try out my boar...
Key65 - Cherry MX2A Browns on Aluminum Plate Typing Sounds
มุมมอง 848หลายเดือนก่อน
Happy late by a day Halloween! Saw a listing for this board on the market for dirt cheap and realized this it could be a fun to mod and mess around with. I can't believe some versions of this board were going for upwards of $900 on the aftermarket during 2020-2021 just goes to show how crazy the market for customs used to be. This board was quite the fixer upper, it didn't even come with gasket...
Matrix 2.0 Add - Cherry Mx Blacks on Aluminum Plate Typing Sounds
มุมมอง 1.7K2 หลายเดือนก่อน
Finally got a 2.0 Add! Board absolutely does not disappoint and I'm stoked to own one at least. The 2.0 Add has one of the comfiest top mount typing experiences I've tried so far likely due to the 1.2mm PCB. The comfy typing experience probably comes at a cost of the alphas being ever so slightly thin for my liking, but definitely not a deal breaker. The thinness could also be from the switches...
Velvet Pro - Gateron Black Inks on Aluminum Plate Typing Sounds
มุมมอง 8933 หลายเดือนก่อน
If you are interested in the Velvet Pro or any of Andy's other projects, please join his Discord server: discord.gg/YKC8268QFE This was the meta config for the og gonedat Vulcan Pro so I had to give it try myself. I don't think it sounds that close to some of the original VP with inks on alu sound tests, but I still quite enjoy this config. The spacebar with an ink sounds so good compared to an...
Velvet Pro - Cherry Mx Blacks on Aluminum Plate Typing Sounds
มุมมอง 1.9K4 หลายเดือนก่อน
Quick TL;DR before I go a bit more in depth, this board is fucking gas Mr. @ampersandyco absolutely cooked. If you are interested in the Velvet Pro or any of Andy's other projects, please join his Discord server: discord.gg/YKC8268QFE This is one of the first times I've ever really gotten in on a smaller run or r0 of a board and man am I happy it was for the VP. I think everybody already knows ...
Kibou Fukuro - Cherry Mx Blacks on PP Plate Typing Sounds
มุมมอง 7654 หลายเดือนก่อน
*Edit: In hindsight, this config sounds worse than I thought in the recording so even more scuff lol My bad this vids more scuffed than usual. Too much lighting and camera really wanted to pick up literally every mark on the deskmat lol. Another config on the Fukuro! Still loving this board and having fun trying out different configs with the millmaxed PCB. PP doesn't miss and it sounds great h...
Merisi Sessantacinque - Cherry MX2A Browns on Carbon Fiber Plate Typing Sounds
มุมมอง 1.3K4 หลายเดือนก่อน
Redemption arc for the MX2A browns?? After using the Geon trimmer on these since the previous video, I've been finally able to really enjoy the MX2A browns without fear of any of my keycaps cracking at all. As much as I love the Merisi Sessantacinque I've rebuilt it like a billion times trying to find the perfect build. I really liked the previous build with regular mx browns on PP but idk PP p...
Kibou Fukuro - Cherry Mx Browns on Aluminum Plate Typing Sounds
มุมมอง 8585 หลายเดือนก่อน
Got a second chance to try out another Fukuro from a homie so massive thanks to them (ended up buying it from them lol)! This time, the board came with a millmaxed PCB so was able to do a bit of testing. Second time around, I actually opened the board up and noticed a couple of things that I didn't see when I previously borrowed Alceray's Fukuro. Biggest gripe with this board has to be the plat...
Keycult 1/60 - Cherry MX2A Browns on Aluminum Plate Typing Sounds
มุมมอง 2.7K5 หลายเดือนก่อน
*Oct 30th, 2024 EDIT/ADDENDUM* - Just wanted to put out a little addendum to my previous statement and say that I actually don't think the MX2A browns are responsible for cracking the stems of my GMK Burgundy, I believe its something wrong with this specific set itself. I have mounted the caps onto other switches like Gateron red inks and the cracking is still happening. I have never experience...
Studio Kestra Nue - Cherry Mx Blacks on Plateless Typing Sounds
มุมมอง 6365 หลายเดือนก่อน
Rebuild of this board came out so good! I think these mx blacks have finally found their forever home after being moved around several different boards. This sounds and feels so much better than the original build that came with this board that I showcased in the last Nue sound test. I honestly was a little underwhelmed when I first tried out the original build that was in this board, but I'm r...
Fjell Unikorn Gummy O-Ring Mount (Merro60 PCB) - JWK Pewters on Aluminum Plate Typing Sounds
มุมมอง 1.1K5 หลายเดือนก่อน
Fjell Unikorn Gummy O-Ring Mount (Merro60 PCB) - JWK Pewters on Aluminum Plate Typing Sounds
Midway60 - Cherry Mx Browns on Carbon Fiber Plate Typing Sounds
มุมมอง 6065 หลายเดือนก่อน
Midway60 - Cherry Mx Browns on Carbon Fiber Plate Typing Sounds
Studio Kestra Nue - Alpacas on Plateless Typing Sounds
มุมมอง 8316 หลายเดือนก่อน
Studio Kestra Nue - Alpacas on Plateless Typing Sounds
Kibou Fukuro - Leobog Browns on PC Plate Typing Sounds
มุมมอง 9526 หลายเดือนก่อน
Kibou Fukuro - Leobog Browns on PC Plate Typing Sounds
Keycult 1/60 - Gateron Black Inks on Aluminum Plate Typing Sounds
มุมมอง 7396 หลายเดือนก่อน
Keycult 1/60 - Gateron Black Inks on Aluminum Plate Typing Sounds
Lin Whale Special - Vintage Cherry Mx Browns on PC Half Plate Typing Sounds (Retest)
มุมมอง 6466 หลายเดือนก่อน
Lin Whale Special - Vintage Cherry Mx Browns on PC Half Plate Typing Sounds (Retest)
Martingale60 - Leobog Kaykings on Plateless Typing Sounds
มุมมอง 4867 หลายเดือนก่อน
Martingale60 - Leobog Kaykings on Plateless Typing Sounds
Merisi Sessantacinque - Cherry Mx Blacks on Aluminum Plate Typing Sounds
มุมมอง 2.5K9 หลายเดือนก่อน
Merisi Sessantacinque - Cherry Mx Blacks on Aluminum Plate Typing Sounds
Fjell Unikorn Gummy O-Ring Mount (Merro60 PCB) - Cherry Mx Ergo Clears on PP Plate Typing Sounds
มุมมอง 2.3K9 หลายเดือนก่อน
Fjell Unikorn Gummy O-Ring Mount (Merro60 PCB) - Cherry Mx Ergo Clears on PP Plate Typing Sounds
Keycult 1/60 - Cherry Mx Blues on Brass Plate Typing Sounds
มุมมอง 97910 หลายเดือนก่อน
Keycult 1/60 - Cherry Mx Blues on Brass Plate Typing Sounds
F1-8x 722 - w/ Diamond Polished Cherry Mx Blacks on Aluminum v1 Plate Typing Sounds (Retest)
มุมมอง 3.1K10 หลายเดือนก่อน
F1-8x 722 - w/ Diamond Polished Cherry Mx Blacks on Aluminum v1 Plate Typing Sounds (Retest)
Merisi Sessantacinque - Cherry Mx Browns on PP Plate Typing Sounds (Retest)
มุมมอง 3.3K10 หลายเดือนก่อน
Merisi Sessantacinque - Cherry Mx Browns on PP Plate Typing Sounds (Retest)
Lin Whale Special - Vintage Cherry Mx Browns on PC Half Plate Typing Sounds
มุมมอง 94510 หลายเดือนก่อน
Lin Whale Special - Vintage Cherry Mx Browns on PC Half Plate Typing Sounds
Midway60 - Cherry Mx Browns on Pom Plate Typing Sounds
มุมมอง 1Kปีที่แล้ว
Midway60 - Cherry Mx Browns on Pom Plate Typing Sounds
Mode Sonnet - Cherry Mx Browns on UHMWPE Plate Typing Sounds
มุมมอง 2.3Kปีที่แล้ว
Mode Sonnet - Cherry Mx Browns on UHMWPE Plate Typing Sounds

ความคิดเห็น

  • @oakerface95
    @oakerface95 3 วันที่ผ่านมา

    👀👍! congrats on the 400 subs! i really like the gat inks with alu plate, sounds amazing! (p.s. are you planning on doing anything at 500 subs?)

    • @chenyz
      @chenyz 3 วันที่ผ่านมา

      thanks as always oak! I actually really like inks on alu/stiffer plates like cf a lot too and honestly haven't thought about doing anything for 500 subs LOL if you have any cool ideas feel free to lmk

  • @clickaclacka4202
    @clickaclacka4202 3 วันที่ผ่านมา

    looks good, sounds better, where does this rank on your collection of mx 60s?

    • @chenyz
      @chenyz 3 วันที่ผ่านมา

      lemme make a list in order rn of most to least liked for all the 60s ive tried/owned, so currently in my opinion from most favorite to least: Nue, VP, Korn/drop in o--ring, KC 1/60, Fukuro, Ladybird, Midway60, and the Martingale being my least fav. its super close with the Kibou Fukuro since they're both top mount 60s but Fukuro edges it out for me just on looks alone. Ladybird looks more no frills but sounds a bit fuller than the Fukuro tho imo

    • @clickaclacka4202
      @clickaclacka4202 3 วันที่ผ่านมา

      ​@@chenyz great write up, seems our preferences line up lol. Plateless/half plate supremacy with o-ring second.

  • @kennychiwaa
    @kennychiwaa 8 วันที่ผ่านมา

    this is highkey a banger layout, sounds insane

    • @chenyz
      @chenyz 8 วันที่ผ่านมา

      make tkl with numpad instead of nav cluster meta (I don't even use numpad)

  • @Antonio-nn8he
    @Antonio-nn8he 9 วันที่ผ่านมา

    Me fail exam, me sad. Me see cheny video, me happy

    • @chenyz
      @chenyz 9 วันที่ผ่านมา

      happytonio

  • @stealthkbd
    @stealthkbd 9 วันที่ผ่านมา

    hell yeah man, i still regret selling my magicforce

    • @chenyz
      @chenyz 9 วันที่ผ่านมา

      its okay bro you made it up for it big time with the current banger boards you own

  • @oakerface95
    @oakerface95 10 วันที่ผ่านมา

    👀👍 really like how the original sound of the keyboard is mostly there, not blocked by something like tape mod. Its definitely classic sounding, very very nice! (p.s. I will never understand flipped spacebar users lul)

    • @chenyz
      @chenyz 10 วันที่ผ่านมา

      thanks as always dude! yeah way happier with the natural sound that I was able to get out of this build. also I’m usually not a flipped spacebar fan too but in regular orientation I get a weird ticking so I’m sucking it up and using it flipped LOL

  • @ericseguin2421
    @ericseguin2421 10 วันที่ผ่านมา

    wrist cankles

    • @chenyz
      @chenyz 10 วันที่ผ่านมา

      I got the unc sleeves on 😭

  • @mattheww6139
    @mattheww6139 11 วันที่ผ่านมา

    wooooo this sounds so yummy

    • @chenyz
      @chenyz 11 วันที่ผ่านมา

      topre so yum

  • @clickaclacka4202
    @clickaclacka4202 17 วันที่ผ่านมา

    in the clurb, we all fam. topre swing now, alps or space invaders next year same time

  • @oakerface95
    @oakerface95 17 วันที่ผ่านมา

    👀👍! topre with metal plates sounds really nice!

    • @chenyz
      @chenyz 17 วันที่ผ่านมา

      literally dude! you don't even feel that much of the stiffness so it makes sense to me how some custom topre builds just run brass plates

  • @alceray
    @alceray 17 วันที่ผ่านมา

    alps next!

    • @oakerface95
      @oakerface95 17 วันที่ผ่านมา

      i second this

    • @chenyz
      @chenyz 17 วันที่ผ่านมา

      bossibly

  • @Alemdar-2007
    @Alemdar-2007 18 วันที่ผ่านมา

    Very noice silent

    • @chenyz
      @chenyz 17 วันที่ผ่านมา

      the best type of silence

  • @gxiacu
    @gxiacu 18 วันที่ผ่านมา

    sounds rly rly good

    • @chenyz
      @chenyz 17 วันที่ผ่านมา

      fav part of the topre experience fr

  • @liahri
    @liahri 18 วันที่ผ่านมา

    very nice :o topre on top

    • @chenyz
      @chenyz 17 วันที่ผ่านมา

      dome be nice asf

  • @kennychiwaa
    @kennychiwaa 18 วันที่ผ่านมา

    switch to topre (i love this vid)

    • @chenyz
      @chenyz 17 วันที่ผ่านมา

      when i have more money maybe (i love you)

  • @stealthkbd
    @stealthkbd 22 วันที่ผ่านมา

    cheny doesnt miss

    • @chenyz
      @chenyz 22 วันที่ผ่านมา

      appreciate it brotha

  • @oakerface95
    @oakerface95 24 วันที่ผ่านมา

    👀👍! dang its been a while since ive seen this board. would you say that leafshrouding the browns is a necessity?

    • @chenyz
      @chenyz 23 วันที่ผ่านมา

      honestly no you really don't need to leaf shroud if anything I've been moving away from doing it. the mod does completely get rid of leaf tick in browns and other tactiles but the tactility of the switch gets reduced and the modded switches that are used the most basically become linear and I can feel/notice the inconsistencies. I've gone back to only lubing the back of the leaves

  • @Kfx998
    @Kfx998 27 วันที่ผ่านมา

    First comment

    • @chenyz
      @chenyz 26 วันที่ผ่านมา

      bro how are you so fast the video hasn’t even been posted yet

  • @rev_vin
    @rev_vin 28 วันที่ผ่านมา

    Hey Chen! What are ur thoughts on the Wooting 60HE+? (I lost my discord so ima try reach out to u here, have a new one if u wanna add me LOL)

    • @chenyz
      @chenyz 28 วันที่ผ่านมา

      yoooo! from what I've heard the Wooting is solid for gaming if you can take full advantage of the HE technology I don't really have full knowledge of how to tho on the technical side. sorry to hear about your discord too, you can re-add mine @ chenyz

  • @oakerface95
    @oakerface95 หลายเดือนก่อน

    👀👍! dang i really wanna try vp now, sounds pretty dang crazy shesh

    • @chenyz
      @chenyz หลายเดือนก่อน

      vp so good its up there with my goat 60s

  • @zdonuts9380
    @zdonuts9380 หลายเดือนก่อน

    Why is bro using a SUS steel bottom? Youre going to have to keep an eye on it bro.

    • @chenyz
      @chenyz หลายเดือนก่อน

      maybe this is why the keyboard moves to a new spot on my desk every night without me touching it, its the SUS bottom oml

  • @clickaclacka4202
    @clickaclacka4202 หลายเดือนก่อน

    hawt. Need to cut me a plate still, but just havent felt the need to mod mx lately lmao

    • @chenyz
      @chenyz หลายเดือนก่อน

      bro is in the throws of topre LOL whenever you do come around to mx, new vp plate will be hella fun to try out

    • @clickaclacka4202
      @clickaclacka4202 หลายเดือนก่อน

      @@chenyz how'd you know lmao, only been using my fc660 and orion v2.5.

    • @chenyz
      @chenyz หลายเดือนก่อน

      natural progression of the hobby goes towards topre haha im starting to get it too since im borrowing my friends sho s60 rn and im enjoying it a ton

    • @clickaclacka4202
      @clickaclacka4202 หลายเดือนก่อน

      @@chenyz waiting for my pendulum to swing back and to enjoy cherry browns again lol. Got too many boards with them. I do want to touch the high end of topre, but alas, need funds

  • @ampersandyco
    @ampersandyco หลายเดือนก่อน

    one of your favorite 60's you say

    • @chenyz
      @chenyz หลายเดือนก่อน

      it is indeed sir you kinda cooked on this one

    • @ampersandyco
      @ampersandyco หลายเดือนก่อน

      appreciate you cheny. you among others who took the chance on me will be eternally appreciated!

    • @chenyz
      @chenyz หลายเดือนก่อน

      gotchu homie appreciate all your work and effort for making a board ive been throughly happy with

  • @liahri
    @liahri หลายเดือนก่อน

    clean ^^

    • @chenyz
      @chenyz หลายเดือนก่อน

      tyyy

  • @kennychiwaa
    @kennychiwaa หลายเดือนก่อน

    i never knew a spacebar could slap me in the face this hard, so good...

    • @chenyz
      @chenyz หลายเดือนก่อน

      wait til I pull out the mx blues on brass build

  • @juantoreno
    @juantoreno หลายเดือนก่อน

    fkn hell this the one fs

    • @chenyz
      @chenyz หลายเดือนก่อน

      hits so much more different than the other builds I’ve ran

  • @shylocutus
    @shylocutus หลายเดือนก่อน

    LFG! this one sounds bomb, bring this one in dec

    • @chenyz
      @chenyz หลายเดือนก่อน

      yessirrrr this one’s probably coming with me to the next meetup

  • @oakerface95
    @oakerface95 หลายเดือนก่อน

    👀👍! this truly is the one. sounds solid as hell sheeesh. makes me want a build with pc plate with browns now ngl

    • @chenyz
      @chenyz หลายเดือนก่อน

      go for it dude, I absolutely love the combo any and every time I run it on a board

  • @LdonZion
    @LdonZion หลายเดือนก่อน

    Woaah. Awesome. Also thank you for sharing your audio setup on the description. ❤

    • @chenyz
      @chenyz หลายเดือนก่อน

      no problem thanks for the kind comment!

  • @masterchiefone5111
    @masterchiefone5111 หลายเดือนก่อน

    So good

    • @chenyz
      @chenyz หลายเดือนก่อน

      thanks homie

  • @worstrogueever
    @worstrogueever หลายเดือนก่อน

    banger as usual may I ask for the cuts and spacebar you are using for the plate this time around?

    • @chenyz
      @chenyz หลายเดือนก่อน

      thanks man! yeah so I got the PC plate cut by Hype Keyboards and he modified the file so that the spacebar switch actually has contact with the plate and the switch isn't just floating / sitting plateless. I can probably ask him for the modified plate file if you want it as well just lmk!

    • @worstrogueever
      @worstrogueever หลายเดือนก่อน

      @@chenyz it would be so great if I could get the adjusted plate file. I have been dabble with millmaxing the pcb, and now realized the same thing with the spacebar switch. I love cf plates and am planning to get one and test a bunch of switch out to see what would be best. However, it is a bit wonky with the spacebar switch being plateless tho.

    • @chenyz
      @chenyz หลายเดือนก่อน

      I hear you dude, my PCB for the Fukuro is millmaxed as well. with the stock plates you can pretty much only use a cherry switch in the spacebar since its its one of the only switches that's snug in the PCB without plate support lol. I unfortunately don't have the adjusted file myself, but I asked Tom from Hype Keyboards who did the modifications if he still has the plate file and he said he does! super nice guy who's been cutting my plates for the past couple years highly recommend him. Here's a link to his Discord so you can hit him up for the file or get a plate cut: discord.gg/GsvmbCTguW

    • @worstrogueever
      @worstrogueever 8 วันที่ผ่านมา

      @@chenyz it's so crazy that utube have not showed me the notif again... just a quick update, I cut a cf plate myself with tons of flex cuts (inspired by the thong cf plate from kbdfans), implemented the plateless spacebar design from the kohaku plate, popped in some browns with nk cream top, and it does sound loud, bassy and better than the original plate design thinking of having another flex plate cut like this, but still have not determined the material yet, any suggestions?

    • @chenyz
      @chenyz 5 ชั่วโมงที่ผ่านมา

      awesome build man CF slaps for sure! I have a CD player myself too but haven’t gotten around to filing any tests with it. If you want something similar to CF I think your best bets are either alu or FR4

  • @NomadicAssassin1
    @NomadicAssassin1 หลายเดือนก่อน

    makes me wanna get pc and browns for the f1 or spyder im getting

    • @chenyz
      @chenyz หลายเดือนก่อน

      def can't go wrong with either for both boards

  • @offbrandbiscuit
    @offbrandbiscuit หลายเดือนก่อน

    Confused, what do you mean it sounds worse in hindsight? It's maybe a bit loud, but it sounds pretty nice.

    • @chenyz
      @chenyz หลายเดือนก่อน

      I really liked how this config sounded at first but after re-listening a bunch it just sounds a bit thin to me that’s all. I have a way better config that I’ve been loving way more coming up

    • @offbrandbiscuit
      @offbrandbiscuit หลายเดือนก่อน

      ​@@chenyz ah interesting, will look out for it. Have you heard the news? Fukuro R2 is happening (sometime)

    • @chenyz
      @chenyz หลายเดือนก่อน

      @ I did see that! Some of the colors looking awesome like that dark green. I might pickup some extras for my unit

    • @offbrandbiscuit
      @offbrandbiscuit หลายเดือนก่อน

      ​​@@chenyz I want a green HHKB unit of that so bad 😂 would have a home for my GMK Taiga finally. That or just a generic DCS set

  • @oakerface95
    @oakerface95 หลายเดือนก่อน

    👀👍! are you gonna put jimcuh tiramisu on the board?

    • @chenyz
      @chenyz หลายเดือนก่อน

      it'd be a perfect fit for the board and I am indeed a jimcuh simp but ehh I've been happy enough with JTK FC living on the board

  • @figgletinkle
    @figgletinkle หลายเดือนก่อน

    yay

  • @hollytran9887
    @hollytran9887 หลายเดือนก่อน

    Sounds creamy 😩

    • @chenyz
      @chenyz หลายเดือนก่อน

      it do be creamy

  • @clickaclacka4202
    @clickaclacka4202 หลายเดือนก่อน

    type shi

    • @chenyz
      @chenyz หลายเดือนก่อน

      mr foamz

  • @Alemdar-2007
    @Alemdar-2007 หลายเดือนก่อน

    Cream sodas are goat

    • @chenyz
      @chenyz หลายเดือนก่อน

      one of my fav long poles after being lubed and filmed

  • @asterisk4424
    @asterisk4424 หลายเดือนก่อน

    Any issues with the cherry stems on your gmk keycaps, I've seen stories about them destroying the housings.

    • @chenyz
      @chenyz หลายเดือนก่อน

      I thankfully did not experience any cracking from the clears, but those stories are probably true. My set of GMK Demon Sword is pretty loose after being used a lot which is the only reason I used the ergo clears with it. The ergo clear stems do have bumps/small nubs on them to keep keycaps mounted on securely and were still hard to remove afterwards. If you have a Geon trimmer, I'd highly recommend to trim them before using them with GMK, I took a risk and got lucky that nothing cracked.

  • @Deatomizer
    @Deatomizer หลายเดือนก่อน

    Too Clacky. Needs silent reds :)

  • @moosekeyboards
    @moosekeyboards หลายเดือนก่อน

    OOO this is fire!

  • @faizduriat4427
    @faizduriat4427 หลายเดือนก่อน

    the og

  • @flowvs
    @flowvs หลายเดือนก่อน

    i think you like keyboards

    • @chenyz
      @chenyz หลายเดือนก่อน

      I just might

  • @alceray
    @alceray หลายเดือนก่อน

    interesting pickup, didnt see this one coming

    • @chenyz
      @chenyz หลายเดือนก่อน

      gotta satiate the spending addiction lmao

  • @DadTech1981
    @DadTech1981 หลายเดือนก่อน

    Did you get the mx2a browns unlubed?

    • @chenyz
      @chenyz หลายเดือนก่อน

      I bought them off a friend, but I don't think it was the unlubed variant like how Geon offers dry MX2A blacks. there was a bit of factory lube/oil on the stems that I wiped off before applying my own lube

  • @SequelExmortus
    @SequelExmortus หลายเดือนก่อน

    Is it edible

    • @chenyz
      @chenyz หลายเดือนก่อน

      indeed it is

    • @SequelExmortus
      @SequelExmortus หลายเดือนก่อน

      @@chenyz What is your exact position on the globe. I will be on my way shortly.

  • @kingcake8796
    @kingcake8796 หลายเดือนก่อน

    No idea why this got recommended to me but this sounds nice

    • @chenyz
      @chenyz หลายเดือนก่อน

      thanks! YT algorithm works in mysterious ways lol

  • @sacred-blade
    @sacred-blade หลายเดือนก่อน

    can i get the keycaps on their own?

    • @chenyz
      @chenyz หลายเดือนก่อน

      sure 10 robux or the v bucks equivalent of that

  • @gable1997
    @gable1997 หลายเดือนก่อน

    Wow

  • @chenyz
    @chenyz หลายเดือนก่อน

    *Oct 30th, 2024 EDIT/ADDENDUM* - Just wanted to put out a little addendum to my previous statement and say that I actually don't think the MX2A browns are responsible for cracking the stems of my GMK Burgundy, I believe its something wrong with this specific set itself. I have mounted the caps onto other switches like Gateron red inks and the cracking is still happening. I have never experienced this with any other GMK set and I have no idea why this is happening, its like the stems are just extra brittle on this specific set of burg. Maybe the caps were constantly exposed to sunlight causing the plastic to become brittle? I have no idea. The MX2As were unfortunately the first switches to make this problem super obvious to me. Just wanted to clear the MX2A's name and walk back on my previous statement, sorry for any confusion or misinformation.