วีดีโอ

why cant you charge Lithium Iron Phosphate as standard with this unit ?

Never tried it horozontal. Don't think I would even bother.

Would 1 ohm resistors be a larger load than say 5 ohms?

Hi Should it be setup for in or out mode?

​ @freeenergyonshore2828 ich hab das video auch gerade erst gefunden obwohl ich schon über ein jahr über 10 china turbinen getestet habe und umengen bewertungen, tests und videos kenne aber stimmt in englisch ist es schwer auffindbar ABER besser als gar kein video ;) unter kleinanzeigen per suche: "hybrid solar wind bastler" hab ich einige anzeigen bzw. bin dort zu finden ... über erfahrungsaustausch würde ich mich freuen u.a. auch weil ich gemerkt hab es ist ein großer unterschied ob eine 12 volt oder 48 volt turbine bei einem 12 volt system - die 48 volt versionen zum selben preis sind viel effizienter offenbar ?! und in deutschland ist die nachfrage groß bei kleinen windkraftanlagen ABER es kennt sich 1. kaum wer aus 2. die europäischen anlagen sind zu teuer teils 3. zu wenig dokumentationen ... aber die anlagen haben absolut potential ! vor allem ab 1,65 oder 2 meter ... verglichen mit anlagen für 1000 euro oder mehr kann man wirklich günstig was machen mit guter leistung aber auch der laderegler ist wichtig ! die standard wind laderegler vertragen glaub ich nur 4-5 ampere ladestrom daher glauben viele die china turbinen taugen nix - dabei liegt es entweder 1. am regler 2. falsche montage der turbine 3. zu wenig wind oder 4. idioten am werk (mit vollem akku, ohne akku, ohne verbraucher mit bohrmaschine getestet ^^ was zu falschen messdaten führt etc.) ... leider gibts viele "dumme videos" mit schlechten bewertungen über die windturbinen von leuten die glauben sie hätten ahnung und die masse der youtube user glaubt natürlich die halbwahrheiten ... dabei wenn man ausreichend wind hat - sind es "geniale geräte" zu "genialen preisen" !

Please, my 20a controller discharges my 20ah battery without any load, how to manage it?

Hi, I have a question: just connected Ista 1kw + controller (changed xy-cd60). IN +00.0v+ nbe….is that normal or does it have something to do with the voltage parameter the cd60? Will nbe change according to battery charging voltage..or could there be other reasons? OUT looks “normal “. Battery voltage was when I checked was between 26.0 and 27.8.

Could I bypass the rectifier to run my PMG with in built rectifier? Thank you for your posts really great information.

Nice to see another ista breeze in flight. But Yes unfortunately the 120v 1500w on sliding contacts in the slip ring will result in a burnt out slip ring, so to avoid any damage i have learnt from people all over the world that have turbines on youtube to try and avoid braking and build a good dumpload or i have seen a guy tie an anker to the tale holding tthe tubine out of the wind. In Ireland thiers a guy whos found a 30amp 6 wire slipring.

I like the display on that meter usually they are quite hard to film but that one looks pretty clear.

Thank you from Ukraine for your insight, we struggle with constant Russian attacks, so decided to create home wind turbine diy

What's is the limit of dump load what you can add

Hallo zusammen. Weiß jemand was für ein Stecker das genau auf der Sekundärseite des Wechselrichters ist?

Meine Lösung für das Temperaturproblem sieht wie folgt aus: Ich habe aus einem alten KFZ Wechselrichter ( 20€) einen kleinen Lüfter ausgebaut,ca. 4cm Durchmesser. Dieser läuft mit 12V/ 0.1A .und kühlt +/- Eingänge Solar/ Batterieanschlüsse, sowie das Gehäuse vom Laderegler ausreichend mit Wind. Damit sind alle Probleme bezüglich Temperatur sofort erledigt. Läuft über ein 12V Ausgang aus meiner Powerstation.

I parked an MG rental car at a carpark with solar on the roof of the car park, the remote control for the car refused to work ( I couldn't lock the car), I changed the remote battery thinking that was the issue... But even with a brand new battery it still didn't work. Luckily I managed to start the car and moved it away from the solar panels. I'm assuming the charge controller created interference.

When I hook this system to my 48v system the turbine will spin up fast enough to make good a.c. current before the rectifier. When hooked up to my 12v battery, the turbine bogs down and struggles to keep voltage up. I hope that when adjust the XY CD60 then connect the charger straight to the battery it will act better.

Istabreeze said no to sending me a programable one.

Great stuff, vey helpful! Do you know how to add an automatic dumpload? For example if you are charging a battery and the battery is full the wind tubine power is auto diverted to a dump load at the full voltage of the battery to protect the battery and then back to the battery when it needs charging again

Hallo Alex! Habe deinen Kanal über Google gefunden, als ich für den Heli 2.0 ein Mast tower finden wollte. Ist es möglich mit dir kurz zu unterhalten? Ich lebe mittlerweile in Dänemark und Wind haben wir genug. Ich habe versucht über deinen Kanal die E-mail Adresse zu finden, damit ich dir schreiben kann, aber hat leider nicht geklappt. Ich werde mich sehr freuen, wenn ich mit dir in Kontakt treten könnte. LG Bharat

Thank you. I have solar-charged lighting in the equipment shed (riding mower, leaf blower, etc, etc and storage for treated gasoline). The lighting is used, at most, twice a day for 20 minutes each time - time to get equipment out of the shed to do yard work and time to put that equipment away when the work is done. The switch for the lights is a 60 minute wind-up timer which ensures the lights can NOT be left on. In extensive testing (I'm a statistics geek ;-), a PWM controller (EPEver LS1024) was compared to an MPPT controller (EPEver XTRA1210) - both of those can be monitored and the data collected by a computer or with the EPEver eLog01 recording device. Because the MPPT controller's idle current (the Brits say "self consumption") is higher than that of the PWM controller's (roughly double) and the location of the 30 watt solar panel is not optimal, in several days recording of the lighting usage and subsequent re-charging, at the end of the day the PWM controller delivered more charge to the battery - and that's what is important: how much power is delivered to the battery. If you add a better heatsink to one of the small PWM controllers, you need to use plenty of heatsink compound (thermal grease) to maximize heat transfer from the controller's metal back to the added heatsink.

❤

❤

Was ich jetzt nicht genau verstanden habe ist woran liegt es das er nach dem aufladen immer noch Strom an die Batterie abgibt?

Like your videos, can you answer a question? I have this same controller hybrid 12 800w, my wind turbine is 400w and about 30 meters from my controller and it is not producing a lot of power, can I put a 1000w windmill to this controller, taking into consideration the length of my cable 30m I don't think Il even gett 800w to the controller, and dos it mater if the windmill is 12v ore 48 volts

Thanks for the video! Have you already determined which cable sends the most RF interference? Will you show troubleshooters you've tried that didn't work and those that helped with your installation? Kind regards from Schleswig-Holstein, Dietmar, DL4HAO (I wrote in English because you also published this video that way) 😉

Could you add two switches? A soft dump load and a full "short" brake? Switch the soft then the full brake?

Hello, can you please help me. I have bought an Instabreeze 2kw 48v and I have a chinese Hybrid Controller 2kw 48v but it seems that it doesn't charge at all. When i connect only two wires it starts spinning and It shows that is charging but when i connect all 3 it slows down (no brake) and only charge up to 50w when outside are strong winds, no matter how strong they are the turbine is not spinning fast enough. The brake works fine and I had winds where it came active. I've tried to disconnect two wires, it starts spinning very fast when i connect the other two it still charging good for another minute then it slows down again for no reason, no break active. Thank you in advance. I have struggling for 1 month and still can't fix the issue.

Hello, can you please help me. I have bought an Instabreeze 2kw 48v and I have a chinese Hybrid Controller 2kw 48v but it seems that it doesn't charge at all. When i connect only two wires it starts spinning and It shows that is charging but when i connect all 3 it slows down (no brake) and only charge up to 50w when outside are strong winds, no matter how strong they are the turbine is not spinning fast enough. The brake works fine and I had winds where it came active. I've tried to disconnect two wires, it starts spinning very fast when i connect the other two it still charging good for another minute then it slows down again for no reason, no break active. Thank you in advance. I have struggling for 1 month and still can't fix the issue.

Hello, can you please help me. I have bought an Instabreeze 2kw 48v and I have a chinese Hybrid Controller 2kw 48v but it seems that it doesn't charge at all. When i connect only two wires it starts spinning and It shows that is charging but when i connect all 3 it slows down (no brake) and only charge up to 50w when outside are strong winds, no matter how strong they are the turbine is not spinning fast enough. The brake works fine and I had winds where it came active. I've tried to disconnect two wires, it starts spinning very fast when i connect the other two it still charging good for another minute then it slows down again for no reason, no break active. Thank you in advance. I have struggling for 1 month and still can't fix the issue.

Would a small micro hydro generator work on the small wind controller even if it has just 2 red&black wires?

I have had one of these installed in my shed solar system for the last 12 months and downloaded the app to my phone definately MPPT.....excellent price as well.

Hi sir, can I use this module to charge my 3s lipo battery btw I will be connecting 12V, 6W solar panel. PLEASE REPLY SIR

You keep pressing buttons and NOT saying what you do. Just useless

It is a pity, but almost all such devices makes such RF noises, because build on some pulse principle. As HAM I would not go to buy any without a kind of spectrum analyser test. I got the same problem with central heating UPS, that makes very nasty pulsing noise about every half second. 😢 I am thinking about making some kind of wiki or independent online DB about these devices noise levels...

Hello Alex, thanks a lot for your Videos!! You added the dump loads to the main switch - that means that you only can switch to dump loads by the switch or what i suggest that the controller is also able to switch to the dump loads in that setup? thanks

I have a crazy Idea, can you make the regulated output of the wind charge controller as an input of a solar charge controller, coz Im planning this as an input for my hybrid solar off-grid inverter charge controller, because in that inverter not much power is wasted because when the inverter sense that the battery is full the generated energy is then be used first by current house consumptions and wind turbine have a lot of wasted energy going into the dump load

Can we use any form of dumping load? Such as running Dc fans for home cooling system instead of getting the excess energy wasted?thanks

Question / Frage: will the solar pannel cable pulling through/into a metal pipe have the same endresult as the twisting ? / Will man dasselbe reasultat erzielen wen man die leitungen vom PVC zum MPPT in ein metalisches rohr zieht? Thank you for your reply - vielen dank fuer ihre Antwort. 73 de VA2VFF

1. could i use 1 dump load resistor, by connecting one wire of the resistor to the middle terminal and the other wire to both the left and right terminals on the isolator switch 2. will the dump load resistor completely brake the turbine? 3. can the turbine remain connected to the controller whilst being shorted/braked 4. can the dump load resistor remain connected to the controller whilst being used as a brake with an external isolator switch?

Please how did you connect the wires show us on camera thanks or did you remove the wires coming from the brake and connect the wires from the resisters? thanks

Hallo zusammen ☀️ Gibt es noch ein Update zum Beitrag?

I Have the same controller but 1500 watts, it does not display battery voltage correctly it displays .5 volts less than across the terminals in the controller. I was concerned it would affect charging, but insta breeze told me to compensate the voltage on the display by -.5 volts for the in and out, mine is unlocked. Do you think that will work?

Hi, do you know if it’s possible to adjust the voltage on the newer Ista charge controllers? They have the LCD display inside the box and it’s a different unit. Thanks

Hello sir, The output power watt about 800 watt is quite good. I am new to invest in wind turbine. 1) Can you please tell what is rating of this istabreeze wind turbine? 2). Please tell where to buy this kind of good turbine in smaller version with rating about 1000 Watt

Ich hab mir das auch gekauft, macht genau das was es soll, alle Werte passen sowie angegeben, deckt meine tägliche Grundlast , rein rechnerisch wird es bei mir auf jeden Fall sein Geld nach etwa zwei Jahren einspielen. Material ist alles sehr ordentlich und auch nicht viel schlechter oder besser als bei anderen Anbietern. Ich versteh auch nicht die ganzen negativen Kommentare zu dem Teil nicht,Die Daten sind vor dem Kauf klar und da braucht man doch nicht meckern sondern soll sich doch einfach für mehr Leistung gleich was größeres kaufen und nicht die Leute schlecht reden.

Hello! Sooo my 48 volt battery charges at 54.6. If i set the module at 54 volts will the module not charge past that voltage?

Glück Auf, Endlich mal ein Video was sich sehen lassen kann (China ist halt das Gelbe vom EI)

Do you know how to calibrate the voltage display? Mine is off by .7 volts...not good

Thank you for the tips I have a Victron blue charger I need to shut up . 73's

Sondermüll und viel zu teuer!