วีดีโอ

@@cannabiscove niiice

@ question brother if you can help, planning on running stock ecu do I need anything else other than the oem ecu to make it run?

@cannabiscove nah just plug everything in. All the fuse boxes ect. Wire up the fuel pump off the CL harness

@@octanemayhem2686 awesome dude. Can I use stock fuel system?

@cannabiscove if it's drive by cable, gen 1 J series (j32a2) it will be fine using the Civic fuel pump / filter

@@AngelEyez727 just some black housing headlights. Nothing brand specific. Stock taillights. Some BC Racing Coilovers.

Thank you so much

@ I forgot to ask did you also change the fog lights ? and are there such thing as black housing taillights to match the headlights or just gotta buy new stock taillights ? Sorry to ask so many questions, I’m new to this 😅

@AngelEyez727 not sure on taillights. And no I didn't have fog lights on this bumper

@@octanemayhem2686 One more question. What are the wheel covers ?

@@jeanhenriquez1986 TH-cam certified 💪

@@skooterward2934 BC Racing BR Series. BC Racing. Com

@larrycorpuz2644 for the most part. Aside from mounts and axles whether you build them or buy them.

@ What about the harness?

@larrycorpuz2644 If you wanna do it for free, you're gonna have to gut out your entire civic harness. And what we did was we just took the TL harness and fuse boxes and hung them from the dash support bar inside the car. You'll keep all the plugs for the Civic headlights and taillights and wire them up to the TL wires. Same with the fuel pump. So everything will be powered by the TL harness. I even put the TL turn signal and light switch /and TL ignition on the Civic steering column so everything will plug in. All you have to do is make sure you get all the grounds and run 12v power to the main fuse box. If you wanna keep heat and AC you can prob wire them up the same way off the TL harness but we never did.

@boostedbean6912 yes as far as i know that's the way people are doing it. J2K. The adapter plate for the transmission is pretty expensive and find all the components for AWD will be tough. But yeah J2K.

@@waynejordan7473 yessir 💯

@fuadhasan1247 it's just a purple led bulb w black housings

@@kowalpawel23 6 speed manual transmission. 2003 Acura CL 6MT

@@JuanMontoya-e5v yoo

@@adriancopes4363 which parts ?

@jesuscovarrubias7609 For my 6spd I just used the factory dual mass flywheel and the donor car came w an Autozone clutch.

@P71ScrewHead 0-60 not sure. My best 1/4 so far is 13.11. A lil slow. But for 1 I'm still on street tires so I don't get traction for 1st and 2nd. And still stock ECU w no tune. And I'm still new to being at the track. But when we get a tire and some things figured out I think a 12.5 is definitely possible on stock ECU. Prob in the 10s w a 75 or 100 shot.

@octanemayhem2686 Sweet, I definitely don't think that's slow I'm in the 14s in my P71..lol Get it tuned..

@@P71ScrewHead saving up for a Fueltech550 and a PJsCustoms harness

@octanemayhem2686 Sounds good man..

​@octanemayhem2686 wow i actually expected faster times. I'm currently in the low 10s with a D16Z6 del sol si.

@Jay-sw4mc Deleted all the heater and AC stuff. As for all the lights I just connected the Civic plugs to the corresponding wires on the CL harness. Running lights turn signals ect.. you could prob do the same with the heater unit but I didn't that for 1 it was too much extra time and research for the wiring at the time and I'm trying to make my car as light as possible. If you have the money PJs Customs will make you a jumper harness to be able run everything like factory.

@@octanemayhem2686 thanks for responding. I’m trying to do it all my self . The 6 month waiting period is to far away for me

@Jay-sw4mc no problem. Yeah i don't mind the no heat thing too much. I don't drive the car much in winter anyways

@@brianw1348 just painted it black

@ChristianGomez-b6d you can still use your stock radiator too. I've seen a few J swaps like that. As far as this one I'm not sure. I think it may be too close to the header tbh

I have a dual core single radiator but sometimes tuns kida warm my j32a2 is supercharged im just trying to keep it as cool as possible ​@octanemayhem2686

I have the dual core ek small radiator but sometimes my gauge got to red once but no boiling at the raditor think its air ​@octanemayhem2686

@@ChristianGomez-b6d it could be, maybe a thermostat too.

@alvinmckithen5140 TBH w that specific platform already being Kseries with a 6 speed id just invest in some upgrades for it as is. Unless you're really wanting a J and have the budget id say it would be cool. Or if you're getting a good deal on a rolling chassis. But for me personally if it's still K id leave it. Keep all the creature comforts. Invest in a turbo kit and a stand alone ECU.. Sometimes it sucks not having heat or AC in a budget swap like we've done. There's just too many variables to say for sure what the best route would be.

@ChristianGomez-b6d yeah. Just plugged the drain plug and flipped it so the hoses are on the driver side.

Dam bro you replied fast I was expecting like a reply in 6 years lol and I figured I've seen ppl sue them on b series no issues with the drin plug the right way just figured I'd ask I want to upgrade

@ChristianGomez-b6d I'm active on here. Anything else you need lmk ..

Thanks and ever scince i came across the channel i say watching bro thanks once agin bro !​@octanemayhem2686

Thanks bro and will do ​@octanemayhem2686

Thank you guys again.. 🤟💯💯

@tovitovar361 idk if I seen you bro. If you see me out, say wt up. 🤙

@@octanemayhem2686 I was going ask about the price on the car, you were busy salt n pepper the burrito 🌯 lol 😂

@tovitovar361 oh shit lol. 🤣 yeah I was on a mission that day going to main office for work. Was running late but hungry lmao

@@octanemayhem2686 them Blake’s is cost or nor lost you hungry we all hungry Blake’s at any cost we eaten!!

@davidcampo1522 radiator hoses. We just used the TL hoses. Kinda cut them and fitted them to the Sunoco radiator. As far as electrical, like I said we just wired up the fuel pump and lights off the TL harness.

Any recommendations on mechanics? Or do you work on customers cars.?

@davidcampo1522 depends on where you're located. But as for us we just work on our own stuff for now. you can do it. Invest in some tools if you don't have what you need.

I'm in southern Cali

@davidcampo1522 there is a guy in Bakersfield that does work on J Swaps.

@seayvisions4511 closing the hood is definitely not a priority. Focus on oil pan clearance.. and why run a hood when you're shaved and tucked 😉

I have ekj2 mounts I just maxed out my suspension and rides perfect little verry little exhust scape with 5 ppl in it

@talcooper7606 yeah we have 2 auto J swaps

@@sorenwhipps ESR CS01 19x9.5 +22. On 225/40

@gavinmcclure8047 i haven't tried it myself. But IMHO stuff like this is never "needed" in the sense that it puts a stop on a build. There's always a work around. It really depends on if you're willing to cut if you need to fit it as is. If you're not willing to cut yeah you'll probably "need" it...

@octanemayhem2686 i just don't know if it will rub against the lights. I haven't gotten that far yet. I always collect parts before I do a build. It's been a while since I have done a honda.

@@gavinmcclure8047 it does rub i had to the headlight housing and the metal right there.

@gavinmcclure8047 i believe the 03 is LSD. Not 100% sure about 04

2003 acura cl type s is lsd but it has its own different sendors i have a accord one and a cl type s full 6 speed​@@octanemayhem2686

04 is also lsd, my 04 motor is drive by wire sadly and it has a returnless fuel system

@gavinmcclure8047 there's a video about budget fuel system for j swap. I believe me mentions that. As for the drive by wire just use the TL pedal. Mount it in the EG. 👍

@@octanemayhem2686 i need to find that video about the fuel system

@mselliot2 idk tbh. Try it out.

@@octanemayhem2686 another question, would this work without removing the ac compressor?

@@mselliot2 negative..

@@octanemayhem2686 thanks

@@narkaras 19x9.5 +22. On 225/40. BC Racing Coilovers

@3732NorelyMunguia like I said. That all depends on budget. Mounts and axles for sure. Engine and transmission. Harness and ecu.

@hanzkelvillanueva3433 make it happen bro. 🤙