22 Rimfire ultra
22 Rimfire ultra
  • 178
  • 324 167
CZ 457 MTR with 26" Lilja barrel with and without tuner: A Very Small Trial
CZ 457 MTR Action and stock.
Lilja 26" barrel. Set for Eley.
JARD trigger.
Harrell's Precision Rimfire Tuner. Randolph machine front rest. Protektor rear rest. Eley Tenex. Lithgow LA101 Benchrest Bag Adaptor.
A small trial testing Harrell's Tuner against no tuner.
In short, the tuner 10 target bulls were significantly better than the non-tuner bulls.
The non-tuner 5 round groups however, were better than the tuner groups.
I prefer the more accurate targeting.
มุมมอง: 957

วีดีโอ

CZ 457 MTR Build Head Space Shimmed for Eley
มุมมอง 1.8K2 หลายเดือนก่อน
This CZ 457 MTR is fitted with a 26" Lilja Match barrel. Headspace was set at .040" with a .003" shim on the tenon. The bolt face depth was measured at 1.238". An attempt was made to shim the headspace to .038" but bolt would not close. If went to .039" head space there may be a bit of 'crush' on the rim, therefore .040" was chosen and works well. As seen in the video a Forster .043" 'Go' gauge...
CZ 457 Varmint to CZ 457 MTR Conversion with Lilja and JARD Headspace Shimmed for Lapua
มุมมอง 3.1K2 หลายเดือนก่อน
This CZ 457 started out as a beautiful 457 Varmint. It shot well and felt super in hand. A decision was made to modify it with a MTR stock, a Lilja 26" match barrel configured for .043" headspace, changing to a 3 ounce JARD trigger, and adding a front bag adapter purpose made for Lithgow LA 101 found on ebay.AU that fits perfectly. Today was the rebuilt rifles first time at the range. Groups we...
Triggers 22LR Precision
มุมมอง 1.2K3 หลายเดือนก่อน
A look at 5 precision triggers. Utilized on 22LR set ups. All are superb. Most, (if not all), of these triggers can be adjusted to lower or higher pull weights than shown on this video. I have left them as they arrived from the factory. A mix of single and two stage. I contemplated describing the trigger press, the feel of the blade, break crispness, etc. But I feel the video of the actual sque...
'Circles' drill by Nut n Fancy
มุมมอง 1923 หลายเดือนก่อน
Out this morning to up the round count in the V22s. Wanting 1000 rounds for 'fouling' prior to lot testing later this year. Will be testing for Center-X and maybe Midas . With a few boxes of SK Pistol Match Special (same lube and lead composition as Lapua I've read), Nut n Fancy's accuracy/consistency target was used for about 90 rounds. It was a fine beautiful morning. The birds were full of '...
Group Shoot and Bird Sounds
มุมมอง 1693 หลายเดือนก่อน
Out this morning to up the round count in the V22s. Wanting 1000 rounds for 'fouling' prior to lot testing later this year. Will be testing for Center-X and maybe Midas . With a few boxes of SK Pistol Match Special (same lube and lead composition as Lapua I've read), a few groups were done. It was a fine beautiful morning. The birds were full of 'springtime'! Five 10 round groups. None too grea...
Morning Out With V22s
มุมมอง 9633 หลายเดือนก่อน
Vudoo V22s Single Shot Lapua Center-X Early Morning 50 Yards USBR Target: groups and bulls 60*F Winds 1-3 MPH
All Guts No Glory Day At The Range Challenge
มุมมอง 4463 หลายเดือนก่อน
All Guts No Glory Day At The Range Challenge Rules at Day At The Range for scoring. 50 yard distance. Vudoo V22s. Lapua Center-X.
RimX on a Cold Day
มุมมอง 3983 หลายเดือนก่อน
RimX with Nevus Custom Bench Rest Chamber Trigger Teck Diamond Rem 700 @ 6 ounces. MullerWorks 24", 1.2" straight contour 8 groove, 1:16 twist barrel. WOOX Exactus Stock Cambered For Lapua On this day Eley Tenex
Vudoo V22s Single Shot Target
มุมมอง 5373 หลายเดือนก่อน
Vudoo V22s Single Shot Target Gunsmith: Vudoo Gunworks Right Bolt, Left Port 22LR Bartlein BR 0.91" Straight Contour 26", 1:16 Twist Bix' N Andy BR Competition 2 Stage McMillan Kestros As noted, tight muzzle at crown.
Front Rest 3 Inch Forearm Adapter LA 101 to 457 Varmint
มุมมอง 4834 หลายเดือนก่อน
From ebay AU I obtained a Front Rest Adapter for a 3" bag, made for Lithgow LA 101 by 'neo industrial design'. It is super for benchrest shooting stability of the Lithgow. Looking at the forend of the LA 101 it seemed very similar to the CZ 457 Varmint stock forend. I gave it a trial fit and it seems tailor made. No wobble!
Easter Egg Hunt Day At The Range
มุมมอง 1944 หลายเดือนก่อน
Out to the range today between rain showers. Forgot camera and tripod. Completed target. Results as shown. RimX, CtrX, Muller Works barrel 24", Randolph Machine Front Rest, Protektor Rear Rest. 50 yard range. Wet day. 3-5 MPH cross winds.
RimX 3 Groups 50 Yards
มุมมอง 8004 หลายเดือนก่อน
Nice day today. 55* F, winds 3-5 MPH intermittent. 50 yard range with RimX action 22LR, 24" Mueller Works barrel 1:16 twist, WOOX Titano stock/chassis, Lapua Center-X non-lot tested. Barreled action put together by Desert Precision Gun Works, Randolph Machine front rest, Protektor rear rest. 3 groups in between 5-7 MPH wind gusts. Mostly sunny sky and pleasant temperature. The rifle was shootin...
St Patrick's Day Challenge
มุมมอง 4085 หลายเดือนก่อน
Day At The Range's St. Patrick's day Challenge. It was not necessarily easy........."The longest way around is the shortest way home". V22 with Ctr-X on a cool, wet, occasionally drizzly, 2-4 MPH wind day.
Seasoning/Fouling With Ammunition Change-Up And The Resulting Improvement In Accuracy
มุมมอง 3577 หลายเดือนก่อน
I have used Eley for the prior 80 rounds in the RimX. The chamber was 'Smithed' for Lapua, but I wanted to use some supply of Eley. Today it was time to switch to Lapua, its chosen round. I thought 15-20 rounds for fouling would probably foul the barrel enough to make for a sufficient change over. I in fact shot 30 rounds for sighting in and fouling. This was followed with target number 1. The ...
17 Yard Outdoor Practice For Indoor Range CCI SV Lapua Ctr X
มุมมอง 3037 หลายเดือนก่อน
17 Yard Outdoor Practice For Indoor Range CCI SV Lapua Ctr X
Follow Up Barrel Shaft Collar Trial Eley Tenex and Lapua Center X
มุมมอง 3.4K7 หลายเดือนก่อน
Follow Up Barrel Shaft Collar Trial Eley Tenex and Lapua Center X
Barrel Harmonic Wave DeResonator Trial With Shaft Collar
มุมมอง 5K8 หลายเดือนก่อน
Barrel Harmonic Wave DeResonator Trial With Shaft Collar
Tuner Trial Time.....Follow Up On Prior Results
มุมมอง 1.2K8 หลายเดือนก่อน
Tuner Trial Time.....Follow Up On Prior Results
Harrell Tuner 0 Through 475 Rotations For Evaluation
มุมมอง 1.8K8 หลายเดือนก่อน
Harrell Tuner 0 Through 475 Rotations For Evaluation
Springfield 1922 Aftermarket M2 Magazine 5 Round
มุมมอง 2028 หลายเดือนก่อน
Springfield 1922 Aftermarket M2 Magazine 5 Round
Gilding The Lilly. Harrell Tuner Dialing On Vudoo V22 With Center X
มุมมอง 1.9K8 หลายเดือนก่อน
Gilding The Lilly. Harrell Tuner Dialing On Vudoo V22 With Center X
RimX: Eley Tenex and Lapua Ctr-X Super Long Range A Short Comparison
มุมมอง 1.1K8 หลายเดือนก่อน
RimX: Eley Tenex and Lapua Ctr-X Super Long Range A Short Comparison
Ransom Rifle Master Front Rest
มุมมอง 4778 หลายเดือนก่อน
Ransom Rifle Master Front Rest
V22 Lot Testing: Some Eley, Some Lapua
มุมมอง 1.3K8 หลายเดือนก่อน
V22 Lot Testing: Some Eley, Some Lapua
V22 Mag vs Single Feed Ctr x
มุมมอง 3288 หลายเดือนก่อน
V22 Mag vs Single Feed Ctr x
Grinchmas Challenge
มุมมอง 5208 หลายเดือนก่อน
Grinchmas Challenge
Magazine Feed vs Adapter Single Feed A Small Comparison
มุมมอง 3689 หลายเดือนก่อน
Magazine Feed vs Adapter Single Feed A Small Comparison
Lithgow LA 101 and Dart Target With Ctr X and R50
มุมมอง 2239 หลายเดือนก่อน
Lithgow LA 101 and Dart Target With Ctr X and R50
10/22 Kidd Feddersen Barrel Dart Board Target
มุมมอง 2259 หลายเดือนก่อน
10/22 Kidd Feddersen Barrel Dart Board Target

ความคิดเห็น

  • @RimfireAddicted70
    @RimfireAddicted70 วันที่ผ่านมา

    My first rimfire tuner was the PDT by Ezell Custom and once I messed around and learned how to tune I'm sold on them. They do work, but they are not a 1 time set it and forget it forever thing that some shooters think they are. They really do help tighten things up when you have the correct ammo for the barrel and of course do your part pulling that booger hook right.

  • @jwoodshed1108
    @jwoodshed1108 วันที่ผ่านมา

    Yep. Waste of time. The worst ammo you can find in the box will still go in the same group.

  • @ericrumpel3105
    @ericrumpel3105 วันที่ผ่านมา

    I have discoverd 50Y & only one day of testing is inadequate ,.....go 100Y & shoot different days using the Carlos Hathcock method - 1 shot one day/1 shot day 2/1 shot day 3......ie - no sighters/no foulers/different days - different weather = reality for hunting & matches alike. I have done alot of this with my 22's because my range is out my back door, & it is REALLY an educating exercise

    • @22rimfireultra67
      @22rimfireultra67 วันที่ผ่านมา

      I may do just that. I'll have to look up the Hathcock method. Thanks for the suggestion!

    • @22rimfireultra67
      @22rimfireultra67 วันที่ผ่านมา

      americanshootingjournal.com/carlos-hathcock-method-of-sighting-in-a-rifle/

  • @CountryRimfire
    @CountryRimfire 2 วันที่ผ่านมา

    Very nice shooting! 👍 😊 Was that a clamp on tuner?

    • @22rimfireultra67
      @22rimfireultra67 วันที่ผ่านมา

      Yes the Harrell's Tuners are 'clamp on'. They are machined for each specific barrel at time of order.

    • @CountryRimfire
      @CountryRimfire วันที่ผ่านมา

      @@22rimfireultra67 oh very nice! I am going to look into these. Thanks for the info 👍

  • @perdidocamaronero5400
    @perdidocamaronero5400 2 วันที่ผ่านมา

    Did you make a scope adjustment after removing the tuner?

    • @22rimfireultra67
      @22rimfireultra67 วันที่ผ่านมา

      Yes. Sighted in with approximately 5 rounds. Then 5 additional for repeatability verification.

  • @1mccactus
    @1mccactus 2 วันที่ผ่านมา

    Excellent timing, I have just ordered one for my CZ457 MDT and hope to get something similar from mine 🤞. Nice work 👍

  • @HSmith-uk9hl
    @HSmith-uk9hl 2 วันที่ผ่านมา

    Nice to see you back. I'm not so sure that the tuner is more accurate. Your groups with the tuner seem to be more centered on the bull (zeroed) than the groups without. If you zeroed your rifle without the tuner, I believe your results would have been better. Even so, that was good shooting in the wind.

    • @22rimfireultra67
      @22rimfireultra67 วันที่ผ่านมา

      Shooting without tuner has been good with the 26" Lilja. The 10 accuracy rounds with the tuner ( with the exception of the flyer on the 8th bull ?) seem to be just a bit better. I need to do full target comparisons with and without. 😏

  • @bfox87
    @bfox87 2 วันที่ผ่านมา

    📌🔨🎯

  • @user-dc9fx1im8j
    @user-dc9fx1im8j 2 วันที่ผ่านมา

    Very Good 👍

  • @pm-sv9kh
    @pm-sv9kh 3 วันที่ผ่านมา

    Gute arbeit, tolle Gruppen mit einwm tollen Gewehr

    • @22rimfireultra67
      @22rimfireultra67 3 วันที่ผ่านมา

      Vielen Dank. Anschutz ist eines meiner Lieblingsgewehre zum Schießen.

  • @floridagunrat1625
    @floridagunrat1625 4 วันที่ผ่านมา

    Beautiful rifle and some great shooting! Awesome day on the range, thanks for sharing! Rat

  • @guitarzan2626
    @guitarzan2626 5 วันที่ผ่านมา

    Nice one. Hard to find in unmolested condition.

  • @floridagunrat1625
    @floridagunrat1625 6 วันที่ผ่านมา

    Nice shooting! I have a soft spot for the Anschutz. What scopes were you using? Beautiful range, too!

  • @patcropper5333
    @patcropper5333 10 วันที่ผ่านมา

    I don't believe you gave the distanxce to the target. ALWAYS, ALWAYS, ALWAYS GIVE THE DISTANCE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

  • @hawkeyeinthehouse2995
    @hawkeyeinthehouse2995 16 วันที่ผ่านมา

    Very NICE 22LR rifle, Mauser makes GREAT WEAPONS!!! I have several OLD ONES, trainers from the early 1930s (Es340N, Es340B and a Sporter model, which has the same action of the ES340B except a BEAUTIFUL checkered walnut stock and a lighter weight barrel, it's GORGEOUS and in VG+ CONDITION!!!! They don't too often make them like this anymore EXCEPT FOR MAUSER!!!! Thank you for letting me see your BEAUTIFUL CURRENT SPORTER 22LR RIFLE!!!😊😊

  • @TheWheels1965
    @TheWheels1965 20 วันที่ผ่านมา

    Hey, try weighting the ammo first it helps with fliers.

  • @WhiteWolfCZ457
    @WhiteWolfCZ457 23 วันที่ผ่านมา

    Brilliant video! Thanks for taking the effort and posting. The RWS Rifle Match is my go to ammo for my BRNO mod.2 (82) and my CZ457 MTR. It just shoots consistently good. I have had good results with a cpl of lots of R50 to, but it's like the Rifle Match outperform all others in general. Stay safe!

  • @chrislang5659
    @chrislang5659 23 วันที่ผ่านมา

    Looks like it works!

    • @22rimfireultra67
      @22rimfireultra67 23 วันที่ผ่านมา

      There were a couple of nice settings to be sure. I still do not use a tuner however. Plan on another trial or two this summer.

  • @crstewart90
    @crstewart90 24 วันที่ผ่านมา

    Did the chassis require modifications to accommodate for the large diameter barrel?

    • @22rimfireultra67
      @22rimfireultra67 24 วันที่ผ่านมา

      No chassis modifications were required for the Kidd Supergrade.

  • @ykdickybill
    @ykdickybill 24 วันที่ผ่านมา

    Please could you tell me what make your rear leather rest is please ? Many thanks

    • @22rimfireultra67
      @22rimfireultra67 24 วันที่ผ่านมา

      Protektor. They have a nice web site.

  • @kencurtis508
    @kencurtis508 หลายเดือนก่อน

    Great video, thanks for sharing.

  • @projectmayhem2330
    @projectmayhem2330 หลายเดือนก่อน

    How does the RimX compare to the 1913 for benchrest ?

    • @22rimfireultra67
      @22rimfireultra67 หลายเดือนก่อน

      Both excellent. It would be a tough decision. With the RimX set up with heavy long barrel, Bench trigger, bench stock and using a bench type front rest, I tend to get a few more 'X's' with the RimX. But the 1913 for me is more enjoyable to shoot. 😌

    • @projectmayhem2330
      @projectmayhem2330 หลายเดือนก่อน

      @@22rimfireultra67 that’s nuts, so a mag fed action is comparable or better than a dedicated Annie BR 🤯

    • @22rimfireultra67
      @22rimfireultra67 หลายเดือนก่อน

      @@projectmayhem2330 RimX is not an ordinary magazine fed action as you know. Each round chambered is near perfectly fed. And the Desert Precision Gunworks build (as described) takes the rig to a high level of precision. Then, there is the fact that I am a 'weekend' shooter.........about as far as one can get from the 'pro's'. So others results might be much different. 🤔

  • @edwardburrowes4243
    @edwardburrowes4243 หลายเดือนก่อน

    Hi I noticed you use different rifle front rests do you have a favorite?

  • @chrislang5659
    @chrislang5659 หลายเดือนก่อน

    I've got one upgrade I know of for my Rem.597 and that's the barrel. I've found one company, called "Jarvis" never seen one review. Scared to purchase it!😮 Still, I think I will. Who knows, it may be the greatest thing going!😅 Cool to see the upgrades your rifle has gone through!❤❤❤

  • @projectmayhem2330
    @projectmayhem2330 หลายเดือนก่อน

    There’s a 1913 SuperMatch for sale. I don’t know if I should buy it or get a custom BR build 🤔 he lives on the other side of the country, so I can’t test shoot it

    • @22rimfireultra67
      @22rimfireultra67 หลายเดือนก่อน

      Always choices! Best with your decision! 😅

  • @brian6697
    @brian6697 หลายเดือนก่อน

    Why not just pull out the spring all together ? Rifle functions perfectly fine without one in the rimfire versions of the rifle

  • @CountryRimfire
    @CountryRimfire หลายเดือนก่อน

    There are not a lot of differences in your rifle, actually? Not enough to completely change your shooting style for sure. Thanks for sharing this!! 👍

  • @rifflicks
    @rifflicks หลายเดือนก่อน

    that's a hell of a nice Vice you have those guns clamped into.....real talent

    • @22rimfireultra67
      @22rimfireultra67 หลายเดือนก่อน

      Randolph Machine a very precision rest.

    • @pinslayer4579
      @pinslayer4579 4 วันที่ผ่านมา

      ​@@22rimfireultra67Hardly a rest ......more or a turret actually. I'd have been more impressed if you lit the matches

  • @bfox87
    @bfox87 หลายเดือนก่อน

    Nice hows this compare to a 457? Someone recommend one of these today, saying that styer makes the barrel stock and tooling for most manufacturers. idk about all that but seems pretty good

  • @nopro5433
    @nopro5433 หลายเดือนก่อน

    Thanks for Sharing 👍🏻💀✌🏻

  • @briansmith3380
    @briansmith3380 หลายเดือนก่อน

    Extremely enjoyable video! The same carbine coming my way next week and the best days "shooting" were much like your walk in the woods. The terrain, the stream and certainly the stone work were amazing. Can't thank you enough for your sharing! (Finally found the right spot to leave my comment...got wrapped up looking at some of your other videos.) Thanks again!

    • @22rimfireultra67
      @22rimfireultra67 หลายเดือนก่อน

      It's a good nearby trail ! Best for your situation !!!

  • @timvest8141
    @timvest8141 หลายเดือนก่อน

    Good shootin. I just ordered a brick of Standard Plus.

  • @fredhinck9685
    @fredhinck9685 หลายเดือนก่อน

    Mine shoots Blazer very well. Since the Blazer is a rn bullet, I do a HP mod with my Waltz die. Makes for a great gopher gun.

  • @fishtoledo
    @fishtoledo หลายเดือนก่อน

    Next time use a gun that has recoil

    • @carlosugarte1450
      @carlosugarte1450 27 วันที่ผ่านมา

      The doorknob turners don't like the recoil......

  • @donaldanderson4139
    @donaldanderson4139 2 หลายเดือนก่อน

    Is that the factory stock? Doesn’t appear to be.

    • @22rimfireultra67
      @22rimfireultra67 2 หลายเดือนก่อน

      It is the factory stock.

  • @RimfireAddicted70
    @RimfireAddicted70 2 หลายเดือนก่อน

    Any thoughts on pillars or bedding it at this point? I know it's a debated issue with the lilja barrel about break in. Some show noticeable improvement right away (which I kinda would expect) and some have talked about the difference after "break in". Whether people believe in it or not I know most of the testing centers won't even accept a rifle barrel that has under 500 rds reason being it eliminates variable of change later. A couple big barrel makers say there is no need to break a barrel in but...but you may see improvements after XXX number of rounds and that number differs. On my custom builds I burned 1000 rds of CCi SV & SK Magazine before I started using Lapua. It's been debated on the forums some have done similar some haven't but the group who did seems to report less flyers overall. Not sure how this can be quantified or explained.

    • @22rimfireultra67
      @22rimfireultra67 2 หลายเดือนก่อน

      Yes, I have thought about bedding but need to get some extended time at the range to understand its potential first. I side with the camp who feel barrel 'fouling' can make a difference in accuracy. The theory is lead and lubrication running through the entire barrel (hence 750 -1000 rounds) eliminates at least some microscopic 'drag' on the soft lead 22LR bullet as it races to the muzzle end. I like to think of it as Teflon coating on a frying pan.

  • @1mccactus
    @1mccactus 2 หลายเดือนก่อน

    I would have been so tempted to nail that fly 😮, nice test, really impressed in the ammo and your shooting 😊

    • @22rimfireultra67
      @22rimfireultra67 2 หลายเดือนก่อน

      Yes, there was about 15 seconds of temptation to be sure!

  • @randyemenhiser2573
    @randyemenhiser2573 2 หลายเดือนก่อน

    Wth? Cat got your tongue?

  • @niteriderwm
    @niteriderwm 2 หลายเดือนก่อน

    We've discovered that slowr travelling bullets in the subsonic range made for better groups from 100 to 300 yards. My late buddies model 52 shot Centerx and Wolf match better than the faster CCI and Browning ammo that we used in our video of out to 300 yards.

  • @ibrahim10910
    @ibrahim10910 2 หลายเดือนก่อน

    What rifle did you use? Please share some info. Thanks.

    • @22rimfireultra67
      @22rimfireultra67 2 หลายเดือนก่อน

      Hmmmmm....I usually do not forget small things like the rifle used! Vudoo V22 Sinister in a WOOX stock.

  • @edwardburrowes4243
    @edwardburrowes4243 2 หลายเดือนก่อน

    Hi where can I purchase that little bullet tool that measures head space for Eley? Thanks

    • @22rimfireultra67
      @22rimfireultra67 2 หลายเดือนก่อน

      RavenEyeCustom.com and Clock Wise Tools on Amazon

    • @edwardburrowes4243
      @edwardburrowes4243 2 หลายเดือนก่อน

      @@22rimfireultra67 , thanks so much for the educational videos

  • @rwall1983
    @rwall1983 2 หลายเดือนก่อน

    I enjoy watching your channel. I have the same Jard trigger, Ely headspace setup on a pair of custom CZ 457 Lilja 21" & 24" Shilen barrels. Are you going to test the same Tuners from your previous videos to see how they perform with the 26" barrel? The tuner on my 24" rig is outstanding. For me cleaning the chamber every 100 rd to eliminate carbon ring & running several dry patches down the tube is a must with custom match chambers. The firing pin mod is really good. Keeping the bolt clean & replacing the extractor & spring clip when the FTE starts is necessary. The down side of the CZ finding spare parts.

    • @22rimfireultra67
      @22rimfireultra67 2 หลายเดือนก่อน

      Yes I most likely will test the tuner on this rifle in due time. I still need to determine its potential as is without a tuner. So far, I like how it feels in hand and the replaced and added components seem to 'fit' in well.

  • @CountryRimfire
    @CountryRimfire 2 หลายเดือนก่อน

    Super NIce Rifle! I must have missed the Lapua one 🧐😳 Gotta go back and find it. Nope I did see it haha 😂 Why is your scope out like that? I don't think I have ever seen that before 🥸🤓 I am very curious about this.

    • @22rimfireultra67
      @22rimfireultra67 2 หลายเดือนก่อน

      Some 'pro' bench rest shooters use this scope set up. With very low ounce trigger pull, and super steady positioning with front and rear BR gear, they require minimal physical contact with the rifle. Only contact is finger on the trigger and maybe (yes/no) ultra-light stabilizing or counter squeeze thumb on the stock . No cheek or shoulder contact. Therefore, there is no need to 'hover' over the rifle during firing which could influence accuracy. This 3/4" offset offers less chance of unwanted contact.

    • @CountryRimfire
      @CountryRimfire 2 หลายเดือนก่อน

      @@22rimfireultra67 ohh, that is very cool! Thank you for the great information. That all makes perfect sense. I may look into this and see what it would set me back. Thank you very much for the very informative reply!! 👍🙏

  • @RimfireAddicted70
    @RimfireAddicted70 2 หลายเดือนก่อน

    This is going to be an interesting project!!! 'm really looking forward to more videos as this moves along. Thanks for sharing.

    • @22rimfireultra67
      @22rimfireultra67 2 หลายเดือนก่อน

      Ammo testing in the Eley family most likely. May try tuner testing this summer as well.

  • @jackjill521
    @jackjill521 2 หลายเดือนก่อน

    What is the difference in the two chambers?

    • @22rimfireultra67
      @22rimfireultra67 2 หลายเดือนก่อน

      Excellent information on that question can be found on youtube channels such as 'Eagle Eye Shooting' and 'Pursuit of Accuracy', as well as the excellent book, 'Rimfire revolution'.

  • @audieladd2476
    @audieladd2476 2 หลายเดือนก่อน

    Dan Lilja will be very happy to hear that a standard CZ Barrel outshot not one, but two of his match grade barrels. I just ordered two CZ Varmints while they're still in stock and available. Please bring back the Anschutz 1710 DKL, we miss it 😢

    • @22rimfireultra67
      @22rimfireultra67 2 หลายเดือนก่อน

      I've just started with this project. Give me a bit more range time 😅

    • @audieladd2476
      @audieladd2476 2 หลายเดือนก่อน

      @@22rimfireultra67 It won't be a fair test because the CZ Varmint could probably do much better as well with a bit more range time. I'm buying my two standard CZ Varmint "Lilja Killers" and I'm not lookin back. 🥳🎉

    • @22rimfireultra67
      @22rimfireultra67 2 หลายเดือนก่อน

      @@audieladd2476 CZ 457 Varmint is hard to beat. No argument here 😅

  • @chrislang5659
    @chrislang5659 2 หลายเดือนก่อน

    Ridiculously accurate!❤❤❤

  • @HSmith-uk9hl
    @HSmith-uk9hl 2 หลายเดือนก่อน

    I believe that the Lapua you shot yesterday in the other rifle was better than the Eley rifle today. However, when you find what this one likes best, it may prove to be equal or better than the Lapua rifle. I think you'll have lots of fun finding out.

    • @22rimfireultra67
      @22rimfireultra67 2 หลายเดือนก่อน

      Yes, the Lapua chambered rifle grouped slightly better. That is good for my friend. His is the Lapua build. The Eley build being mine I have very high hopes and expectations that it will come around with fouling and ammo trials 🤔🙃

  • @bfox87
    @bfox87 2 หลายเดือนก่อน

    👍👍👌

  • @cw2a
    @cw2a 2 หลายเดือนก่อน

    ❤️‍🩹❤️‍🩹🙏❤️‍🩹❤️‍🩹