MinterVision
MinterVision
  • 41
  • 258 154
Intellitronix Digital Gauges Installation Guide - 1966 Mustang
In this video I install the DP7001w gauges from Intellitronix. This install covers how to customize and install the speed sending unit for a Tremec World Class T5.
Shoot a comment or a thumbs up if you liked this.
Gauges:
www.intellitronix.com/product-page/mustang-65-66-replacement-dash
12 Pin Harness:
www.ebay.com/itm/352804296912?var=622092624577
Bullet Connectors I used:
www.amazon.com/gp/product/B08H4SX5QG/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Music
=====
Track: "NCS: Feels Like Summer Mix"
Music provided by NoCopyrightSounds.
Watch more NCS on TH-cam: NCS.lnk.to/TH-camAT
Timeline
=======
Included Items - 0:00
Old Bezel Disassembly - 01:40
Modifying Stock Bezel - 04:18
Lens/Board/Wiring install - 05:11
Mustang Dash Wiring - Power - 07:32
Mustang Dash Wiring - Fuel- 08:56
Mustang Dash Wiring - Turn Signals - 10:15
Mustang Dash Wiring - Oil - 12:26
Mustang Dash Wiring - High Beam Indicator - 13:15
Mustang Dash Wiring - Temperature - 13:29
Mustang Dash Wiring - Dimmer - 14:03
Mustang Dash Wiring - E-Brake Indicator - 15:14
Sensor Installation - Temperature - 16:37
Sensor Installation - Oil - 18:29
Sensor Installation - Tachometer Wiring - 19:40
Sensor Installation - Speed Sending Unit - 22:35
Sensor Installation - Speed Sending Harness/Plug - 27:09
Testing Speedometer - 29:55
Speedometer Calibration for Non Stock Gears - 30:47
Final Assembly View - 32:35
Beauty Shots - 33:31
มุมมอง: 629

วีดีโอ

2015-2019 Nissan Versa HVAC Cable Repair/Replacement
มุมมอง 3.8K10 หลายเดือนก่อน
If you own a 2015 to 2019 Nissan Versa or Versa Note and you need to replace your HVAC module or repair a broken dial, this video is for you. Nissan changed the cable system in 2015 to where the cables can no longer be turned sideways to be removed. In this video, I show you the best method I have found for disconnecting the temperature, blend door and fresh air vent cables from the back of the...
Rebuilding a 1966 Mustang Restomod - Part 8 - TMI Center Console
มุมมอง 52010 หลายเดือนก่อน
In this video I install a TMI Center Console that I purchased from CJ Pony Parts. But it doesn't fit out of the box due to my Tremec World Class T5 and due to my center A/C vents. So lets get customizing! Shoot a comment or a thumbs up if you liked this. Music Song: AgusAlvarez - Good Summer Music provided by Vlog No Copyright Music. Video Link: bit.ly/3QRxVMA..
Old Air Products CAP-1065M-289 Hurricane Air Conditioning for 1965-1966 Mustangs - Part 2
มุมมอง 1.4K10 หลายเดือนก่อน
In part 6 of this VERY long over-due episode, I complete the installation of a CAP-1065M-289 complete A/C and Heat system from Old Air Products for 1964 to 1966 Mustangs. My apologies for the severe gap in getting part 2 uploaded. At the height of the real estate frenzy in 2022, my wife and I decided to sell our fully remodeled home and purchase a run down, but much larger house and plot of lan...
Motorcycle Hit And Run w/ Drunk Rider
มุมมอง 3202 ปีที่แล้ว
On 7/23/2022 at approximately 10:15 am, a rider traveling northbound on Davis Blvd in North Richland Hills lost control of his motorcycle causing it to slide over 200 feet through an intersection impacting a Toyota Camry in Lane #1. The rider then got up and walked to his bike, and with the assistance of concerned citizens was able to get the bike back up. He then proceeded to drive off without...
Old Air Products CAP-1065M-289 Hurricane Air Conditioning for 1965-1966 Mustangs - Part 1
มุมมอง 14K3 ปีที่แล้ว
In part 5 of this long over-due episode, I begin the installation of a CAP-1065M-289 complete A/C and Heat system from Old Air Products for 1964 to 1966 Mustangs. This is a 2-part series, despite heavy editing and timelapsing - the install is still quite lengthy....but oh so worth it. You can find the Hurricane Air Conditioning System and many more products at www.oldairproducts.com/ Stay tuned...
Rebuilding a 1966 Mustang Restomod - Part 4 - Custom Dash!
มุมมอง 4453 ปีที่แล้ว
In this video I fix one of the biggest problems my classic Mustang has in the interior - a scratched up and mangled dash. Shoot a comment or a thumbs up if you liked this. Music Harmony by Ikson soundcloud.com/ikson Music promoted by Audio Library th-cam.com/video/ytwb-xsfaIE/w-d-xo.html Moar Progressive House by Brenticus soundcloud.com/brenticus Creative Commons - Attribution 3.0 Unported- CC...
Rebuilding a 1966 Mustang Restomod - Part 3 - Big Changes!
มุมมอง 3974 ปีที่แล้ว
In this video I pick up a bunch of new parts from Summit Racing Equipment in Arlington, TX. One of which is installed - a new hood scoop for the Stang. I also clean up the engine bay a little more and Rhino-line it. Shoot a comment or a thumbs up if you liked this. Many more restoration videos are coming .... slowly. Music JPB - High [NCS Release] th-cam.com/video/Tv6WImqSuxA/w-d-xo.html soundc...
Rebuilding a 1966 Mustang Restomod - Part 2 - Tearing It Down
มุมมอง 6584 ปีที่แล้ว
In this video I tear out a lot of the engine bay components in preparation for new parts or repairs. I also remove the factory 1966 air conditioning system from the inside. Shoot a comment or a thumbs up if you liked this. Many more restoration videos are coming .... slowly. Music: Island by MBB soundcloud.com/mbbofficial Creative Commons - Attribution-ShareAlike 3.0 Unported- CC BY-SA 3.0 Free...
Rebuilding a 1966 Mustang Restomod - Part 1 - New Seats
มุมมอง 3K4 ปีที่แล้ว
Kind of a weird place to start - but I've been itching to get these new seats installed into my 1966 Mustang Restomod. They are out of a 2012 Mustang GT - so I can finally say the car is all Ford parts again (Cya Saturn!) Shoot a comment or a thumbs up if you liked this. Many more restoration videos are coming .... slowly. Music: Song: INOSSI - Kind Heart Music provided by Vlog No Copyright Mus...
2007-2013 Toyota Tundra LED Bulb Install/Modification - NO HYPERFLASH
มุมมอง 15K4 ปีที่แล้ว
If you are wanting to put LED turn signals in your 2007-2013 (2nd Generation) Toyota Tundra, you've come to the right video. This video documents how to modify your factory flasher unit to allow for LED bulbs to be installed without hyper flash. NOTE: This is to completely replace all 4 turn signals. You cannot do this mod and keep incandescent bulbs in the front or rear. ALL FOUR must be repla...
K&N Typhoon Installation for 2011-2016 Scion tC's
มุมมอง 21K4 ปีที่แล้ว
I meant to upload this a LONG time ago, but just never got around to editing it. I installed a K&N Typhoon "short ram" cold air intake into my 2014 Scion tC 10-Series. This was a preventative measure against future hydrolocks and to give the engine a bit throatier sound. All in all, after 8 months of having it installed, I couldn't be happier. If this video helped you or was enjoyable, just hit...
Rebuilding a 1966 Mustang Restomod - Coming Soon
มุมมอง 904 ปีที่แล้ว
12 years after restoring it the first time, it gets the proper restoration it deserves. Coming soon.
Rebuilding a 2014 Scion tC from CoPart - Part 7 - It's finished!!
มุมมอง 9654 ปีที่แล้ว
In this video we do paint and body work, install splash shields and fender liners, clean it up real nice and discuss total price to rebuild the car. Thanks to all who watched the series! This car was salvaged by an insurance company due to "Mechanical" damage. This video shows the starting process of removing minor engine and body components that will eventually lead up to the engine removal. T...
Rebuilding a 2014 Scion tC from CoPart - Part 6 - Reassembly and First Drive!!
มุมมอง 3764 ปีที่แล้ว
Rebuilding a 2014 Scion tC from CoPart - Part 6 - Reassembly and First Drive!!
Rebuilding a 2014 Scion tC from CoPart - Part 5 - H2Oh Snap - A HydroLocked Engine Finally Comes Out
มุมมอง 4254 ปีที่แล้ว
Rebuilding a 2014 Scion tC from CoPart - Part 5 - H2Oh Snap - A HydroLocked Engine Finally Comes Out
First Run in a 1966 Mustang after 302 Engine Swap
มุมมอง 1.7K4 ปีที่แล้ว
First Run in a 1966 Mustang after 302 Engine Swap
Rebuilding a 2014 Scion tC from CoPart - Part 4 - Time To Remove The Engine...Maybe?!
มุมมอง 1.1K4 ปีที่แล้ว
Rebuilding a 2014 Scion tC from CoPart - Part 4 - Time To Remove The Engine...Maybe?!
2003 - 2005 Cavalier/Cobalt - 2.2L Ecotec P0300 / P0171 Rough Running / Rough Idle Fix!!
มุมมอง 30K4 ปีที่แล้ว
2003 - 2005 Cavalier/Cobalt - 2.2L Ecotec P0300 / P0171 Rough Running / Rough Idle Fix!!
Rebuilding a 2014 Scion tC from CoPart - Part 3 - Ripping The Guts Out
มุมมอง 2774 ปีที่แล้ว
Rebuilding a 2014 Scion tC from CoPart - Part 3 - Ripping The Guts Out
Rebuilding a 2014 Scion tC from CoPart - Part 2 - Time To Disassemble
มุมมอง 4195 ปีที่แล้ว
Rebuilding a 2014 Scion tC from CoPart - Part 2 - Time To Disassemble
Rebuilding a 2014 Scion tC from CoPart for $2500! Learn the process of buying a salvage vehicle!
มุมมอง 9925 ปีที่แล้ว
Rebuilding a 2014 Scion tC from CoPart for $2500! Learn the process of buying a salvage vehicle!
2007 Toyota Tundra Dasaita 10.2” Android Head Unit Review
มุมมอง 13K5 ปีที่แล้ว
2007 Toyota Tundra Dasaita 10.2” Android Head Unit Review
1995 - 2005 Chevrolet Cavalier DashSkin Installation
มุมมอง 26K6 ปีที่แล้ว
1995 - 2005 Chevrolet Cavalier DashSkin Installation
MFSG - August 2017
มุมมอง 967 ปีที่แล้ว
MFSG - August 2017
2016 Snake Eater - Jonestown, TX - Magfed Only Event
มุมมอง 9628 ปีที่แล้ว
2016 Snake Eater - Jonestown, TX - Magfed Only Event
Texas Magfed - June MFSG - 2016
มุมมอง 1028 ปีที่แล้ว
Texas Magfed - June MFSG - 2016
Texas Magfed - MFSG April - 2016
มุมมอง 2348 ปีที่แล้ว
Texas Magfed - MFSG April - 2016
Operation Endwar: Texas - First Blue Mission - FAILURE
มุมมอง 1818 ปีที่แล้ว
Operation Endwar: Texas - First Blue Mission - FAILURE
Texas Magfed - February MFSG - 2016
มุมมอง 3878 ปีที่แล้ว
Texas Magfed - February MFSG - 2016

ความคิดเห็น

  • @famousj6
    @famousj6 16 ชั่วโมงที่ผ่านมา

    This video has revealed at least two unbelievably specific pain points that you'd have no way of knowing unless you attempted it yourself. Excellent! Thank you very much.

    • @minter66
      @minter66 15 ชั่วโมงที่ผ่านมา

      That’s why I decided to document the process for others. I appreciate the feedback.

  • @tonytempleton4788
    @tonytempleton4788 9 วันที่ผ่านมา

    Thank you really helped

  • @TheToxiclows
    @TheToxiclows 22 วันที่ผ่านมา

    good video thanks for the tip. as an indi tech it is hard to know everything about everything. nice to see a vid while working on something new thanks . :)

  • @toyotabrony
    @toyotabrony หลายเดือนก่อน

    I know this was few years ago. But the sylvania zevo are an excellent led bulb upgrades. Not the brightest but its design to increase the reliability and longevity.

  • @toyotabrony
    @toyotabrony หลายเดือนก่อน

    I know this was few years ago. But the sylvania zevo are an excellent led bulb upgrades. Not the brightest but its design to increase the reliability and longevity.

  • @Wes_5kyph1
    @Wes_5kyph1 หลายเดือนก่อน

    Ha, I have the exact year and color Scion tc as yours although mine is manual transmission. Bought it at 200k, replaced gearbox at 300k. Now I'm having the engine replaced with a used Rav4 engine as well. (replacement due to oil pump failure and engine was burning a lot of oil at 315k miles anyway). I will save this to watch later. I just went through your thread on the scion form. Thanks!

    • @minter66
      @minter66 หลายเดือนก่อน

      @@Wes_5kyph1 315,000 miles is incredible! Congratulations on getting to that milestone. I hope the videos help. There wasn’t any information at the time on engine replacement for these cars, so that’s why I made the video series. Good luck !

    • @Wes_5kyph1
      @Wes_5kyph1 หลายเดือนก่อน

      @@minter66 How's your tC doing now? Do you still have it? Mileage? and any issues?

    • @minter66
      @minter66 หลายเดือนก่อน

      @@Wes_5kyph1 Almost 137,000 miles. Zero issues. I’m amazed I didn’t screw anything up, I was for sure something would have manifested by now. Ended up putting on the TRD springs, TRD strut bar, TRD exhaust and a Dezod Green high flow cat to squeeze out some additional horsepower

    • @Wes_5kyph1
      @Wes_5kyph1 หลายเดือนก่อน

      @@minter66 nice. I'm a tad worried now how in your thread you said the rav4 engine has a bigger intake manifold than than the tc? would it have been possible to put the tc intake manifold on the rav4 engine to get it to fit?

    • @minter66
      @minter66 หลายเดือนก่อน

      @@Wes_5kyph1 That's exactly what you do. I swapped the intake from the hydrolocked engine over to the replacement RAV4 engine and it fit perfectly.

  • @BradArringtonBoating
    @BradArringtonBoating หลายเดือนก่อน

    Very nice set of videos. How are you finding the performance of the system? I was right into the system as a replacement for a failed AC-only under dash system until your comment about not being a "blend" system, so you can't have medium heat or medium cool. How do you regular the temps? Often I use heat+AC to defrost/defog the front window in winter, so wondering how your system performs.

    • @minter66
      @minter66 หลายเดือนก่อน

      @@BradArringtonBoating Thanks for the feedback. As far as performance, It was about 105 outside and I was sitting in the car comfortably at idle. Just turning the fan speed down in combination with hot outside temps “evens” it out and is not overpowered. I haven’t used it as defrost/defog so no feedback there. From the original dash system to this, I’m in LOVE with this system. Higher CFM and more evenly distributed air.

    • @BradArringtonBoating
      @BradArringtonBoating หลายเดือนก่อน

      @@minter66 Thanks! We have a 66 with a 5.0 from a Fox body and an aftermarket under dash AC that has plugged refrigerant lines, and the heater fan needs attention. The heater core lines are exceptionally difficult to attach to the stock heater core so this might be killing 3 birds with 1 stone.

  • @omaracosta4176
    @omaracosta4176 หลายเดือนก่อน

    Question on the fuel gauge, I've ran a new wire from the fuel sending unit to the yellow wire for the fuel gauge but its still not reading the fuel level, is there any other problem that can cause gauge not to read?

    • @minter66
      @minter66 หลายเดือนก่อน

      @@omaracosta4176 two possible reasons: 1) Your fuel float sank in the tank. Mine was bronze and it developed tiny holes due to the ethanol and filled up. I went with a plastic one and my gauge reads fine now 2) My gauge was defective from the factory. I had to send it in to be repaired. When you remove your fuel sending unit to check your float, ground it and hook it up to your fuel gauge and move the arm up and down to simulate different ohms of resistance to see if the gauge responds.

    • @omaracosta4176
      @omaracosta4176 หลายเดือนก่อน

      Thanks much appreciated boss

  • @seoexpertsm2
    @seoexpertsm2 2 หลายเดือนก่อน

    Hello, I checked out the content on your TH-cam channel. Your channel's content is amazing. However, there are several issues with your channel, one of which is SEO optimization. None of your videos are SEO-optimized. If your channel is properly optimized for SEO, it will go viral quickly. Along with that, you will gain a lot of subscribers, and your channel will become eligible for monetization. I can give you a free consultation on this matter if you'd like. Thanks & Regards, Sagor Hossain.

  • @LilmanJohnson-ru3sv
    @LilmanJohnson-ru3sv 2 หลายเดือนก่อน

    I'm need the same thing you got for my car two door cavalier

  • @LilmanJohnson-ru3sv
    @LilmanJohnson-ru3sv 2 หลายเดือนก่อน

    I'm need the same thing you got for my car two door cavalier

  • @LilmanJohnson-ru3sv
    @LilmanJohnson-ru3sv 2 หลายเดือนก่อน

    I'm need the same thing you got for my car two door cavalier

  • @branvan3984
    @branvan3984 2 หลายเดือนก่อน

    How does it track mileage?

    • @minter66
      @minter66 2 หลายเดือนก่อน

      @@branvan3984 It measures pulses that I calibrated in setup. It has a normal odometer for total miles and trip odometer for filling up

    • @branvan3984
      @branvan3984 2 หลายเดือนก่อน

      @@minter66 Im sorry, i ment how do you view it. I thought mileage was displayed where you have the tac numbers shown. Do you just click that button to cycle it over to miles? I havent installed mine yet, but was unaware it had a tac.

    • @minter66
      @minter66 2 หลายเดือนก่อน

      @@branvan3984 my apologies for misunderstanding your question, you are correct, and you can just click the button into various modes. One is tachometer, one shows trip, one shows full odometer

  • @shadwills8594
    @shadwills8594 2 หลายเดือนก่อน

    Thank you so much. I'm considering this unit for my '61 Falcon. And now I have a much better idea of how I can get it to fit. Awesome. Very detailed.

    • @minter66
      @minter66 2 หลายเดือนก่อน

      @@shadwills8594 Thank you for the feedback. I was worried this was entirely too long. Check out part 2 as it deals with the heater core valve and cabling

  • @nicksoto4208
    @nicksoto4208 3 หลายเดือนก่อน

    If you do break the tabs on one, can’t you just find a way to hold that cable in place so that it doesn’t move?

    • @minter66
      @minter66 3 หลายเดือนก่อน

      @@nicksoto4208 possibly - you have to remember that there is a cable inside the sheath and if you secure it using zip ties or other methods like that, you could tighten it down to where the internal cable can’t move.

  • @tacowithahat9625
    @tacowithahat9625 3 หลายเดือนก่อน

    that red light is your high beam indicator

    • @minter66
      @minter66 3 หลายเดือนก่อน

      @@tacowithahat9625 I have a blue LED for high beam.

  • @christopherfung1618
    @christopherfung1618 3 หลายเดือนก่อน

    Did it turn any lights on in the car

    • @minter66
      @minter66 3 หลายเดือนก่อน

      @@christopherfung1618 no check engine lights

    • @christopherfung1618
      @christopherfung1618 3 หลายเดือนก่อน

      Was there any decrease in gas mileage or any increase in temperature in the engine

    • @minter66
      @minter66 3 หลายเดือนก่อน

      @@christopherfung1618 I do not know about engine temp, as I don’t have a temp gauge on my dash. Mpg actually improved. I got 29 the other day with mixed city/highway

  • @sceames04
    @sceames04 4 หลายเดือนก่อน

    Solid advice it worked like a charm. Thanks Boss

  • @rekaraswad288
    @rekaraswad288 4 หลายเดือนก่อน

    Thanx

  • @robertwalden9962
    @robertwalden9962 5 หลายเดือนก่อน

    Your videos have been very helpful while installing my kit into my 1960 Cadillac! I am about ready to charge it in the next couple of days. Just curious, have you had a chance to see how the unit performs in your car yet?

    • @minter66
      @minter66 5 หลายเดือนก่อน

      Thank you for the positive feedback, that’s mainly the reason why I created these videos, because I couldn’t find any other documentation on installation. My unit performs very well, if you look at the TH-cam short I made, in the garage at idle it was at 35°. I have not been able to test this in a real world scenario because the car is still somewhat apart and illegal to drive as it is.

  • @kellygibson4653
    @kellygibson4653 5 หลายเดือนก่อน

    You put legit effort into this video to make a quality tutorial. Extra props for using Milwaukee cordless tools. Subbed and voted! Thanks!

    • @minter66
      @minter66 5 หลายเดือนก่อน

      Thanks for the sub!

    • @kellygibson4653
      @kellygibson4653 5 หลายเดือนก่อน

      @@minter66 Welcome!

  • @chadhendrix6026
    @chadhendrix6026 5 หลายเดือนก่อน

    I’m about 80% into my 65 mustang restoration. After watching your video, even though this would be the perfect time to do it, I don’t think I have it in me to add this project. That is quite a job and it looks great! That’s just going to have to come later! LOL

    • @minter66
      @minter66 5 หลายเดือนก่อน

      That’s the best part of this kit, very minimal “modification”. It is a good amount of work but oh so worth it. This is my second restoration of this car. I originally restored it back in 2008, but the original A/C was just terrible

  • @jasonsparks1726
    @jasonsparks1726 6 หลายเดือนก่อน

    I just did this to my 2010 sequoia black colored signal flasher with part number 81980-0C010. it did not work.

    • @minter66
      @minter66 5 หลายเดือนก่อน

      What was the result?

  • @metlhead1478
    @metlhead1478 6 หลายเดือนก่อน

    Thank you so much . Currently installing an Old Air kit on my 72 Chevy C10 and this is the most in depth install I have found. I originally thought "Oh this is for a Mustang" but it's nearly identical to my kit. You have helped me immensely and gained a new subscriber in the process. Keep on keeping on brother.

    • @minter66
      @minter66 5 หลายเดือนก่อน

      Glad it helped!

  • @roymilla6636
    @roymilla6636 6 หลายเดือนก่อน

    It sounds grunty i like it

  • @Mike-sh2dg
    @Mike-sh2dg 6 หลายเดือนก่อน

    Did you loose foot room on the passenger side? It looks like the new heat/ac box hangs down more than the factory set up.

    • @minter66
      @minter66 6 หลายเดือนก่อน

      Not any noticeable amount. I’ve sat on the passenger side and at 6’ 2” can still sit comfortably. The old heater box took slightly less space.

    • @Mike-sh2dg
      @Mike-sh2dg 6 หลายเดือนก่อน

      Nice. After watching your video I’m thinking about buying this kit. I like the simplicity. The ecu vintage air uses makes me nervous. Now that the weather has warmed up have had a chance to use it?

    • @minter66
      @minter66 6 หลายเดือนก่อน

      @@Mike-sh2dg not yet, my gauge cluster is out for repair

  • @El_Basically_210
    @El_Basically_210 7 หลายเดือนก่อน

    So on my 2013 tundra I only swapped out the front headlight for new already assembled projector leds and ol & behold the thing gave me hyper flash. My rear lights are still stock so now I’m wondering what I can do to fix the hyper flash while still keeping the stock rear headlights?

    • @minter66
      @minter66 6 หลายเดือนก่อน

      Hyper flash is an indication that there is not enough resistance to slow down the LED bulbs. Since you’re only switching to LEDs on the front, you may have reduced the flasher unit too much, you need to increase the ohms resistance.

  • @reaganthrash5012
    @reaganthrash5012 7 หลายเดือนก่อน

    I have one too and my dial is broken

  • @Trayc59
    @Trayc59 8 หลายเดือนก่อน

    Worked great, just remember the resisters have to be soldered in one direction. If your blinkers don't work or maybe just the left works then take our the relay unsolder the resister and turn it around!

    • @tylerschmeling4537
      @tylerschmeling4537 3 หลายเดือนก่อน

      That’s not true. Resistors are not directional

  • @420MARES420
    @420MARES420 8 หลายเดือนก่อน

    Thank you for this video i cant find anything on this anywhere. Do you know how i can order a new one same exact piece you have?

    • @420MARES420
      @420MARES420 8 หลายเดือนก่อน

      And to be honest i don’t even know the exact name of the part to try and look for it 😢

    • @minter66
      @minter66 8 หลายเดือนก่อน

      @@420MARES420 The part I used the knob from is a Versa AC Heat Climate Control Module Part: 27510-00C31 I bought mine from a Pick-N-Pull and it came out of a 2014 Versa Sedan. It was $29.99 plus tax

    • @420MARES420
      @420MARES420 8 หลายเดือนก่อน

      Thank you!!!

  • @Grateful-Blessed
    @Grateful-Blessed 9 หลายเดือนก่อน

    I bought a front re-lace men’s t part but there are no hole to put bolts in to secure new front? What todo I do? As the old is in pieces🤷🏻‍♀️🤦🏻‍♀️

    • @minter66
      @minter66 9 หลายเดือนก่อน

      Are you using the dashskin product?

  • @theodorev4611
    @theodorev4611 9 หลายเดือนก่อน

    P r o m o s m

  • @jarlee09
    @jarlee09 10 หลายเดือนก่อน

    how do you tell how fast you are going?

    • @minter66
      @minter66 10 หลายเดือนก่อน

      Currently I am working on upgrading my gauges (which is why they are missing in this video) I’ll have a how to/install video for my Intellitronix gauges hopefully in the next month or so.

  • @frieselu
    @frieselu 11 หลายเดือนก่อน

    This also worked for me on my 2008 Tundra. HOWEVER don't make the same mistake I did at first, which was to buy the wrong resistors on Amazon. Even though I typed in "0.15 OHM resistor", it took me to 15 OHM resistors, which I bought without noticing. I soldered them in and no dice. Super frustrated. Then as I was troubleshooting I realized my error on the buy. I bought the correct 0.15 OHM resistors that the OP linked to, and those worked great! Thanks for the walkthrough!

  • @TheLilkhmaikid81
    @TheLilkhmaikid81 ปีที่แล้ว

    I did this, and it works great for turning signals, but when I went and got my truck washed, and the worker turned on the emergency lights on as my 07 tundra was going through automatic car wash. After sometimes, the emergency lights stuck in turning on position without blinking. I then have to turn the emergency off to used the turn signal normally again. Is that going to happen when using emergency lights?

    • @minter66
      @minter66 ปีที่แล้ว

      I would almost think that having all 4 signals going at once generated too much heat or the resistance was too high for the modification. I am able to use my 4 ways for extended amounts of time (loading/unloading) so not sure what would cause this.

    • @dirk41nowitzki41fan
      @dirk41nowitzki41fan 9 หลายเดือนก่อน

      To my understanding, the hazard lights operate on a different circuit, so they should be unaffected, but I could be wrong. On the other hand, the resistance on the circuit may be slightly too high. Bear in mind, resistance changes with heat. Lower resistance makes blinking faster. Higher resistance makes blinking slower. If resistance is too high, your lights might not blink at all.

  • @spicythai2000
    @spicythai2000 ปีที่แล้ว

    Thanks for the informations. I actually bought a LED relay. So I will be installing it.

    • @minter66
      @minter66 ปีที่แล้ว

      A plug and play unit?

    • @spicythai2000
      @spicythai2000 ปีที่แล้ว

      @minter66 yes it is.

    • @minter66
      @minter66 ปีที่แล้ว

      @@spicythai2000 can you post a link to it?

    • @spicythai2000
      @spicythai2000 ปีที่แล้ว

      @minter66 the relay does not fit the connector. I got this from Amazon.

    • @maldonadoapolinar
      @maldonadoapolinar 6 หลายเดือนก่อน

      Any link?

  • @hellokittybites95
    @hellokittybites95 ปีที่แล้ว

    Where did you buy the engine cover or did you already have it?

    • @minter66
      @minter66 ปีที่แล้ว

      It came on the replacement engine. But you just need to look for the Toyota RAV4 engine cover

    • @hellokittybites95
      @hellokittybites95 ปีที่แล้ว

      ​@minter66 what year would fit?

    • @minter66
      @minter66 ปีที่แล้ว

      @@hellokittybites95 2013+

  • @IwillmuteyouGOTIT
    @IwillmuteyouGOTIT ปีที่แล้ว

    Now its get hot air under engine compartment and more dust to the engine

    • @minter66
      @minter66 ปีที่แล้ว

      So if you took the time to watch any of my other videos, you’d know that the previous owner hydro locked the engine due to the stock intake ingesting water that was only a few inches high. This prevents that. And what dust? Not doing the Oregon trail here.

    • @IwillmuteyouGOTIT
      @IwillmuteyouGOTIT ปีที่แล้ว

      @@minter66 if you love run in to deep water, just move ( modified the snorkel up higher) still mess up the catalytic converter though. K &N filter nothing. Dust can make it through then will effect the mas sensor

    • @o8_tOAstEr_xB
      @o8_tOAstEr_xB 8 หลายเดือนก่อน

      @@minter66is it Calfornia legal? Will it fit 2008 Scion xB?

    • @minter66
      @minter66 8 หลายเดือนก่อน

      @@o8_tOAstEr_xB sorry , not CARB legal. And made for the 2.5L engine, which isn’t in the 2008

  • @bj42alberta
    @bj42alberta ปีที่แล้ว

    I used 0.22ohm resistors. I removed the existing factory resistors and soldered mine directly to the board. I have LUYED led bulbs all around, and the fix worked perfectly. Thank you!

  • @JustinSwensen-x3c
    @JustinSwensen-x3c ปีที่แล้ว

    Does it matter how many watts it is? Or any .15 ohm will work?

    • @toyotabrony
      @toyotabrony หลายเดือนก่อน

      It does if u care more wattage means more brightness means lower lifespan.

  • @JustinSwensen-x3c
    @JustinSwensen-x3c ปีที่แล้ว

    Does it matter how many watts it is? Or any .15 ohm will work?

  • @stevew8095
    @stevew8095 ปีที่แล้ว

    How much does it weigh?

    • @minter66
      @minter66 ปีที่แล้ว

      The actual DashSkin is super light. Can’t be more than a couple of pounds

  • @toyota-hunter
    @toyota-hunter ปีที่แล้ว

    Hey man, I'm doing research for my manual swap to start next year. Do you still have this car?

    • @minter66
      @minter66 ปีที่แล้ว

      I do, still drive it every day. I have 126,000 miles on it now

    • @toyota-hunter
      @toyota-hunter ปีที่แล้ว

      @@minter66 Awesome! I'm going to acquire a manual of the same year from Copart next year and document the process of manual swapping this car. Read your forum post and there's a lot of good information there. Thanks!

  • @tstan6767
    @tstan6767 ปีที่แล้ว

    Does the passenger side fresh air vent really need to be capped? It looked as though there was enough room to keep it with the heater/evap box in place. Thanks!

    • @minter66
      @minter66 10 หลายเดือนก่อน

      Oh you definitely can keep it uncapped. If yours is still in functioning condition and doesn't let outside air in when closed, leave it be. Mine was rusty and hard to move, so I just capped it.

  • @jauschuastout5600
    @jauschuastout5600 ปีที่แล้ว

    Great video! I was thinking of doing something similar. How has the vinyl held up over time? Anything you would do differently?

    • @minter66
      @minter66 ปีที่แล้ว

      So far it hasn’t loosened or peeled. Two hot summers in a garage that easily gets over 100*F. If I were to do anything different, it would have been the caulk. Instead of using a wet finger, I wish I had used a wet plastic blade to make the caulk more flat/uniform. If you stare at it closely enough, you can see minor waves where the caulk dried in the center. But most people probably wouldn’t notice, and my phone will be there when driving.

  • @emersontayten
    @emersontayten ปีที่แล้ว

    Adhere Thanks for this video dude. Finally getting ready to purchase this or the classic auto hvac. I appreciate you

  • @Tripped417
    @Tripped417 ปีที่แล้ว

    Question. The does center vertical slide (temp) do anything. I can’t see how it is connected to anything

    • @minter66
      @minter66 ปีที่แล้ว

      The temp slider doesn’t do anything now. Just there for appearance purposes. The left most slider is what controls temperature on heat only, it adjusts how much coolant enters with the heater valve. The A/C system is not a blend system, so you can’t adjust it. It’s either on/cold or off. My thinking is if I get cold, aim vents away or turn the fan down.

  • @Outdoor-Adventures
    @Outdoor-Adventures ปีที่แล้ว

    Does this same technique works for 2020 Tundra?

    • @minter66
      @minter66 ปีที่แล้ว

      I cautiously say yes, only because from 2007-2021, Toyota pretty much didn’t change the Tundra except cosmetically. I would image the electrical locations and functions remained the same.

  • @KDFRxpo2
    @KDFRxpo2 ปีที่แล้ว

    I think I screwed the pouch here. 🤦🏼‍♂️installed the 0.15 ohm resistors on the existing factory resistors. Everything works fine but NO power to left rear tail light. Any help would be greatly appreciated 🥴

    • @minter66
      @minter66 ปีที่แล้ว

      Remove the resistors and see if you regain flasher functionality. There may be so much resistance it cannot power on.

    • @KDFRxpo2
      @KDFRxpo2 ปีที่แล้ว

      @@minter66 Thank you min. It’s strange. Right turn signals and emergency flashers work perfectly well on the right side of the truck. The only lamps not responding is left rear. Flash rate is fine 1 per second. I think I damaged the factory relay circuit board I guess? I’m out $60.00 bucks. 🤦🏼‍♂️ I bought a few dozen 0.15 ohm resisters too. If anyone needs any I’ll send them to you.

  • @dewaynehall7104
    @dewaynehall7104 ปีที่แล้ว

    Nice ride I live in irving tx in a few years I'm looking to get a 65 or 67 mustang coupe maybe I'll get lucky and find one in irving like you did