วีดีโอ

Talking of bass: I have testing two Wharfedale AX12-BT for a couple of weeks and I think that bass would be a little better, specially for a 12" cone. My impression is the built-in "Punch" mode increases the spectrum of frequencies near 120hz, but I would have liked something closer to 80Hz. Anyway, clearly this product was designed with the use of T-Sub AX15B unit in mind, so it's okay. In summary, I think this speaker is very good. Specially it have very good mids and highs; better than JBL IRX 112BT that have I tested directly against it, which pleasantly surprised me.

I have been using Serato DJ pro for years now thats why

Would this work with serato pro and phase

People complaining about the fee is just ridiculous!! The "free" software updates are not actually free. You pay for it with your recurring subscription or a hefty once-off charge. 9.99 is to cover the z-plane licensing cost. That cost enables 4 devices which, as a once-off charge is actually a great deal. Playback of stems on the desktop software will probably also have some licensing to deal with, which I suspect is why it's not available yet. Engine Desktop - "hot garbage" is just plain wrong. If you're struggling to export you need to talk to DenonDj directly. I have a library of about 800gb's & 3 back-up drives with no issues exporting at all. Analyse 50 tracks in Rekordbox, then those same tracks in Engine... it will take half the time of rekordbox & the grid will be more accurate. Browsing & streaming music wirelessly from Engine desktop to your device is another great feature that works very well. It also integrates directly with Soundswitch lighting software & now offers stem separation - What does Rekordbox offer that makes it so great? Bluetooth is notorious for having latency, which is undesirable in the dj world. You are asking for a very niche app that will probably just end up having people diss it for poor performance due to latency, but they do have a feature request section on the forum. No harm in officially asking for it there, DenonDj are very good at delivering features requests.

does mixer have the blutooths?

Hey bud is this and the cort g250 se same ? I'm planning to buy one shall I go for it?

You will spend more time preparing your music than DJing you are losing money

You are so right

Hi, I'm so glad I found your channel you have some great videos and interesting content. Speaking of subwoofers can I get your advice or thoughts? I'm looking to purchase a single Subwoofer. I'm trying to get something with some power that I can afford. What is your opinion or do you think about the Alto Professional TS12S - 2500W 12-inch Subwoofer, Powered PA Speaker with 6 Selectable DSP Modes, 130 dB, 3" Voice Coil?

As Akai also charged $9.99 for the stem separation on MPCs, and that was licensed from zplane, it's likely the same deal with Denon (both Akai and Denon being part of inMusic).

In terms of # of devices, the $9.99 one time price will cover up to four (4) pieces of Engine compatible hardware, i.e. Denon Prime 4+, Numark Mixstream, etc. Stems are available on the Prime 4+ right now, with compatibility for all other hardware coming on 12/11/24. I’ve got a pair of SC5000Ms and a Prime Go, so that $9.99 will have me covered. Quality samples I’ve heard have been pretty damn good. Not as good as say the LALAL-AI site that I utilize frequently, but definitely (much!) better than the recently launched stems for Akai MPCs in standalone mode, which is also a one time $9.99 add on. Great video. Thanks!

They need to put stronger processors like they have on our iPhones cuz my iPhone 12 mini can handle stems🤷🏾‍♂️

Basically a work around 🤷🏾‍♂️

I believe your hardware has to be registered with InMusic for it to work. Not sure if I'm 100 on that.

I really do not understand what people are talking about when using wifi issues and Soundcraft in the same sentence. The range, sure. But having it with you on the stage creatures zero issues. I am leaning on believing that all those are operator error or unrealistic expectations. With Behringer XR the situation exactly the opposite, that thing simply does not work.

Typical amperage use is 1.75 A(210VA @ 120V) while max is 3.67A (440VA @ 120V). Assuming the PSA1S would be combined to 2 x PS12P (1.6A/each), the rig draws a max of 6.87A. Still another 5A to spare for the mixer, minimum lightning (LED) and computer. All from a single 15A circuit (80% (12A) for more than 3 hrs). It is heavy though! lol Thanks for the review.

The number one problem that happens with just about anything, mixer, television, microphones whatever when it comes to power supplies IS THE INTERNAL POWER SUPPLY THEY ALWAYS GO BECAUSE OF THE ELECTRICITY VARIATION AND SURGES. I don't know how many times I've lost mixers because the internal power supply gets ruined because of this then you're screwed. I love EXTERNAL POWER SUPPLIES they are usually the first thing that go and it also makes it so the unit is not as bulky.. So with that I totally disagree.. not to mention internal power supplies cause more heat inside the unit which causes more dust to be attracted to the internal parts which can also make them go So definitely no go for internal power supplies external all the way!! Not to mention you can find third party power supplies anywhere and you always will be able to... And super cheap

curious if there was a reason they couldn't use the open source demucs model, it's MIT licensed.

i've only got about 45 gigs of music, but doesn't seem like syncing takes very long on a fresh card/thumb drive?

useless video, I'm buying more lasers so I'll be the cooler-looking DJ.

Solid Review, thanks! Do you have any experience with the Peavey XR-S?

Why would Yamaha only provide 1 output for each side/amplifier? If I am running 2 main monitors up front (L+R) and 1 monitor in the rear for the drummer (Aux 1), those Yamaha SM15V 8ohm monitors up front become 16ohm since you have to run them in a series....so the stated 460w at 8ohm (in the Yamaha spec sheet) becomes something far less, with two large monitors to push. This is a major deal breaker if that is the case.

sweet this is dope! do u know if Im allowed to dj with turtle beach headphone that are intended for gaming? will it blow up? I have most this stuffs in the video already bro I have pevey 250watts rms mixing amp with properly rated rockville passive 400wrms 12s and a powered 12sub by alto and another powered 12 sub from rockville also how do you do the sub from the amp head without having to manually control the sub every time you change the volume it works fine its just anoying

Hi. Is there.too.much difference between this one and the earlier model?

TOO

What about Mackie?

I’ve had a Yamaha EMX5014c since 2008. I love it.

I have a 2016 Godin Session SG RN with the Black Burst finish and OMFG, what an axe it is! I have ZERO interest in buying another guitar that isn't one of my two grails. It's THAT good! It's actually my second Godin because I also have a Solidac. However, the Session is more my style because it's much lighter with a much more slender neck. The Solidac is a beast but it's a big single-cut LP-style body made of solid Silver Maple and has a chunky mahogany neck. Don't get me wrong, I love my Solidac but I ADORE my Session!

May I ask you a questions, please?

Can wharfedale speakers Bluetooth paired together

i was considering a stratlike budget friendly guitar, i think ive made up my mind thanks man

Does the 31 band eq of the main out effects the recording?

USB Type-C port does NOT imply higher speed sata rate. Nor will ir automagically use PD or QC Chargers. Neither of which The Manufacturer's site claims, so QUIT SHILLING CRAP THAT DOES NOT DO WHAT YOU SAY.

still have mine as a backup. only mic issues and lack of pads stop me using it as my daily driver. so sad they no longer put decent mic support on modern controllers onless you spend a fortune, making you buy a second mixer. a lot of us djs still do actually speak.

my main issue is its sooooooo slow to export to sd card or usb stick

To automatically relocate all missing files: 1. In the track list, right-click on any missing track and select Auto Relocate All. 2. Engine DJ will begin scanning your Desktop, Music and Documents folders, and all connected drives (including Dropbox, if connected) for the missing tracks. Tracks will be scanned by file name first, followed by length if there are multiple file name matches. 3. If file matches are found, Engine DJ will update tracks the same as above. Any files that do not match in name and length will remain missing. If multiple matches are found, Auto Relocate will not select one and the track will remain missing

Like your video, can i run the speakers straight to the amp without an external crossover like a dbx ?

Hello, I've got titan 12d, few years old... And they're OK.. How does the taurus 12 compare to the titan.. Or should I be going up to the typhon 12

I’m buying this soon just because it has 4 aux send

Thanks for sharing your video! Can the vocals be converted from male to female? I am an aspiring DJ very beginner stages researching the various DAW features! STEM separation is RAD and the fact that each part can be converted to midi for further manipulation is chido!❤ Cheers 🍻

2 volume knob is very usefull if you are doing karaoke. 1 for music and the other for mic to balance the vocals.

Do you still have it? Does it still work? Have you had any problems with it?

Wow, you need to use a graphic EQ to bring down yout highs in this video---- before our eardrums start piercing, it is so harsh. Why promote a product -- instead of using it where it's needed?

This is, of course, a RACK-MOUNT EQUIPMENT. With the power switch being on its BACKSIDE. Instead of on the front panel. Got it? How stupid is that, you think?

Try the bietrun bramd amd save a lot of money on batteries

I see that you are rocking a Tascam DM-4800. Same here and loving it. Thank you for sharing

Waves LV1 or this one for live performance?

Hi, i noticed my yamaha mg12fxf has a very loud output compared to my other mixers. I tend to put the gain and fader volume so low. Is that normal? Doni have a deffeftive mixer? Thanks!

Great value for the money!. They are sort of disposable tech, though. The caps eventually go making for a loud noise floor. It would take quite an effort to replace them.

We bought a wharfedale typhoon Ax12. Bt and the top an power is indicating that it is on but when mic and every thing Is on the sound is off. What can be done.