วีดีโอ

Considering the bore hole is the standard size on the Grisham door, then it should work in most any application.

Yes, you can remove the glass panels. Absolutely no concern for out of square. Welded solid at all points....

We do have available a 36" x 54 tall unit. That would give you roughly 6 inches to split between the upper and lower section of the window bar. Here`s a link to the unit: www.homedepot.com/p/Grisham-36-in-x-54-in-Spear-Point-Window-Bar-Guard-WB3654BK/202770089 Thank You, Grisham Bros.

In a few cases the entry door locks might come in contact with the security doors lockbox which is factory positioned to avoid contact with the entry door lock. In this case the entry door bore holes may have been bored out by the owner of the home and not positioned at the standard conventional factory pre-drilled locations. Using the European style handles help in clearance issues. Hope this helps. Thank You, Grisham Bros.

Thank you yes that answers my question that your bore location takes into consideration the existing door in my case on my house. I am installing this 501 door. They are standard factory bores. I was just curious when I saw the deadbolt being installed on the bottom I would like to do a picture handle and was concerned with the knob colliding but if they are offset, I think I will be fine thank you

@@grishambros7662 do you have a dimension from bottom or top of door to center of holes? On Genesis 501

Not flat Head screws. Specially designed non-Reversing safety screws.

The installation screws are non-reversing and would require the use of specialty tools to do so. Flat head screwdriver would be on no use.

I get it. Thanks grisham bros.

Remember, take into consideration the interior concealed screws as well. It’s always advisable to secure the brickmold to the wall studs with some 3-1/2 screws. The door screws will hold the door in place as long as the brickmold mounting surface is secure. Thank you for your question.

Use a 1/4" masonry drill bit for pilot holes into concrete block or stucco. For solid mortar wall it might be necessary to use concrete anchors. Here’s a link to using the non-reversing safety screws into concrete block: th-cam.com/video/K5gFVdFJDTM/w-d-xo.html Hope this helps.

The masonry portion is at 2:29 of the video link provided

Are you referring to the door closer or wind chain assembly?

Wind chain spring.. The one that came with mine looks different than the one I saw in a video. It has no way to grab the two ends to wrap around the nail or the chain.

The small spring is made up of sprial links. Essentially the goal is to use the spiral links to capture the nail and chain.

We do not have anything available to secure a protruding window airconditioner. There are custom fabrication shops that will make a box that will encapsulates the entire window air conditioner. Hope this helps.

Just to verify, is the leaf spring is needed?

@@grishambros7662 it's called a spring holder kind of shaped like the letter V with wings.

We do not use any conventional spiral springs. Perhaps you have another brand of screen?

@@grishambros7662 no I don't I have the directions & that is what it is called spring holder was suppose to get 2 ,one for top,one for bottom,only received one

Can be mounted onto stucco as long as you can penetrate a solid backer which is either wood or cement. Hope this helps.

Thank You. Glad it was helpful.

In some cases, the bars do add to the esthetics of perhaps a Spanish style home that is seen throughout California, and in other cases not as pleasing. We live in a different world now and it’s not easy keeping what you own from intruders. Violent crimes are up dramatically and surprisingly forced entry is down by 75% since 1980. I guess you could contribute the decline to better protected homes. Below crime statistics There are 2.5 million burglaries annually in the United States. 66% of these are home invasions. (US Department of Justice) Every 15 seconds a home burglary occurs in the United States. (Crimepreventiontips.com) Homes without a security system are 300% more likely to be broken into and burglarized. (Alarms.org) 46.9% of people don’t have a home security system installed in their home. (The Zebra) 83% of would-be burglars check for the presence of an alarm system before attempting a break-in. (FBI) 34% of burglars use the front door when breaking into a home. (Bureau of Justice) Police solve only 13% of reported burglary cases. (Pew Research Center) Thank You, Grisham Bros

Yes, the door z-bar frame is longer than the door to accomodate an opening height up to 80-3/4" high. So if your opening is 80-1/2 high, then you would cut the z-bar to 80-3/8" long. The process involves cutting the z-bar 1/8" less than your overall height size. Hope this helps and thanks for your question.

@@grishambros7662 Ok so my door height is 81 inch so whats my cut ?

Thank you, glad it could help.

Possible that the screen door is slightly bowed. You could bend the frame to fit the channel (called racking) by pushing on it either inward or outward until the screen frame bends and aligns to the patio door channel. Push on the frame starting in the center. Might be all thats necessary. Hope this helps.

Available via HomeDepot.com Grisham brand is not stocked in the Florida stores. Here`s some search info you can plug in for online search: Internet # 100577744 Model # 90002 Store SKU # 311101 Hope this helps.

This variety is our current selection available on HomeDepot.com and are available in black and white. As to an added layer of protection, I have seen the window bars used as an overlay over entry door glass panels. Can use stand-off or flush mount brackets with carriage bolts instead of the safety screws supplied. Hope this helps. Thank You, Grisham Bros.

James, we do not have anything that would adapt to a two or three panel patio door. Sorry.

The safety screw is tamper resistant. Allows you to screw in but not easily back out without altering the head of the screw.

Same type of screw people use on license tags on vehicles, except the screw for window bars will be a stronger type. Should be a special tip tool included with the windows or able to buy off line or good hardware store. The Bad, a crook can buy the same tool also though.

Great comments. A customer would be fortunate to have you as their installer. Thanks....

We just a got a bronze one from our Lowe’s. It’s labeled online as the brand Reliabilt -Item #1694018, but the packaging says Grisham.

There ia a pin connector available and correct not as secure as the standoff connector.

Glass or screen panels can be ordered through Home Depot. Please visit your local Home Depot to process your request. Thank You, Grisham Bros.

Rob, You would need to contact the Lowes store where purchased.

@@grishambros7662 ok thanks

Structural integrity is underestimated. Have never received a complaint for product failure.

Is an actual person. Proffesional narrator is an English teacher.

Eric, you want to notch the external sleeve and then snap it off. You can use a file or with a hack saw very carefully as to not cut the internal release wire. Thank You.

Same process. Might require wall anchors, but generally the screws will bite into the brick very well.

You may need a hammer drill and masonry drill bit as well for getting through the brick.

The sizing dynamics have changed through the years. Not sure which model year unit you may have purchased. Previous extended to 80-3/4 and the current will extend to 79-1/2 max. the 80 on the package is nominal size. Thank You, Grisham Bros.

@@grishambros7662 You call it nominal, I call it the height i need to reach or I don't have a screen door I have a very expensive sand sifter. Now I need to go to the hardware store for some metal screws and sheet metal for this thing.

Tina, the installation screws are non-reversing safety screws. Would require cutting tools to remove. Important to note the window bar unit swings outward for clear egress passage. Thank you, Grisham Bros.

Frank, if you mounting surface does not require any prep, then the installation should take less than an hour.

Should pull apart freely. Anything that looks bent is probably shipping damage.

The window should remain fully operational on a typical double hung window.

Is that the height or width? What is the total w x h opening size?

@@grishambros7662 the height. the width is 42 inches