วีดีโอ

Can this cut the bottom of sneaker rubber soles?

Great job. Neet idea. I need to make some of those for my grand daughters for Christmas.

Are you running factory acceleration settings, or did you bump those up?

that sounds like chatter/vibration central station. I have a smaller unit I bought from them before I bought a massive machine. It vibrates so badly it sounds like a dremel on crack.

I don’t know why they didn’t put better motors!? Those baby open step motors should be Closed Loop Nema 23 for being Ball Screw Linear rails. 😢

Thank you, you answered most of my questions.

Bunny and egg where do i get that file? Thanks.

What software is best for this model?

This is awesome. I've seen other videos of people really struggling with aluminum on this machine but I feel like its solid enough if you don't go crazy with the speed.

Can you cut 1/8 in plywood with this if so what is the speed and power settings

Hello I ordered the 40 watt version, upon inspection I noticed I was not able to distinguish between the 40 watt version from what I see online. Is there a way to confirm that my module is 40 Watts? Thanks in advance

Nice review - thank you.

Just take a look at the machine from the front your z axes looks to be on a slant to the right

You'll find that the E-Stop only stops the flow of g-code to the controller. All buffered data will complete. So, not really a E-Stop.

I like mine so far, had it for 3 days now, Where is that vibration coming from? I cannot track it down, I think its from the outer frame and echo underthe spoilboard. .... I am just installing some 2040 extrusion underneath the spoilboard, should rigid it up a bit and remove the sag. Im still waiting for some bits to be delivered so im stuck with the lame engraver bits included with machine. So far have engraved Red Oak, and Bamboo Flooring, Do you think this Z axis would handle a Dewalt DW660?_

Great video,well done. Question what is the dimensions of the enclosure? Also is that laser protect plastic cover?

Can you please do one try out with one marbel stone

Is possivel cut 9 mm marbel stone?

👀 'promo sm'

I was thinking of getting x tool but now I will be getting one of these thanks for the video

Hi - true Novis here - just starting to look at a laser purchase. I noticed that at 8:16 in your video, when you put up the riser legs - it appears that most of that area around the risers is totally open - if that area is open, then it would no longer be a fully enclosed laser - right? How do you exhaust all the smoke and fumes when the risers are up?

So before starting a job. 1. You home it. 2. Set probe and zero it . ? 3. Bring to corner of board zero that out and set start piont . And click start /send job ???

I'm fighting a problem with any cut that take over 5 min the flame sensor goes off and you can't restart frome the stoped position. To me the sesor is too sensitive

one other video i would suggest is how the L8 is in maintenance, such as how easy is it to clean the lenses. also, one constant nitpick i see from the few who reviewed the L8 is the underpowered fan. is it possible to safely swap it with a better one and if so, would it be feasible for you to make a video about it? thank you and i hope for more success for you in your videos!

thank you for this review. most of the new reviews focus on the Mk2 unfortunately and the genmitsu l8 seems to have been neglected. i hope to see more videos of this from you soon. i would like to suggest you test how fine it can engrave or how much detail it can do, since its fixed at 20 watts and not able to switch from 10 to 20 unlike some other brands. though i am happy to find out that it is more powerful than other 20 watt engravers, it would be good to know how it fares with fine engraving.

Thanks for the review!

Do you know if its compatible with the 4th axis or the laser rotary?

Bonjour ravi de votre vidéo j'ai appris comment régler la broche, j'ai reçu la mienne le 06/01/2024 très content mais de courte durée hélas j'ai le moteur Y1 ne fonctionne pas 😩😩 j'attend une réponse de SainSmart.

Do you have a video on how to tram this machine? I own this machine, and I am ready to make my first cuts, but I am having an issue tramming it. Any assistance would be helpful, or if you could point me in the right direction, I would appreciate that a lot.

Any idea what the length is on the front and back 2020 extrusions? Lost mine and need replacements!

I added the same Carbide Router. Works great. a side note, I connected the DC wires from the original motor to a DC relay that turns the 120v volt to an outlet that I mounted by the machine. This allows me to have on and off control that works from the program. Ran three programs with no problems. This motor is more robust than the original one and allows deeper cuts and higher feeds

Did you build or purchase the plexiglass dust protectors, if built so do you have plans?

Great...Can you please tell where the transparent acylic is coming from? :)

I sit still working well?

I just purchased the XE-PRO, but I'm worry that when I do buy the laser for it, it won't be able to print in color. From my understanding, color is produce on metal based on speed and power. While the XE-PRO is fast for a CNC, it's not very fast as a laser though. Can you confirm? Thanks

P r o m o S M 😘

Can I purchase this piece

Very nice, agree they should have an option to upgrade to rails I would gladly pay few hundred more for rails

Its still loud af 😂

where did u get the english app i only get the chinese version 😢

Nice video. It looks like an impressive machine. I have been using a MillRight Carve King (the original wood version), which is about the same size, about four (4) years now, without any problems. I am looking to expand my business and need another machine, so, I thought I would give this one a try and see how it compares to the MillRight Carve King. I 'pushed the button' the other day, Friday - Sept 16th, and ordered it.

how long did it take to finish the cut?

Wich spindle is that one :D?

I got the v1 just a few months too early. I would have loved the v2, though I feel linear rails would be easier than the eccentric nuts

Is there somewhere that you share your lightburn Machine and Device settings?

Check this linear rail kit and the results cutting steel!! th-cam.com/video/HsstPD72t4A/w-d-xo.html

Nice video, waiting mine to arrive in few days. I Impressive machine, runs extremely quiet compared to original. I don't miss the Musical steppers, they were cute at first

I was wondering what that extra endstop is you've placed on top of the Y-axis. Is that an additional safety measure?

Fantastic idea! Love how it turned out! Gives me LOTS of ideas!!

the spingle is a 800w or is 1.5kw?