วีดีโอ

What if I removed before having TDC 😢 it can be saved right? Just put at the same position

Link to buy parts

will this be the same timing marks on 2017 nissan pathfinder sv 3.5l and to set timing

Where’s the fuel pressure valve for these cars?

Where are you located??? Can you do my gallery gaskets on my 2014 q60s?

GM has got to switch to Direct and Port on their next gen engines!

I do appreciate your video I was somewhat sure I had figured out the timing process on this engine but was looking for confirmation I have timed so many engines over the years and yet I still get little nerves when I do timing chains your video was right on the theory of operation.Thank you!

ThanQ!!!

hey i want to know what size rotors do i need or spec should i be looking up to do this to the same g35x sedan model ..

What was the culprit ?

You are the man thank you so much you saved my a$$

Did anyone else have a good look at the front calipers? Looks oddly very autozone.

I own the Kia Cerato 1.6T GDi..Koup..engine rebuilt..and after 1 year about of use ..I try every 4 months taking intake manifold off..(gets easier ) ..then using CRC GDi intake ans valve and throttle cleaner spray ..trust me it desolves carbon deposits ..I then just blow it out with air..helps the GDi engines run better ..if you read the can..can actually just use it directly into throttle body or intake

Fuel system has me puzzled… it’s way simpler than that! Specially for a 340 lph pump! Second of all from what I’ve heard u should def be runnin atleast 450lph for boosted builds. So make it make sense why I’m runnin a 340 on my na and it can handle another 200 hp on the same pump???

What a stupid complex engine design for a measly 330hp.

Why do none of you show the tentioner tightening procedure...

Appreciate you sharing your knowledge and techniques. I'm doing my first full engine rebuild on a Ford 5.0 HO. Most of these processes are universal, but few people on TH-cam can describe what's needed as well as you. Thanks.

Lots of excellent techniques. Many thanks!

No one tell him that you can spin a wheel by hand. Way less potential for content that way.

Spartan does NOT have a primer. As stated below their product is a base coat/primer and the first coat should be a priming coat. I know that my Spartan regional rep in Nor Calif was terrific. Sorry your customer service was bad.They laid the NG 100 at a Caterpillar repair facility a number of years ago and the then metal track treads on dozers and tractors ran all over the floors and hardly left a scratch .

The fake brake covers lol

Thanks man! You made this seem so easy. No longer even worried about taking the car apart.

Reaching into a confined space whilst there is anything rotating, is an invitation to "life changing" injury. What a total liability.

Can you do same in a 09 rdx?

so which piston and rod would you take to the machine shop to balance the crankshaft?

Is that clicking noise when the tire spinning the wheel bearing ?

,tk Sir helping my work easier 👍

Excellent presentation for experienced technicians. Well done.

Thank you for this video. Everything that you mention it is coming as you said 👍🏾 I'm not done my job, but everything is helping me out really good. Again thank you so much

4 cylinder and 6 from gm have had this problem for along time leaking fuel into the engine oil creating pcv vapor rich issues v8 not asmuch alot of rich issues I see on the v8 is the ethanol content being 40 percent on these trucks reset the fuel composition and it goes back to normal see this in the v8 engines from gm more so then the hpfp leaking into the engine just a tip

great video!! i was searching up battery relocation for my 350z and your setup was really nice and neat can you show me a break down how you mount the Insulated for to the fuse box thank you

I just did this job. I changed everything, the chains, the water pump the tensioners the gallery gaskets. I used the pry points on the engine to separate the cover. Also, I used the colored links to line up the timing, there are diagrams online for the correct positions, also I set the engine to top dead center. There are videos to show you how to do this. Putting it to to dead center is probably the single most important part. Also the cam has two circles for the exhaust side and one for the intake side for bank one. Bank two will have two ovals for the exhaust side and one oval for the intake side. The orange links are your markers to match it up. The marks are on the sprockets.

bro very detailed and patient explanation great job is this also the same process on chrysler 300c?

I just changed my gaskets. I set the timing marks of the main chain before I took it off. I didn’t remove the secondary chains. I put the primary chain back on according to the yellow/orange links. Will this be in time?

That's a vh35r and turbo. But 350z motor

Out f**king standing....do you have a vid on head gasket job?

Thanks Pete for the tutorial. There's alot of people out there that don't even know their parking brakes aren't working. I was one of them and then my brother-in-law schooled me. Cheers

I know you got high flow cats but 500 wheel with stock headers is pretty nice! Great video! Very informative

Ok, now you stick your head inside the tire while it’s moving at 50mph, listen, if you hear.. 😂

Is there a way you can close the valves manually???

i need helpppp, for me the noise only appears after i’ve been driving for about 10 mins at 100km/h+ and it’s like a pulsing humming/vibration noise it’s like “WOM…WOM…WOM…WOM”. it doesn’t get quieter or louder, it’s at that constant sound until im no longer going high speed. it sounds like it’s coming from the front AND the back at the same time but mostly the front i THINK😭 idk how else to describe it to a mechanic bc im tired of my cars being misdiagnosed like i feel like im telling the mechanics the problems, they never actually know 🤦🏽‍♀️

28653 Herman Extension

There go your gas savings 😂

4:10 Can I borrow yours🤷‍♂️

The hoses that go to the control valve are not hot what could be the problem?

I have a 2017 Honda CRV1.5 turbo, says not fixeable no one can diagnose

Do you recommend replacing the timing chain, tensioners, gears, etc... while you are in there?

Your wife really hot🔥

So i had to do the gaskets on my 09 Infiniti g37. What i did to avoid the cams from rotating randomly while statically sitting was to use come flex wire and tie them together. Instead of removing the valve covers.

Wondering how it's held up for you over 4 years? Thanks