วีดีโอ

Yes, you should mention the year! I'm trying to locate my knock sensor on my 2006 VW Beetle!

where is the follow up? My trans guy said CVT and Chrysler minivan transmissions bought him his house.

Seen a kid do this at a shop I worked at he broke the crank bolt clean off

You're not rebuilding it if you're not putting everything into a chemical dip to remove the corrosion and fuel deposits. Spray carb cleaner only removed superficial deposits.

Every crank bolt you've ever taken out you've done this way? Guess you've never worked on a counter clockwise rotating engine.

My 2009 Lacrosse is very similar. I removed the rear bolt holding the taillight 1:36 on and I still can't get it off. Glad it was simple and easy for you, I'm stuck and your video is no help

I have been trying all day to budge the bolt on a 2014 Holden Colorado i will try this tomorrow when you put the balancer back on how do you tighten that nut back up with out engine turning over

I just changed my Val Body because I had the same issue. Got one from eBay that was rebuilt replaced and took it for a ride. Got the same code p0746 2009 Nissan murano I think Nissan jus trash frfr

surprised you didn't fill the hole. lol even if you didn't see it you would feel it.

I tried this. It did not work.

This works.

You are a lifesaver!

Should you unhook the battery when changing light bulb? 😅

what year is that? because the seats are different and the part that goes to my new beetle looks alot different, if I have the correct part.

Use penetrant, not WD-40 lubricant. WD also makes the penetrant.

superb vid.. just thought me everything i needed to know. thank you

Pretty Much All Nissans are the same going back to the 60's i hear but you'll need Regular Pulley Puller with TWO M6-1.25 x 80mm long bolts. Will get the crank off no problem. Did 2 of them in the last 3 weeks. 1 Was a badly abused 205k Xterra with water leaking everywhere. The Other a Frontier. th-cam.com/video/LfkICmQLArE/w-d-xo.html and link to details at Club Frontier is in description of video showing how simple those VG30 VG33 Cranks are to pull. THey come off Easy once crank bolt is broken. Do Not Use a 3 Jaw Puller. NIssan put the 2 little M6 bolt holes on either side of the crank for a reason. Watch the video i posted they're simple to get off

Doing mine today, thank you so much!

Make sure your engine doesn’t spin counter clockwise lol

Great job thanks for your help 👍

I have been trying to get the harmonic balancer pulley loose on this 2012 Malibu for 15 minutes. I decided to look up a video and this is the first one I came across. Thank you so much I had that sucker loose in 3 seconds flat. I'm not even qualified to be a shade tree mechanic, I just know how to turn bolts. This is a wonderful suggestion and solution.

Do you need a puller to remove the plate

I got get my Chrysler Sebring head gasket fix now

Thanks man following your videos and it's going exactly as you did it

I bought a 2013 maxima && mine did this exact thing. Please tell me it works & fixes the problem.

Another way is to put a cargo strap around it and tighten it

great how-to series! what was your baking soda/water ratio?

can you stop saying "preforated" please? 🙄

Thanks for the video. Helped me a lot.

Each side has two black covers to cover the glass bolts. You are missing three pieces. On later beetles they used a bellows type cove on each side. Search the junkyards, they look nicer.

It worked, thanks

This sounds like the problem with my 2012 Quest. I'm anxious to figure it out.

The ford fiesta has a dual clutch transmission not a cvt, I have had much success repairing the dct transmissions in the focus and fiesta unlike the altimas cvt, I have come to a realization that if it has internal cvt problems your only option is replace the transmission. I get stuck working on them ALOT being that I run a auto mechanic business.

This is great if you can turn the car over

Hi, did you figure out why the headlights go dim like that while idling? My 2000 SV650 does the same exact thing

Did same thing with Honda Pilot Crank nut Starter bump trick

Good video. I'm having the same issue on a 2008 Pontiac G5 with a steady amber check engine light on that has broken wires on the connector to the Fuel Tank Pressure Senor. The engine code was P0452. I know where the four jack points are on the pinch points. I have a floor jack and need to jack up the rear to get to the connector. The pinch points are small so I'm not able to use my floor jack and place a jack stand at the same pinch point. My question is where did you place your jack stands to lift up the rear of your vehicle? Thanks

You better be careful Grandpa and that Chariot doesn't end up in Orbit

Will this work in a 2006 Volvo v70

You shoulda done the brake lights

There is 0 Coolant in my engine and it is disconnected from the motor mount can I still do this? I’m so tired of seeing this trick

Manual says last torque step is 60 to 65 degrees which seems pretty low for these bolts....can u please confirm if that's correct or I'm missing something?

Very helpful Bro😎🖖🏼

I have tried nearly everything to get my pulley bolt off, it will not budge. I'm not sure what to do now.

I watched lots of videos on how to remove the crank pulley bolt but I never seen a vedio on how to install and torque the bolt, the pulley on this Nissan is not pressed on it should slide out you may need a rubber hammer to tap the pulley out.

Once I heard his voice I knew every word he said would be true as Gospel

Where’s part 4?!

I've done the HB on 2 Xterras and used those "little" holes. They're just fine. Then I used plumber's tape (thin, perforated metal that's easy to bend by hand) to attach them to the puller, and off they came. I didn't break anything at all. And I didn't need to use the starter, either.

Did you program the valve body at the Dealership?

Doesn't work on a counter clowise turning crankshaft!