วีดีโอ

Appreciate the comment. Thanks🤘

Much appreciated. Thank you🤘

For me( at least in LUNA). I use a Roland TD30 map preset. And chokes work just fine. In the plugin. Go to load preset in the mapping page. Choose roland td30. Everything should mostly map just fine. I occasionally need to change a splash out for a crash with the midi learn function. But chokes work for me.

I don’t believe so. There are three sensors on the snare. But I dont think moving changes the sound per se

@Bearvswolf I'll find out soon, I'm just interested in the meantime

Thanks. Yes, the module has a wire harness on it. And you can take 1/4” L and R outputs right into a mixer. The newer pro modules have multiple outputs if you wanted more control.

Feels good to me. You can tighten/loosen the heads to your preference. My hands do wear out faster on electric kit I have noticed.

Thabks for the input. In this case I wasn’t using any cab sim. But I can see how it would change things. I ended up sending it back but happy with the Kemper sound at least for now 🤘

Thanks🤘 They made a great pedal

Sure. Thanks🤘 Name: Two Rock Classic Rev Author: AlexisBoyer Amp Name: Two Rock CR

The drums are Efnote 5, E drums.

Sounds Great!!

@ thanks for the feedback🤘

Yes it can record. I believe its a stereo recording.

Appreciate the comment🤘

I heard another reviewer describe something like I tried to convey. That the nano has a “sheen” on it. I think that may be why it would work with FRFR. Either way, I know it works for people. Ive seen other videos where it sounds great. Thanks for the comment🤘

I use one connection. HH control. That will cover everything

@Bearvswolf great thanks then what's the point of the extra hh input? For roland hh? 😅

@@bingminmin just a guess. But I think they use the same module for other kits. So the lower end kits that dont have the optical hi hat might use the regular 1/4 inch jack. On efnote 5 you use a regular hi hat stand. On the 3x I think its a footpedal not connected to the cymbal. So the control would maybe connect to the pedal and the HH jack would go to the cymbal (trigger). 🤷‍♂️

There is actually a solution. But I don’t think it works in cubase. My efnote 5 module can send out of its micro USB output both midi information and think its 7 tracks (5 mono and one stereo) of audio. The catch is, as far as I know this only works in Logic Pro. I have always wondered why that is. Maybe a firmware can fix. Out side of that, I don’t think it can output both midi and line level audio at the same time through its other outputs. Only the usb. I will link a video on the subject.

th-cam.com/video/eHZU4p6oiao/w-d-xo.htmlsi=yXaS-7gBzX0wvPQ-

@@Bearvswolf Hey, thanks for replying, yes i saw that video, looks very easy on Logic Pro, i wanted to leave that for like a final desperate move, since i have to install MacOS and then get Logic Pro, and also, i have no idea how Logic Pro works, i used Cubase like since forever... Efnote went too far with the compatibility and auto rejection thing... I see you got Cubase there on the background ? how are did you record the Efnote module sounds to the video?

@@youtubebrowser1635 I dont own cubase. It looks like I am using Luna on this video. It would have just been connecting the two Line level outputs L/R into my interface. Its possible that if you had an inter face you could accept the line level outputs from the module as well as the standard midi outputs. You of course only get stereo drums. But if you are just trying to remove the cymbals from the mix that would work for you. Assuming they output simultaneously

@@Bearvswolf oh i see, im gonna try that.. looked to me like Cubase yeah, the interface and colors are pretty similar, well, thanks very much man for all the info, im gonna keep trying, be well man, thanks.

I agree it does actually sound like an electronic kit. But doesnt ezdrummer make it sound like an acoustic tho?

The closest thing I have to an FRFR is the kemper kabinet. Unfortunately it does not work with the nano. So I don’t know. I only tried it through a standard cab V30. Lots of people like their Nanos through FRFR though.

Great video🤘

I am with you. I thought the stock sounds in tonex were underwhelming. For me Kemper does the job. Thanks for you comments🤘

You can try to convince yourself that your Kemper is the best thing since sliced bread all you want, but the truth is Kemper is not the best sounding unit on the market. Sorry to burst your bubble mate. It is what it is.

@ I’m not here to convince myself. My decision was an easy one. The nano sounded worse. I bought it thinking it might sound better. As I said in the video it sounded fine plugged into my interface and DAW. But for the application relevant to this video (monitoring it through a cabinet), for me, it was not even close. I didn’t make a video to convince anyone. Just share the results and perhaps get any knowledge on how to make the nano sound better.

@@Bearvswolf I replied to guitartoneSA's post, not yours.

Luckily I have not had any issues in that department. Have never had so much as a software glitch with mine. And I bought it used. Thank you🤘

I didnt try it through my amps loop. Maybe I should have tested that. But I didn’t care much for the kemper that way either.

Just get a Suhr Reactive Load box and an amp, you won't regret it. "No Regerts"

@@PainterDans I do have a load box and a Friedman runt. 🤘

You tried both? Or you mean in the video?

@@Bearvswolf I have tried both , returned the Nano as it didn't the capabilities I need compared to the kkp . plus I still have the quad cortex . I was just hoping the nano could replace the kemper .

Its a great rig👌

There is a 3rd crash connector. So Hi Hat. 3 crashes. And a ride.

Yes I like the AD sounds. Very natural. Slate has great record ready sounds. I have never tried Superior Drummer. I had a trial of EZ drummer and really did not like the sounds. For what its worth

But on the td3 you can't really do anything about it

Great info🤘

These are sounds from a plugin FYI not from the module I dont think. I believe I used slate plugin. Not its not a glitch. What you are hearing is when the drums are being picked up by my mic for my voice. When i am talking over my playing i have both audio tracks live. When I am only playing i cut out the audio of the mic so it sounds better. I do have lots of shorts that showcase the sounds of the efnote though if you are looking to hear more. 🤘

Thats great🤘

Thank you🤘 Sure, anything specific you need to know?

@ I would just like to know how to use drum samples, in pro logic or Steven Slate trigger two? I’m gonna buy the F note 7X here in a few weeks.

@ gotcha. Just FYI. To use with an electric kit dont get trigger. That would be to replace acoustic drums youve recorded. You want Steven Slate Drums. SSD5. That will be used for Midi and electronic drums. Thats a video i could make though. 👍

@@Bearvswolf yes a video would be nice. You sold me on the efnote and I’m going to get the efnote 7X and hopefully get to also run Steven Slate with your help.

@@Bearvswolf i´d also really appreciate if you could make a video on how to set up the Efnote with SSD5. I kind of struggle to set it up properly with my Efnote 3B.

I believe they are just the cymbals. Because you can send a line out to Logic and have the drums broken out to sep tracks. And a stereo of the cymbals. I dont think there are drums in the overheads. But if you use a plugin (slate, addictive) you then get drums in overheads as normal.

@ cool, I used to have a strike pro, sold it when we moved and I’m leaning towards this for recording at home. They’re pricey here in Canada though, about $4400 cad. Seems to be the perfect sizes for my space and has all the features I want.

Thanks🤘 Funnily enough, last week someone said “stop twirling the sticks”😆😆 I don’t even realize I am doing it at this point🤷‍♂️

Thanks🤘

Yep. I usually use Slate drums for the electric kit videos.

I wouldnt say many of the sounds in the module are punk suited. But some good standard rock tones. I bought mine used and it came with the rim split on the snare. So it is possible to over play on them. Im not the heaviest hitter so I havent had any issues with them holding up since though.

Appreciate it. How do you like you efnote?

@@Bearvswolf I think it's excellent - particularly the cymbals, but (as per your video) the Efnote version of the 'round robin' isn't very satisfying. So, I tend to pair Efnote 7 module with another module that can do sample import (currently a 2Box) so that I can swap out snares and toms that play and sound more acoustic due to the depth of the sample layering. I'll do a video on my channel on that topic soon!

@@Acoustic2Electronic I will look out for it👍

These drums were recorded via midi. Triggering steven slate drums. I think the preset was Big Beefy Dry. Thanks for commenting🤘

Its an original piece. Just an intro idea I had this last couple days.

Glad it helps🤘

Much appreciated thanks🤘

Thx🤘