Dealer Mode & FI Codes on a GSXR 600
ฝัง
- เผยแพร่เมื่อ 6 ส.ค. 2019
- In this video, I show you how to access the dealer mode in a K7 GSXR 600. Go over all the FI codes and possible causes.
2:04 How to access dealer mode
7:00 Explanation of Self Diagnostic functions/Overview of FI
Codes/Location of Electrical Components
9:14 C11 Camshaft Position Sensor (CMPS)
10:02 C12 Crankshaft Position Sensor (CKPS)
11:01 C13 Intake Air Pressure Sensor (IAPS)
11:59 C14 Throttle Position Sensor (TPS)
12:52 C15 Engine Coolant Temperature Sensor (ECTS)
13:29 C21 Intake Air Temperature Sensor (IATS)
14:06 C22 Atmospheric Pressure Sensor (APS)
14:45 C23Tip Over Sensor
15:28 C24, 25, 26, 27 Ignition Coil
16:28 C28 Secondary Throttle Valve Actuator (STVA)
17:05 C29 Secondary Throttle Position Sensor (STPS)
17:58 C31 Gear Position Signal (GP Switch)
18:28 C32, 33, 34, 35 Primary Fuel Injector
19:23 C36, 37, 38, 39 Secondary Fuel Injector
20:15 C41 Fuel Pump Control System
21:07 C42 Ignition Switch
21:30 C44 HO2 Sensor
22:09 C46 Exhaust Control Valve Actuator (EXCVA)
23:08 C49 PAIR Control Solenoid Valve
23:40 C60 Cooling Fan Control System
24:07 End/Location of Electrical Components - ยานยนต์และพาหนะ
Super helpful - thanks for taking the time!
Got it fixed c32 code. Brand new ignition fitted. 500pounds. Runs perfect. Now. Thanks. 4 help
Very, very helpful. Thank you!
That's my dude... Saving my bike
Dude awesome job
Thanks!
Have the same bike and code C00 (have a aftermarket exhaust) but you can remove that FI light by installing a Woodcraft Servo Buddy. If the red light comes again it's because there's another sensor issue which then you would obtain the code again. Suzuki sells a device/switch that you can directly place over that plug then turn on and you'll get the code without having to use that small wire.
Thank you great help
Glad you found it useful.
Thanks. I got the same C46 but to see it i had to start engine. How did you fix your C46?
Hey Dude, just bought a secondhand 2011 GSXR1000. The FI light does not comes on with ignition on and engine running first starting up engine. The FI light comes on after riding bike for about five minutes with no noticeable issues with loss of performance at all. When I stop bike and turn off ignition then turn back on imediately the FI light disappears. So I tried the procedure for checking FI code and my code is -C00. Fella I bought the bike from said the code comes on because he was not able to access premium fuel and the FI light would disappear when I run a tank of premium fuel through the engine. What do you think?
Putting the jumper before turning the ignition clear the codes. That's what I've heared.
What do you mean putting the jumper I need help to clear the code
Thanks for the diagnostic demo dude. PS The reason I'm looking for the explanation for the FI code is because the engine is running rough, I was running out of fuel and the fuel pump sucked up some sludge at the bottom of the tank, so I removed the screen and cleaned it as best as I could and at least it runs now and I added some Sea Foam to the fuel, and poured some directly into the carbs but it does not accelerate beyond 1/2 it's top speed and after only a few miles it dies... so there's that. The FI Code may have nothing to do with the dirty fuel although if FI translates to Fuel Injectors.. maybe it does??
To complicate matters have this aftermarket keyless ignition which pre-dates the dirty fuel problem so my SV650 startup sequence looks different than it did prior to the install... that is to say; I don't see the red FI code until I start the engine up.. So, in order to further diagnose the problem I am about to try and start the engine with that little jumper in place, unless someone out there (hopefully today) advises not to start my engine with the jumper in place, that's what I will try.
PS.. Thanks for breaking down the times that one can skip to in your video and get to the exact code needed to diagnose the problem. Peace. Mac out.
I'm glad it was helpful. I had an 04 600 and I had a similar issue. I ended up having to clean the entire fuel system. It had sat around for some years and it needed to be done, not sure how bad of a case you might have but it might not be a bad idea to at least replace/clean your fuel lines, clean your primary/secondary fuel injectors, clean your fuel pump filters, make sure your fuel pump is working properly, and try to clean the inside of your tank as best as possible. Primary fuel injectors FI code would be C32, 33, 34, and 35...........Secondary fuel injectors C36, 37, 38, and 39. If there was something going on with your fuel pump you would have a C42 code. So if you aren't getting those codes, then my guess would be that you just have a dirty fuel system and it's just a matter of taking care of one piece at a time. I would start with the tank and work my way to the injectors.
@@MotoBeto82 Update: I applied the jumper as noted above and started my engine and the red FI light went out... for a few minutes and while I'm waiting for a C____ code to show up, instead nothing happened and a minute later that darn red light/FI indicator returned. So yeah that didn't work, and it's back to the same problems as when I began. I wonder if there's another way to diagnose that FI code? Maybe there's a button on the back side of my instrument cluster.. I saw this Suzuki mechanic video but it was done on a different modle of motorcycle where the mechanic reached his hand in behind the instrument cluster and somehow activated a secret diagnostic mode on the bike.. it could be that easy.. easy once I take the fairing off.. so, I don't have much choice.. not having a network of small engine mechanics or even so much as a shop manual.. wish me luck.. here goes nothing.
How do you move the bar next to the C28 code to the middle?
What a champ
Excellent info as my k3 gsxr won't Fire up just Fi light on.
Glad it helped. Hopefully your issue is nothing major,
Hi thanks for the vid👍.
I have the -C00 after using a bridge wire method. How do I get the FI and solid red light to clear now then if I have this ‘no code’ and there is no actual problem. I cud understand if I had an error code which led me to fix a known problem then it would clear itself.
Cheers if anyone can help?
Buy and install a Servo Buddy. Once installed it completely took away the red annoying light.
My dear friend, good morning, as I am very far away and we are separated by a large sea, I have the following question: I am also a lucky owner of a suzuki gsr600. Two or three days now while I am on the move my F1 turns on. I stop after 50-100 meters I turn off and after a couple of minutes I put it back on and the F1 light goes out but after a few kilometers it turns on again, the engine works normally. From a normal start it lights up like all the lights and immediately goes out, I put forward with dead speed and it does not light up as soon as I travel 3-4 kilometers it lights up again. You can help me?? Warm thanks in advance
What are the requirements for a gsxr k7 750 to start? When I push the start button, it won't start/crank. I don't hear the start relay clicking. Relay is still working, I checked. Clutch sensor also working. When I push the start button, the headlights go off (and back on when I release the button), so the button itself is also working.
Have you checked if your kickstand sensor is working properly?
I just threw a C11 code. I just put a new regulator rectifier, stator and battery. Man these bikes are always problematic! I need to fix the camshaft sensor and sell it! I know it's a 15 year old bike but only 34,000 miles it should be still fairly decent parts wise. Always garaged in winter and battery tender. But I'm about done with chasing Gremlins! Thanks for the video!
Did the C11 code go away after you replaced the camshaft position sensor ? My bike doesn’t start when it’s hot just cranks, I’m getting a c11 code as well
Hey man I have a question I'm Hoping you can help me with cause it seems like you know your stuff. When trying to get the code for the F1 light that came on my 2004 GSXR 600, I think i may have jumped the wrong wires and now my bike won't even crank. I think i may have shorted something. Any suggestions?
My bad, haven't logged on in a bit. Oh no, sorry to hear that man. Hard to say with just that info. Does your dash lights come one, head light, ext ext??
Thanks alot i have a 2007. Gsxr 600 just got it 3 days ago but the headlight is not running now it doesnt want to turn on it has trouble starting. I think its the switch is not working problably because if i move it around the head lamps turn on its my first bike would really like to know what maybe the problem thanks
Aww man, sounds like you might have some electrical gremlins in your bike. I would check all the couplers make sure they snapped on correctly as well as all the wires (make sure there aren't any shorts/burned out wires). Could definitely be the headlight relay. Hopefully it's an easy fix for you. This year/model is know to have issues with the rectifier and stator. The rectifier is located between the engine and the radiator. All the heat in that area causes the wires inside the rectifier to melt causing damage to the stator and possibly other parts of the electrical system. Wouldn't hurt to relocate the rectifier. There are many after market brackets made for the rectifier and it's pretty easy to do. Check them out, could avoid you some issues later down the road.
@@MotoBeto82 will do that later on. Thanks for the info think i might just get the right hand kill switch unit. But will update in case someone needs this in the future.
Hi I have a problem in my Gsr600 fuel pump not showing any current? So what do I have to do? It's very hard to find a good mechanic in Pakistan. So if you have any kinda communication to contact you live let me know?
2006 GSXR 600 C00
Is that red light always on on all models? I just bought a 2005 gsxr 600 and that light is on but when I check it it did same thing came up as C00
Buy and install a Servo Buddy. Once installed it completely took away the red annoying light.
Hey What mean the code -C40?
I was riding yesterday, and randomly saw my HUD shoot up a constant red light, and right next to it said "d5" i kept driving and after 2 minutes i started loosing power and it turned off itself, I tried to turn it back on, but the battery was completely dead..
I even tried to jump start the battery and the bike ran for a little bit, then the battery died out again, completely. do you have any idea what could it be?? thank you.
Did you ever figure out what the issue was I'm having similar issues except my bike isn't dieing on me while I'm riding at all but when I go to start it I have to jump it off and error code 5d or Sd pops up
Hey man, thanks for the info. I got the code c42, my bike cranks up but it doesn't start. Now if I change the ignition switch, should I change the ecu and immobilizer as well or just change the ignition switch itself and problem solved? ? Please help...
Hey I had this exact issue a few days ago. I thought it was a loose wire at the ignition plug under the airbox so I soldered all the wires together. I also thought a loose wire was culprit at the ECU but no dice. As I read on the Gixxer forums someone simply sprayed WD40 down the keyhole and used compressed air to blow away excess. Personally I used CRC QD Electronic Cleaner and a compressed air spray afterwards. Flicked the killswitch multiple times to make sure it primes and I have had no problems since. My bike does not have an immobilizer so your experience may be different.
@@Lukeon2 i tried all this except the soldering thing but I check the connection with voltmeter they all good. Thanks for your reply man
@@salemkraidi3530 Did you try replacing the 100 Ohm resistor in the ignition assembly? I believe there's info on that in the Gixxer forums
@@Lukeon2 yeah I got those 100ohm resistor but I was hesitant to do it as I don't really know which wires this resistor should be connected to, all I know it should be connected between two wires lol. Do u have any idea which one ? Thanks man for your help👍👍👍
Hey man. Unfortunately, I do not have much experience diagnosing that particular problem. I would start with the cheapest part first. If your ignition switch is faulty obviously the bike will not starting, you will probably have issues turning the key or taking it out. If your bike would suddenly shut off while you were riding could be another clue. You said you checked all the wires and they were good. Check your ignition switch before you replace it just to make sure. The black wire is always going to be the ground and I believe the blue wire is going to be the hot wire. Definitely check the immobilizer/anti-theft system as well (mine doesn't have this so I'm not too familiar). On your ECM, on the black coupler, pin #21 is going to be the one for your ignition switch. So you can maybe check to see if there is a signal getting to your ECM. Maybe that could shine some light as to if the ECM is not working properly. Sorry man, that's all I got. Hopefully you get it squared away.
Is this tha ignition one
I have the same problems show no code but only when I ride I see the f1 com on
That's strange. Look at my response to awesomesauce666.
MotoBeto82 were i dont see that respond
My guess is that it's going to be your EXCV actuator. Code C46.
MotoBeto82 i never got a code only -c00 when i riding it flash f1 but I realize i have ofter market pipes on it
Como solucionar el C-22
My K8 600 has a “5d” code on it. Is that the rectifier?
Me too, did you find out what the issue was? Please update me!
Homan Lam my bike wasn’t turning on anymore, then I put a new battery on it. And now it’s working just fine. But I’ll need to replace the rectifier because it will drain the battery again and the code will show up.
Sorry Marcel, I'm not familiar with the K8. Usually the codes start with a C.
U. p. Stands for Up ⬆️ 😅
you didn't have an FI trigger, when yo get an FI trigger it flashes between FI and CHEC, that means its telling you to check for the code, if its just FI check connectors so forth, its prolly something intermittent or going bad
F1 C93 what is thes
Suzuki gsx_r 2008
Your model year is different than mine. They came out with a new model after k7, which is what i have. I quickly looked it up and it looks like C93 is the steering damper solenoid valve for a k8 600 but like I said I quickly looked it up. If you don't have the service manual, I'm sure you can find it for free online. Just download it and look it up.
i tried to find the codes but i got
“ ----“ and it disappeared
That's strange. I've never encountered that before.
UP stands for up 😂 ☝️👆⬆️🔝
C00
suzuki gsxr 600cc 2009
Nice.......means you are good to go.
Step one: START THE BIKE
step two: wait for FI to light up
Step three: put bike into dealer mode
Step four: read code
If you're getting a FI code light and you're reading -c00 you did not put it into dealer mode properly
Dealer code 2005 gsxr 600
i dont have a 600, only got an 125, still helpful but wont be doing dealership mode.
You forgot C40
No C40....double checked in the service manual and there isn't a code c40. At least not for the K6 and K7.