PROJECT "OVERKILL 2020" (PT4) AXLE CHOICE - Vanquish F9 Currie ALL-METAL PORTALS | RC ADVENTURES
ฝัง
- เผยแพร่เมื่อ 24 ส.ค. 2024
- I had little doubt in my mind of which axles would be the most appropriate for the project this entire time - and I really appreciate everyones input on which axle they thought I should use. The setup is extremely expensive, and very Overkill.. which is in the right theme of my Ultimate Tough Truck Build. I have a long way to go in this build still.. but the axle decision is fundamental and paramount to the direction of a build. The Vanquish Products, Licensed Currie Portal Axles are the top of the top in price point during the time of this filming - but what king of innovation does it bring to the table? Well, they are light-weight, the front steering axle has somewhat adjustable Toe in/out on the steering throw as well as i absolutely LOVE how the steering C-Hubs are mounted to the axle. The replaceable, threaded insert is pure genius. This will eliminate the terrible day on the trail where in times past.. your day was ended early by a stripped out c-hub screw. I also like the helical cut gears for the pinion and spool gear. In regards to the steering.. the Dual Steering Link Horn is nice on the spindles as well as the Back axle can mount Dual shocks.. .. So all in all.. VERY OVERKILL!
Vanquish Products say that their front axle has the following features:
Features:
Portal box built into the included knuckle with bolt on high steer arm for double shear mounting
Gear reduction in the portal of 1.67:1 (18/30), Optional Overdrive Ratio of 1.4:1 (20/28) recommended for use in front axle only.
Included Vanquish AR44 machined gear set
Overall axle reduction of 6.26:1 with stock portal ratio
13mm increase in ground clearance
Specifically design offset C-hubs is machined into the housing for strength, durability, clearance and scale appearance
Hex to hex width of 7.66 inches, only roughly 5mm wider than a stock AR44 axle with a narrow hex
Replaceable Chromoly threaded inserts used at knuckle and C-hub to ensure a stripped thread doesn't ruin your investment
Brass knuckle bushing from the AR60 axles are used in place of SCX10-II sized for more durability.
Chromoly AR60 size VVD axle shafts come preassembled
Chromoly stub shafts with 6mm design at the drive pin which tapers down to a 5mm thread for ultimate strength
Chromoly spool
Aluminum 12mm hex with set screw
Compatible with stock SCX10-II Chassis mounted servo or F9 Servo on axle mount
Uses all SCX10-II linkage
Adjustable steering stop integrated into knuckle
Complete Fast Eddy Bearings kit
Licensed by Currie Enterprises
Comes with One Piece Bearing Retainers (Patent Pending)
Double shear shock mounts
Integrated Panhard mount
Upper link mounts built into third member
Increased upper link clearance for more suspension up travel ability
The Vanquish Currie Portal F9 SCX10 II Front Axle Kit is an all inclusive axle assembly that creates extreme amounts of ground clearance under the center of your axle. By increasing the pumpkin clearance by 1/2"+ (13mm), it creates the equivalent of running a tire that is over 1 inch taller than what is on your rig. But the real advantage of the Vanquish Currie F9 Portals is the gear reduction inside the portal (1.67:1), that can be tuned with optional gear sets (1.4:1 Overdrive - VPS08353). By adding reduction at the portal, less torque is transferred through the other upstream components in the drivetrain.
SUBSCRiBE & “Ring the Bell" ► bit.ly/JOovvU
MISSED an RC ADVENTURES film?! CHECK HERE: / djmedic2008
EVEN MORE RCSparks Videos: / @poppygoatshomestead
"1 Million Views Club": bit.ly/2AYVrAF
RCSPARKS Shirts & MERCH: shop.spreadshi...
RC ADVENTURES™/ RCSparks Studio™ © 2020 Medic Media Productions Inc. All rights reserved. Publication, reproduction or distribution of this film by any means whatsoever - including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world - is strictly prohibited without the prior written consent of Medic Media Productions Inc.
RE-UPLOADED - *NOW WITH NEW ALTERNATE ENDING!!* Quality over Quantity
I literally just got done watching the original ending and was going to point that out
Ah ok was wondering didnt i just see this Lol
👍
Arnold Schwarzenegger
Hey Medic, I like it when you do the build outs! I just bought a TRX Blazer it came all assembled but it's nice to see the portal axles general system works for future upgrades I'm sure to do!😉
Still watching! The process, “that’s what she said” wiggle & push it in 🤣
I love the in depth tutorials cause it’s nice to have a reference to folow along if I have a problem building
I always watch all the way through, really enjoy the tutorials, thanks.
Even though I'd never be able to afford those axles, I LOVE watching you build these kinds of things in depth!
I love when you build stuff and I don’t skip them ever. Love building!
new respect for engineers that came up with the design and machines that can mill / produce all those parts to such tolerances.
Always like tutorial builds. It helps out a lot if I get stuck on reading or looking at instructions that aren’t quite clear on discriminations or pictures. Amazing axles they look great and very durable
Thank you for sharing
yep, sure do like watching the full builds because it is a good learning event
Hello from wales ,first off what a great channel with some fantastic builds ,some time back I became too poorly to work and I started to deteriorate mentally which showed up as a lack of interest in life at this point my family suggested I got back into some of the hobby’s I used to love which was rc cars , got on utube and found you’re channel where I watched with absolute amazement when you showed you and you’re mates rc crawling ,boom ! Got enough money to buy a second hand axial 10 mk 2 built a small crawling track in my back garden and totally fell in love with the truck and the hobby again.I too have a wonderful wife and three fantastic (grown up ) kids but where I do envy you is you’re mates ,I brought an axial after watching you boys driving them which turned out to be an awesome buy ,nothing has broken which is what makes the kit so good as money is not readily available.So this is the bit where is thank you to you and you’re mates for the help ,god bless and I hope you get better soon
Glad you were able to catch your oops. I've done the same thing before and went to install it only to discover that I had it flipped. Great video
I like seeing you put the whole thing together
Really enjoy watching you out this stuff together, let’s us all see the products strong spots, or if something breaks on our own rigs we can watch how to pull it apart and put it back together the right way
Still watching . Love seeing the detail. An extra footage.
Still watching. Building my first grand hauler and still new to hobby so love watching build videos
These videos are a great help for if I were to build a truck like this. But for now, it’s a great way to pass the time in this long cold winter.
Still watching and I appreciate your in depth building.
I personally like seeing the the longer build videos instead of just jumping from one part to another
I love seeing the time you put in, building is like a big plus because we get to hear stuff like the mittens thing
Your videos inspired my son and I to get into RC trucks. We bought our first RedCat gen7 a few weeks ago and have been ripping ever since.
I'm still watching and I enjoy the builds the most.
It's badass how them Axel's r manufactured just like a full size vehicle. That's why they're in such a high demand.
Still watchin and I like it when u show the step by steps of ur builds. I have been thinkin about gettin back into the rc hobbies again. I use to do the rc world when I was younger. Keep up with the great videos and inspiration.
I like the choice of axles keep driving RC's
That’s why it’s called Project Overkill. Go big or go home. Vanquish products are expensive, but they are a good quality product.
thanks for the in-dept video of how the parts are built properly i love them THANKS
Definitely worth the cost, and the fun of assembling them!
Cheers
Doc
Still watching. I enjoy the how toos.
Thank you
I like watching builds on the channel it feels more involved!
Omg i just realized i watched u guys over 4 years ago you guys got me into building rc trucks and cars 💗💗💗💗💗💗
I'm actually glad this isn't for kids, I really do enjoy it. Great vid
Vanquish is I think the best stuff I use them on all my builds. The Vanquish Method bead lockers are really nice.
Yep still watching I'm liking it👍😎🇺🇲
Still watching the build, enjoy each part of it.
Bitch mittens 😂 I love it! Great content! Love watching the detailed build videos.
Love watching you put stuff together and seeing the innovation in the products
Definitely keep the details Medic. A lot of the information is cross platform ..... don’t put stuff upside down .... use the right bearings.... don’t forget the lube.... these things apply to lots of builds and are super helpful to beginners. Keep up the great builds !!
Cheers
I already own these axles and still sat and watched you throw them together just to see what other people think about them. They are a pretty incredible product, not quite as light when you get them together but still way lighter than a trx4 aluminum axle.
11 mins. Still watching. Love the step by step. Great video so far.
Awesome! Thank you!
That is some sweet hardware! This is gonna be an absolute BEAST! Love your videos, keep up the good work!
i love seeing how things together
For sure here for the build! Big fan of the step by step
I like what Vanquish does, its a premium product for a premium price witch is perfectly fine for me. There's plenty other choices to choose from and at every prices, Vanquish simply decided to be at the top!
That’s the main reason for watching love watching the builds
Love seeing you tips and tricks also your very honest and helps when buying and building in the future! Thanks Man!!!!!
I feel I just watched this !! Lol
Those are some sexy axles !
would want to be considering the cost!!!!!!!
If it makes u happy to see that u have name brand really expensive heavy duty axels then it’s worth the smile
For those who dislike this video how could you it is about Rc fun how could you dislike that
I love it when you show me the whole assembly. That's the best part! TH-cam is from my point of view something like video Wikipedia. And there I want to see everything in detail to understand it!
Thank you for taking the time and producing such good videos!
Still watching and enjoying it
Those portals are alot slimmer then The trx4 and look good AF. 😍
Please keep us in the loop. Love watching the builds. RC forever!
Love the actual building in your build videos. Love the detail. Cant wait to see this bad boy in action!
my son and l learn alot from your how to tutorials plz keep doing them
I love watching the build series
YES! I am glad to see the build! I’ve never done it and I’d like to, so very nice to watch. Cheers.
Hope you enjoy it!
I like your builds and the fact that you talk about what you're doing.
Thank you Ron, hope it was easy and clear to understand :)
Still watching and enjoy the process. It helps me because I'm new to the hobby
Thank you for commenting and letting me know!
Totally watching the assembly
I’ve always said...overkill is underrated!
I like the builds gives you in-depth of the hole part ancd all the guts and quality of the peace 👍.
Not into R/C cars (I fly), but I love learning about how things work. Watching these types of videos is greatly informative!
Called it, yes. Awesome choice in axels Medic.
Good choice on the Vanquish F9 Currie axels
Still watching in Idaho 👍👍
I really do appreciate the detailed build videos. I love the info that is learned from these!
THANK YOU!
I do think quality products do make a difference, especially in the long run.
Stiiiiiilllllllll watching! Always good to learn new techniques!!
Absolutely worth the cost for vanquish quality machined parts!
Thank for the build! The longer the better
I would like to see an independent rear suspension. Very nice axles, too bad they cost so much. I enjoy watching you build them.
I love the in depth building honestly and yes paying the money for name brand stuff is worth it to me I just bought the new trail walker and put name brand stuff on it and took it out the other day and it took a nice tumble and kept on rolling because I put name brand upgrades on it
I love that you take the time to do these videos. There truly inspiring. Thanks my friend
I enjoy every 0.01 second of the build videos you post. Keep them coming please
I enjoy the step by step builds n not so much for just big updates
Im still watching u right now not skipping ahead
11:09 min I’m still watching. Interesting how you’re building this peace.
Yeah bud, I love watching the intricate stuff
I like watching you build these
Love the detailed build videos!! When I get bored I scroll through your channel looking for build vids I’ve missed :)
Special project warrants special equipment in my opinion, Yeah!
Hell Ya! If your going to build a tank of a truck, build it TOUGH
I fly rc planes and drones....I can't afford one of these BAD BOYS...I truly enjoy you channel in every aspect of the show....but my favorite of all is TH-cam GOLD....!!!!! GREAT VIDEO MEDIC....!!!!! keep them coming...
Keep doing builds!!!! They are so helpful if I’m following along
The grease helps when you are wiggling and pushing it in. LOL. Always like your build series.
Definitely enjoy the assembly
these vids are my favorite, please don't ever stop makeing them
I miss the build videos so I'm happy
Luv vanquish, there all I use. The petal ri stick if u order direct from them, and u get stickers when ordering direct.
Portals instock
It is a very good choice for these axes, they are expensive but they are really at the top. It is very good work and your explanations are excellent. Really a great project !!
Extremely enjoy the tutorial. Helps tremendously.
I watched this video yesterday at like 8 because I saw it at my home page but I got the notification 10 minutes ago gotta love youtube
Always with the quality!
I definitely enjoy watching you build the parts of the truck. Thanks for all you do. I’ve been watching ever since you started your channel. Love your content! 🚘
WOW thats very expensive, but great explaining through the build of this Axle set.
Good materials and precise machining cost money. Axles looks sweet.
That truck is going to be bad ass all over again !
RCSparks is the reason i have started the hobby
I love the build videos like this since I know i will not be getting the parts for a while but it is very entertaining. And it helps me when I rebuild my trucks. Please keep up the great work.
Still watching bro... Even tho I'll probably never build one, very informative stuff
great video and I really enjoy you putting that monster together step by step.