Finally got it up and running. The only delays we had was because we realized we needed some extra parts (I’ll list that below) th-cam.com/users/postUgkxihMYiJNXcHdbH-7ihymsLz61l7jVyb5O . So we have a loft where our current hvac just couldn’t seem to keep cool during the summer. We have been using a window unit since we bought this house over 6 years ago (all the houses in this neighborhood were built in the 80’s and majority of the houses built like ours use a window unit). I hate window units because they are just so noisy and the one we had really only cools one side of the loft. I had contemplated upgrading our current HVAC, but with all the rising prices these days, it would take years before saving up enough to do that. With the advice of my father-in-law (used to run an HVAC business), he recommended we get an inverter instead. We thought we bought everything we needed, but there were just a few other parts we didn’t anticipate needing (which is what caused most of our delay). My friend and father-in-law did all the work to get it installed and running and now we have nice cool air circulating nicely throughout the entire loft. It is very quiet and even the outside unit is much quieter than our main HVAC unit. Saved ourselves thousands getting this.
Just so you know you drilled the hole on the wrong side. If you ever need to service the evap head you won't be able to pull the head away from the wall.
It doesn't actually make a difference what side the hole is on 🙂 if you are going to pull it off the wall, you'll have to disconnect the refrigeration pipes anyway 🙂
Y que pasó con la bomba de vacío para sacar la humedad de la cañeria y el manometro para estar seguro de la presión adecuada? Y como le harás la mantención después con esos equipos tan pegados a la pared???, Y los desagüe se los llevaron en la camioneta?...
Any videos on how to replace a compressor on these units or simar units like this one ..my air conditioner isn't letting out really cold air so I'm assuming the gas in compressor needs refill or replaced the unit is about 7 years old and only been used mostly in the summer doest the compressor be in the unit inside or the fan on the outside?
@@mountainklima5602 ,if inside unit is under from the outside is nessesary oil trap for the machine to work good for long time.this will have problems after years
@@dadosdados47 Because R-410A and POE oil mix so well together, oil-trap installation is generally not required on R-410A systems. However, technicians should always be sure to seal refriger- ant lines by crimping them closed and brazing them if they will be exposed to the atmosphere for any length of time.When an HVAC system uses POE (Polyolester) oil, which is typical of current R410a systems, suction oil traps are not required* because POE is miscible in R410a in all phases (liquid, saturated liquid and vapor)
Olá amigos, ótimo trabalho parabéns. Só uma dúvida, midea não tem um mínimo de Tubulação para ser executado a instalação.? Forte abraço amigos trabalho de vocês é excelente parabéns
Outro detalhe que achei incoerente é essa tubulação sendo curva 90⁰ após atravessar a parede na prática roda vez que for necessário retirar o aparelho para preventiva terá que desfazer essa curva o que num futuro não tão distante causará a quebra da tubulação,pelo menos eu não gosto de instalar dessa maneira
Uma das piores práticas de instalação, pensando em garantia do equipamento e manutenção... instalação sem respeitar a distância mínima, e ainda dobra o tubo da maquina pra fora, numa manutenção precisa desinstalar o equipamento e ainda corre o risco de trinca na tubulação da evaporadora, muito ruim, pensando em acabamento não a o que se discutir, mas qualidade técnica ai... é 0.
I need to lift my sinking house but my outdoor unit is placed on the ground. Do I absolutely need to decommission the outdoor unit before lifting the wall? I only need to lift the wall by 7cm or max 10cm. Can I just lift the outdoor unit slowly as I lift the wall?
Надеюсь google translate поможет тебе прочесть. Если позволяет длинна медной трубки, то ты можешь аккуратно перенести его выше, лучше делать это с напарником, но лучше вызови профессионалов .
Buenas noches que lastima de hechar a perder la fachada del edificio poniendo los compresores ahí está muy fácil subirlos al azotea de la vivienda y el sacar los tubos de la línea de frío por el lado de la derecha como que no es lo más correcto.
Single zone systems are the easier to install. Even a child can do it. Try installing a multizone like one that supports up to 8 IDUs. I am a homeowner and just done installing a 5 tons LG multizone, in a 4000 sq ft commercial steel building that is my hobby garage. I don't trust any professionals. I bought my first mini split back in late 90s in US when there was none other brand beside Mitsubishi Mr. Slim. Today, LG is way ahead.
@@oliveii_1391 e mundial 😂 😂 😂 😂 😂 aqui o lema é o importante gelar, lá tmb 😂 😂 😂 😂 no investimento que eles tem pelo menos o mínimo deveria ter de Tubulação
Varia de marca pra marca alguns são 03 metros outro 02 mts outros acima de 04mts importante é gelar o.probelma não a tubulação é sim o excesso de gás que fica na máquina pra distância de tubos a menos
Poco más y conectan directamente la tubería que viene del Split la compresor, a eso se le llama ahorrar tubería y además por el lado derecho en vez de por la izquierda para posibles averías y mantenimientos...
Sorry brother wrong installation. You should make that hole in left side of indoor unit wall . You only thinking about installation, what about future servicing , if we need to remove ac again we have to break the wall again.
Todo muy lindo, pero se olvidan que el aceite del compresor va a ir directamente a la unidad interna, haciendo que el rendimiento del equipo no sea el optimo, ademas de no cumplir con las reglas de intalacion de cañeria minima de 3 metros, segun manual....... Todo muy lindo muchachos, pero......
Finally got it up and running. The only delays we had was because we realized we needed some extra parts (I’ll list that below) th-cam.com/users/postUgkxihMYiJNXcHdbH-7ihymsLz61l7jVyb5O . So we have a loft where our current hvac just couldn’t seem to keep cool during the summer. We have been using a window unit since we bought this house over 6 years ago (all the houses in this neighborhood were built in the 80’s and majority of the houses built like ours use a window unit). I hate window units because they are just so noisy and the one we had really only cools one side of the loft. I had contemplated upgrading our current HVAC, but with all the rising prices these days, it would take years before saving up enough to do that. With the advice of my father-in-law (used to run an HVAC business), he recommended we get an inverter instead. We thought we bought everything we needed, but there were just a few other parts we didn’t anticipate needing (which is what caused most of our delay). My friend and father-in-law did all the work to get it installed and running and now we have nice cool air circulating nicely throughout the entire loft. It is very quiet and even the outside unit is much quieter than our main HVAC unit. Saved ourselves thousands getting this.
8😊pgtu p8 1:36 to get
I remember reading in the manual that you should have 3 meters minimum line length. So it's alright to go shorter?
Yes, but you must reduce the refrigerant. a short line is not recommended because it could transfer noises from the outdoor unit to the indoor unit.
2meters.
Muchas teorías, si se corta la tubería o no.. La estética de la instalación es espectacular con la tubería exacta.
Min 2 meter
2 m min
❤❤❤Greetings from the air conditioner manufacturer from China
Great job. Could you please tell me who sells the articulated cable trunking in europe that they put in the exterior unit?
good technician doing perfect work in proper way
Good technicians don't work on ladders, platform ladders are for that..
Gut 👍
Have you ever install multi split before?
Hi. Best regards, refrigeration and air conditioning technicians. Greetings from Indonesian technicians.
makasih maseh, mongo mongo, hati hati, sampai jumpa,nasi goreng, sate sate
Just so you know you drilled the hole on the wrong side. If you ever need to service the evap head you won't be able to pull the head away from the wall.
I know what you mean , but the wall is very slim , you can check it from the outside you can see it in 1;21 it comes out
no
Get 60cm pipping. Nice.
It doesn't actually make a difference what side the hole is on 🙂 if you are going to pull it off the wall, you'll have to disconnect the refrigeration pipes anyway 🙂
@@thewiringhub You are right
Amizing,. But why the excletr of Elictrical down with outdoor, when u serviceing the unit the water can demage it,.
Y que pasó con la bomba de vacío para sacar la humedad de la cañeria y el manometro para estar seguro de la presión adecuada? Y como le harás la mantención después con esos equipos tan pegados a la pared???, Y los desagüe se los llevaron en la camioneta?...
Sieht schob nice aus. Aber warum nicht auf‘s Dach mit den AG‘s?
Nice installation 👍 I am from Punjab. 🇮🇳
Good working where are you from
Their like a useful version of a scientist
Any videos on how to replace a compressor on these units or simar units like this one ..my air conditioner isn't letting out really cold air so I'm assuming the gas in compressor needs refill or replaced the unit is about 7 years old and only been used mostly in the summer doest the compressor be in the unit inside or the fan on the outside?
Do you recover refrigerant when you cut the line set?
Need job ac am ac mechanic plis
Hai Good Morning Super Ac fitings Super job Super idea Super Spead work 👍👍👍👍👍👌👌👌👌👌
Why don't you put the external machines on the roof, where you don't see them.?
Muy bueno el video, con profesionales mejor. Enhorabuena
Without oil trap and 3m steel pipe and without vacuum pump?why?
The lines come prefilled with refrigerant
you dont need oil traps for r410 unless the 2 units are very high apart
@@mountainklima5602 ,if inside unit is under from the outside is nessesary oil trap for the machine to work good for long time.this will have problems after years
@@dadosdados47 Because R-410A and POE oil mix so well together, oil-trap installation is generally not required on R-410A systems. However, technicians should always be sure to seal refriger- ant lines by crimping them closed and brazing them if they will be exposed to the atmosphere for any length of time.When an HVAC system uses POE (Polyolester) oil, which is typical of current R410a systems, suction oil traps are not required* because POE is miscible in R410a in all phases (liquid, saturated liquid and vapor)
@@mountainklima5602 in your world these maybe exists,not mine friend!
They're so professional and handsome👍
Olá amigos, ótimo trabalho parabéns. Só uma dúvida, midea não tem um mínimo de Tubulação para ser executado a instalação.?
Forte abraço amigos trabalho de vocês é excelente parabéns
Cara Pensei a mesma coisa duvido que ali tenha 3 metros mínimo
@@micboy22 tem 50 cm 😂 😂 😂 😂 mas...
Outro detalhe que achei incoerente é essa tubulação sendo curva 90⁰ após atravessar a parede na prática roda vez que for necessário retirar o aparelho para preventiva terá que desfazer essa curva o que num futuro não tão distante causará a quebra da tubulação,pelo menos eu não gosto de instalar dessa maneira
Uma das piores práticas de instalação, pensando em garantia do equipamento e manutenção... instalação sem respeitar a distância mínima, e ainda dobra o tubo da maquina pra fora, numa manutenção precisa desinstalar o equipamento e ainda corre o risco de trinca na tubulação da evaporadora, muito ruim, pensando em acabamento não a o que se discutir, mas qualidade técnica ai... é 0.
@@rodrigooliveira5034 можно за паять
Una consulta dónde están los 3 metros de tubería que pide como mínimo el fabricante
Parece que não tem. Ou possa ser que as normas do fabricante mude 😬😬
Hasankhan
Para que o que igual mejor así
Por donde avacua el agua del compresor🤭a tuti pley, ni los mas profesionales son profesionales, menuda caca
Y dejar la caja de corriente justo por donde tira el agua el compresor
I like it. This house was very nice. But now it si perfect 😍
It is recommended to use at least 3 meters of pipe. Why didn't you use it?
great work 👍👏
Great work technicians. Come and see how indian ac technicians work ridiculously.
May the God give you the strength.
Neat job. I guess electrician have to supply power to the disconnect switch box.
One observation: the copper tubes between evaporator and condenser less than 3 meters and connection out side.
pense en lo mismo
for some ac it can work at 2 meter minimum, but this is less than that, it's about 1.5 meter i dont know is it ok for the ac or not
Arent you supposed to have at least 10ft of lineset? Also not a fan of suspended condensers
I need to lift my sinking house but my outdoor unit is placed on the ground. Do I absolutely need to decommission the outdoor unit before lifting the wall? I only need to lift the wall by 7cm or max 10cm. Can I just lift the outdoor unit slowly as I lift the wall?
Надеюсь google translate поможет тебе прочесть. Если позволяет длинна медной трубки, то ты можешь аккуратно перенести его выше, лучше делать это с напарником, но лучше вызови профессионалов .
Why breaker is installed below the condenser? not beside..
Why do they install the aircon next ton the window and doors.
Great Work You My Teacher👍
Your work good finished
Buenas noches que lastima de hechar a perder la fachada del edificio poniendo los compresores ahí está muy fácil subirlos al azotea de la vivienda y el sacar los tubos de la línea de frío por el lado de la derecha como que no es lo más correcto.
Por la izquierda es un poco mas tardado
Pero es mas facil para desmontar
La unidad en caso de necesitar mantenimiento
👍
Which country? The sky is so pretty
Nice work , Love it … where did you purchase work shirts from?
Terrible laburo lo único que faltó o no grabaron fue el vacío al equipo
Hello, how long did it take to install both air conditioners
Single zone systems are the easier to install. Even a child can do it. Try installing a multizone like one that supports up to 8 IDUs. I am a homeowner and just done installing a 5 tons LG multizone, in a 4000 sq ft commercial steel building that is my hobby garage. I don't trust any professionals. I bought my first mini split back in late 90s in US when there was none other brand beside Mitsubishi Mr. Slim. Today, LG is way ahead.
No respetan los 3 metros de cañería que piden por garantia
Cómo así??, explica eso.
Achei que apenas no Brasil que não respeitavam, isso é no mundo todo.
@@oliveii_1391 e mundial 😂 😂 😂 😂 😂 aqui o lema é o importante gelar, lá tmb 😂 😂 😂 😂 no investimento que eles tem pelo menos o mínimo deveria ter de Tubulação
Varia de marca pra marca alguns são 03 metros outro 02 mts outros acima de 04mts importante é gelar o.probelma não a tubulação é sim o excesso de gás que fica na máquina pra distância de tubos a menos
good work.what the flexible air conditioner channel?thx
Very good finishing
I manometri abbiamo visto ma nn abbiamo visto cm avete fatto il vuoto all'interno dell'impianto
What is the tool used to make that hole
Ur work super 🙏
Not super
Poco más y conectan directamente la tubería que viene del Split la compresor, a eso se le llama ahorrar tubería y además por el lado derecho en vez de por la izquierda para posibles averías y mantenimientos...
El caso es llorar
Saludos cordiales colegas
Yo Realizó o hago el pasado de las CAÑERÍAS de gas y líquido x el lado izquierdo
Ojo pará poder dar el buen mantenimiento
La tubulacion no está curta?
An excellent and Beauty installation
There is no minimum 3 meters of copper pipe? Work no good
Very neet and clean work
Sorry brother wrong installation. You should make that hole in left side of indoor unit wall . You only thinking about installation, what about future servicing , if we need to remove ac again we have to break the wall again.
pro,nice teamwork
Great install just needs to upload Timelapse on how the mold grows inside the head units over the years.
Hi bro , where it’s the compay ?
The copper tube is below 10ft. which is causing a substandard flow of refrigerant...thats not good for the aircon unit.
Wow I just need where someone is installing
Great Job, Nice Powertools
Not happy on the isolator under the outdoor unit
Heating mode water drip what's next
Bravi colleghi...saluti da italia
Nice house with nice color and stone that are totaly ruined by this... Why not putting the ouside unit on the flat roof ?
Why like that always outside flare nut defficult miantenace for do general service..install very easi maintenance problem
how much does a split install like this cost? what country?
My question also
Very good work 👍
Nice work 👍
Very nice job....
Perfect finishing
I need this drill machine and need round wall bit
Isolater switch should be away from outdoor unite because if you wash the unite the water will effect the switch.
Safety first
no
That depends if your isolater switch is waterproof or not 😉
It’s in a wheather proof box that’s designed to prevent moisture from affecting the inner works.
I’d like to know what the customers have to say about this brand ?
Good luck and God bless
is this for like a rent home?
The electric box right under the unit where condense... very smart..🤭🤭.
Another deficiency. Warranty avoid.
Good job ❤️
Gutes 👍 Video danke
Why not multisplit?
Good job
Good work sir
Apologies, behind the outdoor unit need to hawe one circle ⭕️ and then you conekt the instalation.
I want to see a video of multiple zone installations
Do you install ventilation systems?
Which drill machine used
Is that fast or fast forward.?
Midea or Daikin? Which do you prefer?
Which one you bought?
@@AexoeroV tosot in the end 😂
Looks like professional
Excellent Great Work
What model of air conditioning is it ?
What price of one ac installation?
how to service outdoor if ur ac power box under outdoor 😇 and conditions minimum 3 metres coper pipe...😂
Why put machine so high?
Hubieran puesto las condensadoras en el techo, le quitaron la vista a los acabados de la casa.
Good friends. You know that if you cut the air conditioning pipe, it automatically loses warranty.
Very clean and neat
👍
Its been years I haven't see trunking like those
Nice work
Porq le sacan el frente y el deflector en tantisimos aires colocados por mi nunca hice eso me parece muy tonto
I know it was the landlord choice but it was so close to be install on the roof and out of sight why not?!!😊
How to apply i am interested im aircon techniciann 4years grad in HVAC-RT
Todo muy lindo, pero se olvidan que el aceite del compresor va a ir directamente a la unidad interna, haciendo que el rendimiento del equipo no sea el optimo, ademas de no cumplir con las reglas de intalacion de cañeria minima de 3 metros, segun manual....... Todo muy lindo muchachos, pero......