How to Install a Fzone Pro Series Dual Stage Co2 Regulator
ฝัง
- เผยแพร่เมื่อ 21 มิ.ย. 2020
- Here is a how to video of me installing the Fzone Pro Series Regulator. They were kind enough to send me their newest co2 regulator that is made specifically for side open co2 tanks.
Please let me know what you think in the comments below. If you have any questions related to this regulator, feel free to ask.
If you haven't watched my other video, I did a tutorial on their smaller regulator that I used on my paintball tank which I've been very happy with.
【My Other Regulator Video】
• How to install Fzone r...
If you decide to purchase one, please use my affiliate link, it would help me out a lot
【Fzone Pro Series Regulator】
amzn.to/2NitBE5
As always,
Thanks for watching
【Follow Me】
/ modernaqua
【Music By】
Lukrembo - Cheese
/ lukrembo - แนวปฏิบัติและการใช้ชีวิต
looking good!
Loved the editing...crisp and clean, I use an FZONE regular also :)
Thank you!
Thanks bro I'll use your link... what brand of check valve is that? some say its not meant for co2?
Which way round should the white plastic washer go? Does the side with the groove face towards the gas bottle, or the other way?
If you need to add or remove the bubble counter blocks, do it carefully. I broke off a screw by tightening too much with the hex allen wrench.
Did you strip the hex screw? Thanks for the heads up
@@officialmodernaqua The screw broke in half and is stuck in the solenoid block. Yeah, Just tighten enough, don't over tighten.
Bonjour ou trouver le kit complet avec bouteille électro vanne etc merci
Thanks for answering my question about the additional check valve. Do u just buy a cheap check valve from pet store?
No problem, that will work. That's what I use.
Modern Aqua thank you. I was looking into this fzone model you’re using. Someone said to invest in some clippard check valve but I couldn’t find the correct barb. So now I can feel better about using a regular plastic check valve.
do you shut everything down before putting the power on? The needle valve seemed to be releasing some bubbles before you adjusted it. Do you shut down the needle valve all the way before power on or do leave it slightly open?
That was probably a tiny air pocket inside the needle valve from filling up the water. I don't think it was a leak. Hope that helps
Everything was closed off at the beginning
@@officialmodernaqua Thank you. I watched your video before installing mine. everything went smoothly!
@@gio6627 I'm glad the video helped! Let me know if you have other questions, mine has been running flawlessly
So just to be clear, you can easily attach two tanks here, right? No additional equipment will be necessary.
Correct, you'll need additional airtubing and check valve of course
@@officialmodernaqua Awesome. Thank you for replying. I see that this one can be extended if you have more tanks. Where can I buy that?
So bad, lack of directions
Over kill and over priced. Keep it simple.