ฝัง
- เผยแพร่เมื่อ 1 ก.พ. 2024
- This is the introduction video of the camera and it also contains the actual DVR from the first 2 flight.
If you want please join my channel to get access to exclusive posts and updates:
/ @mariofpv
OpenIPC SSC338Q-IMX415, the camera that is on the drone, can encode up to 120fps or 3K 30fps!
All features from the large original camera are available in this micro camera!
OpenIPC FPV is the cheapest digital FPV system in the world!
Thanks to the WFB-ng link it has some serious long range capabilities.
Read more here: openipc.org/
You will find everything you need to start your own project!🎉
This is the moment you’ve been waiting for!
Pre-orders are now OPEN!
You might wanna hurry up because the first batch is only 100pcs.
store.openipc.org/
Enter your real data, because they must match the payer and recipient.
The system supports MAVLINK1 or MAVLINK2 bidirectional telemetry which makes it a complete solution for a quadcopter or fixed wing/VTOL. It also has WFB-ng link preinstalled and this means it has serious long range capabilities.
More information about this awesome OpenIPC camera will be in following videos so make sure you subscribe to not miss them!❤️
Please feel free to join our fast growing community:
t.me/EZWBC
You can also join our official OpenIPC facebook group:
/ 956912811789726
Massive thanks to Kenny Plus for his creation!👏
Uploaded a small sample of uncompressed video: drive.google.com/file/d/1d_mY...
Diatone Roma L3 Micro quad setup:
Frame: Diatone Roma L3 Quadcopter
Flight controller: Kakute F7 Mini V3
GPS: Matek GPS & Compass Module M8Q-5883
Propellers: Avan Mini 3 Inch Propeller Clear
ESC: Diatone Mamba F35 35A BLheli_S 4in1 ESC (3-6S)
Motors: Emax RS1306B V2 Motor - 4000KV
Receiver: Frsky R9 MX with ExpressLRS telemetry firmware
Firmware: INAV 7.0
Music:
EDM Detection Mode by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/...
Source: incompetech.com/music/royalty-...
Artist: incompetech.com/ - วิทยาศาสตร์และเทคโนโลยี
![เก่งแต่ลับหลัง (FINSTA) - ส้ม มารี (Zom Marie) Ft. Punch 4EVE [Official MV]](http://i.ytimg.com/vi/OOolBU2aC70/mqdefault.jpg)
Eagerly waiting for the drop. Let me know if you need help with anything on the logistics and or funding side, this project needs to succeed for the sake of FPV. here to support 100%
First batch will be only 100 pieces. I know, that’s very low… they will vanish in seconds. There will be more upcoming batches. Cheers mate!😊🍻
@@mariofpv they have a website top buy
They have a website to buy
@@mariofpvI’m sure the Chinese companies are banging on your door for this and probably would love getting it for nothing. Don’t let that happen. Make sure you are paid and paid well.
@@ChristopherF_1971absolutely and ensure that you get a royalty for each sold.
I've been asking everyone why there isn't an affordable open source FPV solution and then discovered this yesterday. Very excited.
Stay tuned because there are more awesome news coming soon. Cheers mate!😊🍻
Was thinking cctv got wifi why so expensive and find openipc lol
I can sense a shift in the balance of HD FPV systems. What a time to be alive! Looking forward to seeing more progress - and perhaps on the shelves someday ;)
There are already major fpv manufacturers that are involved. I can’t say more. Cheers mate!😊🍻
@@mariofpv this is getting really exciting man!!! you got this! cheers too mate 🍻
Ill be buying this. This has to be the biggest breakthrough after ELRS.
Cheers mate!😊🍻
Happy to see so much of the community coming behind this!! Will definitely pre-order one.
We are targeting March. Cheers mate!😊🍻
I really want to see that project getting better. Amazing job man
Thank you so much for your support! You motivate us to work harder for the community!😊🤝🙏
I have been following your project for a long time. Fantastic. I am speechless. Good luck
Cheers mate!😊🍻
Great to see it worked all out, I was here since the first working prototypes and I welcome every new user ❤
With more people the price will come down and the product will get better.
Cheers mate!😊🍻
Im so pumped. Watching like a hawk for announcements 😊
Thank you so much for the support! You motivate us to work harder!😊🤝🙏
Extraordinary ! Amazing miniaturization for OpenIPC FPV !
Thank you for all the support my friend!😊🙏
It was my birthday, I've just spent 170$ on FC, ESC, frame, motors, props, receiver trying to build my first drone for medium-long range. I have left like
50*$ for the fpv system and I've been searching ever since for a solution till I came across this. I instantly became a member to support it. 🥳
Thank you so much for the support! 😊🍻🙏
Well done Brilliant, following since you stated, keep going it’s so good how you have created this system by yourself!!
The whole OpenIPC team created this, not just me. Cheers mate!😊🍻
@@mariofpv So how many are there of you doing this project??
@TopCrinkly68 please have a look in the website. There is a link of the team.
This is amazing, I'd love to try this out sometime soon!
Friendly advice... I think TH-cam's compression is have a negative affect on your flight footage. I found if you upscale your videos to 1440p (or higher) the compressions algorithm for TH-cam is better and doesn't artifact in the same way it does at 1080p.
I will upload the raw DVR tomorrow on Google drive and post a link here. We are targeting March if all goes well. Cheers mate!😊🍻
I like the parts of the video with the OSD on it cause I like the technical data. Very impressive!
Cheers mate!😊🍻
@@mariofpv I know I'm just a random youtuber, but I think it would be interesting for an apples and pears sort of side by side comparison with hdzero or dji for specs or quality. I really am interested in this cause it seems like you're up there in the right area with the heavyweights but when I look online the info is quite scarce. You're pulling 3MP video low-medium range in an fpv format. That's really quite an amazing feat. I would defo be interested for somebody knowledgable to break it down. What do you think? I'd donate to that too.
YES! Congrats. So excited for this
Cheers mate!😊🍻
Awesome. I'm excited!
Thank you for your support!😊🤝🙏
Skyzone wants to create goggles for this.
There are already some major fpv manufacturers who are working with our team. We can’t say anything now but soon we will have some exciting news. Cheers mate!😊🍻
@@mariofpvso THAT'S why caddx made VRX board removable in their new goggles!
@@remainsmemories626oh boy do I hope that's the case! :)
@@remainsmemories626Highly doubt that. The whole point of Caddx is to sell the board/camera in the VTXs.
@@DavidTaghehchianI just hope those involved in OpenIPC get paid what they deserve. Sick of seeing these Chinese players getting rich off everyone else’s hard work.
Wonderful, can't wait to buy it❤
We are targeting March. Cheers mate!😊🍻
Damn, puts a huge smile to my face, made my day...
Wait to see the next one… 🎉
Cheers mate!😊🍻
Crazy wonderful work Mario!
White on white Dunks... Gangster!
Cheers mate!😊🍻
so cool!! cant want to hear more on this
Cheers mate!😊🍻
Mario, this just keeps getting better and better. Well done once again! Could you give us more info on the latency on the system? Is it low enough to freestyle with?
The lowest possible latency is ~35ms and it is absolutely fine for freestyle. Unfortunately I am not a pro freestyle pilot and I am too busy with testing and development. I also have a day job, lol. So yeah I can’t feel any latency just like I couldn’t feel latency of the DJI FPV system that I already have. The fpv racers would probably feel the latency but their brains work in much faster Hz I guess.😁
Cheers mate!😊🍻
@@mariofpv Thanks for the reply. What settings do you use to get 35ms latency? This is exciting for people who can't afford HD. I have been keenly following your progress.
@an_R_key 720p 120fps 4Mbps h265 cbr on the camera side and Orange Pi 5 with 144Hz monitor on the Ground Station. You need fast decoder to achieve low latency. The camera is only a piece of the puzzle, always remember that. We are offering that one key piece of that puzzle but you will also need the rest to complete it. Makes sense?😊
@@mariofpvSo the camera encodes the video in IP stream and sends it to the VTX ? And what software are you running on the VTX ?
Awesome work!
Cheers mate!😊🍻
very nice, looking forward to the first product release. It would be great to reach 1W with a proper CNC metal case for cooling
We are testing lightweight heatsink because at max output power it gets REALLY hot and it will burn eventually. If you take off fast after plug the battery it’s fine. But if you stay for a few minutes waiting for GPS loc for example the power amplifier will burn in max output power. We’ll see. Cheers mate!😊🍻
@@mariofpv Pit mode might help with that. Agree with original poster, this is a really exciting development!
@@mariofpv That is true, happy to hear that this is already in the works. I think we all know 25mW or pit mode in good old analogue VTXs that resolved this issue, realistically though the pilot doesn't need to blast 1W right from the start. It's also not smart way of using battery, only at longer distances (>1km) this is required perhaps.
And then everyone will ask for 1200mW.🤣
@@mariofpv Why stop there?!! I want my vtx to have so much tx power it instantly blows through my 6s battery and I don't even have time to fly.
Waiting for you guys to make my setup digital and unbeatable at this cost...Lots of Love from Indian Flying Community(IFC)
Greetings from London! Cheers mate!😊🍻
thanks you so much! that overall greed is so bad - you gonna fix that and you deserve a lot of thank youuuuuus! thank you!
Cheers mate!😊🍻
Im so glad flight info in drone world is metric 😊
Cheers mate!😊🍻
Good luck bro! We cheer for you
Cheers mate!😊🍻
The future of digital fpv. ❤
Exactly. Finally we have open source digital fpv! Cheers mate!😊🍻
can't wait 👍
Cheers mate!😊🍻
Nice! Can't wait until this is available. Any idea on the price point of the hardware yet?
We are targeting March if all goes well. We will see about the price. Cheers mate!😊🍻
Nice work🎉
Cheers mate!😊🍻
Awesome!!!! How tiny this is and great the quality is. RESPECT!
By the way if you wonder why boots my Notebook so slow, clean your Desktop and put the Files in Folders and Name it.
The size is just 25mmx25mm. Cheers mate!😊🍻
Keep up the good work 👍
Thank you so much for your support!😊🤝🙏
Hope I'll be able to buy one or two for testing!
Cheers mate!😊🍻
Holy crap.
Yeah you basically built exactly what I was working on. Sign me up for a copy in a batch.
We are targeting March. Stay tuned. Cheers mate!😊🍻
That's amazing
Cheers mate!😊🍻
Hi Mario, This is great work ! What type of Antenna setup you have on your quad and on your goggle? I don't see any omni antenna on your quad. What would be a preferred polarization for this system?
I used cheap dipole antennas but of course I will upgrade them to lollipop LHCP. I will also upgrade my simple antennas on the VRX and add a second WiFi adapter for more bitrate. Lots of room for improvement. Cheers mate!😊🍻
Great video! From where did you source the SSC338Q chip?
We will start selling the new hardware next month if all goes well. Cheers mate!😊🍻
Im so impressed with what you've done, is it possible the board to received video input from other camera like old analog fpv camera with output hdmi/rca ?
We are using specific sensors and we have modified the drivers of those sensors as well in order to work with OpenIPC standards. Therefore old analog cameras will not work. You can find the source code on our GitHub to learn more technical information. Cheers mate!😊🍻
It's great!
Cheers mate!😊🍻
Well done mate! When is this gonna be available in the market?
We are targeting March. Cheers mate!😊🍻
Due to vibrations on drone I'd suggest adding a bit of epoxy to secure mipi cable. Nice work. Did you design this board and fab yourself ?
This board is a collaboration of the OpenIPC team. We are many members and I am one of them. Cheers mate!😊🍻
its an interesting proyect, i always find the image a bit blurry, like it lakes bitrate or so, but still acceptable. Does it use h265 or how its encoded the image?
Yes it supports h265. Currently we are doing the testings in low bitrate (4Mbps) but we can reach up to 52Mbps total bitrate! We will get to that in future videos. One thing at a time. Cheers mate!😊🍻
@@mariofpvyou can reach 52mbits??
Nice work! Is the ethernet port really needed for debugging? Or can wireless be possible in future firmware?
For now we use wired network for internet access to sysupgrade and modify settings. A lot of things will change in the following months. Cheers mate!😊🍻
Cheers! I am wondering how you've got hands on Sigmastar datasheets and BSP image - it is not freely available as far as I know. Anyway, considering the technology stack which you are using, this is really impressive job! Well done!
Well, sorry but I can’t release those information yet. Let’s say we have our “inside” people. Cheers mate!😊🍻
This looks really nice. I like the weight. So it gets digital quality and it's about 23 grams lighter than the DJI 03 air unit system? I had a few questions. I guess you need a radio receiver? Also what goggles will work with it? And does it have any over heating issues? Like how long can it sit before you need to take off? And will it shut off if it over heats?
Any goggles with HDMI IN port.
I have already posted a VRX video tutorial.
No overheating issues while flying.
On the bench always use a fan.
I tested it for 2 minutes and it got hot but didn’t shutdown.
Cheers mate!😊🍻
Nice!!!! Are you near to announcing dates and numbers??
We are targeting March if all goes well. Cheers mate!😊🍻
@@mariofpv Nice! March is when my orange pi board will reach here, for my x-real glasses. Should be super sweet to get this running on those glasses. They do 120fps too.
@@saidinesh5orange pi ca Output 120hz HDMI?
@@haschkatze8372 the datasheet says it can input 1080p120 hdmi , output upto 8k60 h264 video decoding, and has display port 1.3 ... i am waiting to see if there are any additional limitations on top of this .. i know for sure it does 4k60.
Looking forward to seeing your testings!
10g for thenlens only. Wow! Regardless, it's amazing progress!
I’m expecting a CADDX Polar case and lens which fits perfectly with the sensor. Cheers mate!😊🍻
This is a dream coning true. chhers mate ❤🔥
Cheers mate!😊🍻
Hi Mario, you guys are doing awesome work, and I can't wait to see more. Keep going brother!
I would like to contribute by being a member aswell
Can you explain how can I be a member?
Have a look at the source code in our GitHub. Start contributing with PR. Cheers mate!😊🍻
Im about to jump to digital and this looks fun but i suck at programming..hopefully it gets easier i had a tough time when i first went to elrs..
The camera is bind and fly. If you want to change settings use the OpenIPC Configurator. The only tricky part is the VRX. There’s a great tutorial by CurryKitten that explains how to setup the NVR(VRX). As an open source it’s non stop expanding and improving. In the future we are expecting hardware from major fpv manufacturers. Cheers mate!😊🍻
7 grams! Flipping amazing.
Cheers mate!😊🍻
Wish the project all the best. Hopefully We could come up witha better RF hardware other than USB based for better latency and BW.
We can work on that after we release the first camera. Cheers mate!😊🍻
Amazing work! 😮❤ Is there an option to download gerber files and build one? Where should I look?
Not for now. Cheers mate!😊🍻
Is it smells wifi packages like WFB-ng ? Or will we connect to the network created by the camera like a wireless IP camera?
It has WFB-ng as usual. Cheers mate!😊🍻
can this record locally to the air unit? if so, can the picture being sent to the goggles be 720p and the recording res be 3k?
I don’t know. I did a quick test on the bench and I was able to record on the onboard SD card for a few seconds. I still need to add source code to enable/disable remotely this function. Cheers mate!😊🍻
Looks very interesting, Any test on latency?
Please have a look at the Community section. I have already posted some photos. Cheers mate!😊🍻
Gyroflow support will be good for this cam 😊
There are plans to add a gyro in future releases. Cheers mate!😊🍻
This is looking awesome! Is it a custom board too?
Yes. Fully custom. It’s called OpenIPC FPV single board and it’s an AIO Air Unit. Cheers mate!😊🍻
@@mariofpv Oooo I'm excited to find out how to get my hands on one. This is super cool dude!
great! is there usb input to solder usb cams?
Hmmm maybe we could add a 2x USB HUB but in a future release. Anything is possible since we own the hardware! Cheers mate!😊🍻
Excellent, it also works for analog or only for digital.
It’s a digital FPV system. Cheers mate!😊🍻
Amazing
Cheers mate!😊🍻
@@mariofpv Cheers! 🍻
Can a PC be a ground station? e.g. receive video feed in my Windows laptop. If yes, what are install instructions? I see install instructions for Ubuntu on the website.
No. You need Ubuntu Linux laptop. Cheers mate!😊🍻
I am very interested in this. Is the micro sd slot for recording?
Yes. Onboard recording. Cheers mate!😊🍻
It doesn't has the tradditional RC stack dimensions, doesnt it? Was wondering because looks like stack, but no screws?
It has the traditional RC stack dimensions. 20x20
For toothpicks it also has 25.5x25.5
Cheers mate!😊🍻
OOOooooOOOooooOOOoooo, nice!
Cheers mate!😊🍻
Hey bro I’m new to Fpv so new that I have no idea if what I’m looking at is analog or digital. I do know that this must have taken a considerably long time and money and I respect that!!!! My question tho is is this a new digital system which will have its own goggles 😮
Welcome to the hobby! I think you should visit our GitHub wiki and read all the information there. You will find the link in the video description. Cheers mate!😊🍻
@@mariofpv thanks will do
Nice work!!
When you say that it has serious long range capabilities which distance do you think it could reach?
We have posted on Telegram a short video of 106km range! We can’t post it here for obvious reasons… Cheers mate!😊🍻
@@mariofpv sorry, but what are the obvious reasons?
@nic.h FAA?
@@mariofpv 107.31 can allow for long range flights. You'd need a mobile vlos spotter with solid comms though, which for the length of flight you are referring to could be logistically difficult to ensure. You can also apply for waivers, but it would need similar requirements to be accepted.
@@mariofpv Also telegram vs TH-cam doesn't really matter to the legality of the flight.
Is it possible to preorder one given the initial run is so small?
I don’t know yet. There are still issues to resolve. Cheers mate!😊🍻
Quality is great. Camera could be lighter 😆 but quality is awesome.
The v2 will be much more lightweight. Imagine the v5 how it will be. This camera is our first attempt and we will improve. Cheers mate!😊🍻
@@mariofpv yea I am so excited for this. Future stuff. Maybe a 2w long range HD system. Or on board at 2.7k .. who knows what the future holds
So will this also carry a telemetry link? Specifically Mavlink1/2?
Yes. Bidirectional. Cheers mate!😊🍻
@@mariofpv so does that mean the Ground station side of OpenIPC can handle RC over Mavlink? Guess I don’t fully understand the ground station setup.
Next, use the second SSC338Q CPU Core for the flight controller code? (onboard imu in the next revision?)
We are using both cores for encoding 120fps. We are pushing the hardware to the limits! Cheers mate!😊🍻
@@mariofpv Oh I just assumed the encoding was done with a hardware encoder nvm
It is hardware encoder and we use both cores.
Not sure why you put this video behind paywall, but ok. :D Anyways the unit looks great. Is some production planned and what would be the expected price? :)
I just wanted to give back something to the members of my channel. Thank you by the way for becoming one of them!❤️
We are targeting March (if all goes well). The price will be much cheaper than any other digital FPV system. After all OpenIPC is indeed the cheapest digital FPV system in the world and we are going to keep it that way. Thank you for the support!😊🤝🙏
@@mariofpvamazing!
From where can we buy these ? Would like to purchase some in the first batch
It’s not available yet. Cheers mate!😊🍻
What about delay? is fits DJI FPV system range 40ms ?
I have already posted photos on the Community section of my channel. Check them out. Cheers mate!😊🍻
Do you have a link to just the camera and cable? That way I can try it with my existing board so it'll fit in my drone, or any advice on a camera board that will fit in a 5 inch that's supported by the SigmaStar SSC338Q main board?
Sorry no it has already WiFi. This is ideal for 5” Cheers mate!😊🍻
@@mariofpv The camera already has wifi? I take it that any camera with an MPI camera connection will work with the base board?
I have a SigmaStar SSC338Q with a IMX415 and external wifi (a la currykitten's guide on the wiki), just can't fit the camera module into the drone at current
Looking forward to the release though Mario, super cool project
@user-si9fp6zs9u yes, exactly as I explained it. This is an SSC338Q camera + WiFi rtl8812au module ALL IN ONE (AIO) single board Air Unit.
@@mariofpv which is perfect and I'm really looking forward to getting one
but whats the camera sensor module you're using? Since the IMX415 board I have is big and doesn't mount nicely
i'm building a 7inch to run a test openipc setup until you release your AIO (and other future things), when I'll likely move other stuff over to openipc too
Guys lets get the word out lets knock on TH-camrs like Joshua Bardwell to do a rundown of this system. Lets make this the biggest revolution in FPV. Mario you are a Star ✨. Thank you. Let me know if I can support in any way.
Cheers mate!😊🍻
Very exciting times for micro pilots
Cheers mate!😊🍻
🔥🔥🔥
🎉🎉🎉Cheers mate!😊🍻
Hi I have a wifi enabled internet ip camera but I can't find debug pin. It have only btype connecter and ID,DM,DP,VBUS, OUTD1,OUTD2,Rst,OUTC1,OUTC2. HELP ME OUT how can I change internal software .
Please join to Telegram channel because it’s really hard to provide technical support from TH-cam. Cheers mate!😊🍻
Ok
You are really creative I admire you so much ❤
Cheers mate!😊🍻
Dios que maravilla es esaaaaa?
Yo quiero unoooo😂
Cheers mate!😊🍻
Just wondering ... What would be the range on these ?
At 1200mW one crazy pilot did 106km with large patch antennas on the ground station. Video sample on the Telegram link in the video description. Cheers mate!😊🍻
Hey, is it possible to become a tester? I'm very interested in this project and own several quads to test this with like long range, freestyle, cinewhoop and race quads. I'm primarily interested in using this for freestyle and cinematic 5 inch build since I think it is the best way to test this system and I think most people are looking for using this system for that. I'm following this project since the start and really like where this is going and I think this is the future for digital fpv.
Thank you so much for your support, it really means a lot to me! You are my motivation! In order to become a tester you need to understand the source code that we have on GitHub. We are happy to accept your PR and we may consider cooperation. Currently we have many members in our team and all of us are working every day for our project. Our vision is to have an open source digital fpv system available to everyone! Cheers mate!😊🍻🤝
@@mariofpvhey, I have looked deeper into the source code. I do understand some of the source code. But I'm afraid making changes would be too hard for me to do although I am motivated to learn more. Flying is my strongest point.
So at price point of 90$ what is the benefit over walksnail? Cheaper receiver?
Cheaper receiver, many options for receiver, none stop updates and improvements so it’s future proof, way more options and settings to choose from the settings, 3K and 4K live video stream, open source so you can modify it however you want it, creativity and learning opportunities for you.
If all these don’t matter to you then just buy an analog camera.
You will still be able to fly.
Our hobby is not just go out and fly, it’s much more than that.
Cheers mate!😊🍻
Thanks for your work, I’ll be back one day.
hi nice project. will there a way to order one board + camera?
We are targeting March. Cheers mate!😊🍻
where can we find it when you release the first batch?
We first need to create the first batch and pass a strict QC on every single part. Then we will give the link. Cheers mate!😊🍻
sick! can't wait!@@mariofpv
That looks like a power amplifier under the foam, I'm worried it will cook!
How did you guess it?
It did cook…. LOL
But no worries the final product will have different type of IPEX locks. Cheers mate!😊🍻
@@mariofpv I was just expecting a small heatsink then saw you add foam instead 🤣
Maybe a thick thermal pad would be the way to go to hold down the IPEX (and conduct the heat)
Wow! Where can we buy this aio vtx?
I mean this Aio air unit?
We are targeting March. Cheers mate!😊🍻
I need one !
Maybe for Valentine’s Day gift? lol
Hopefully they will be available in March. Cheers girl!😊🍻
@@mariofpvthis system is 5.8ghz or 2.4ghz ?
Both. You can set it in the settings. I use 5.8 because in London the 2.4 band is extremely noisy.
@@mariofpv Is gonna be cheaper than walksnail or DJI ?
whats the usage of two uarts?
One is for the MAVLINK telemetry and the second is for optical zoom lens control. Cheers mate!😊🍻
17g is wayyy to much for a tinywhoop, but I am sure you can make it lighter in the future, FPV needs this project.
I would still like to know about the latency.
10 grams is only the lens. The AU is 7 grams. We are building a nano camera to reduce even further the weight. Stay tuned for the next video. Cheers mate!😊🍻
@@mariofpv sounds great 👍️
Are there any other yt channels owned by devs involved that we should be subscribed to?
As an OpenIPC dev I can verify that my channel has the latest updates of the project. There are many other OpenIPC channels out there of course and please subscribe also to them because you never know what you might find on their channels! Maybe they will invent something that we haven’t yet. After all, it’s an open source project and the possibilities are endless. Cheers mate!😊🍻
mmm, interesting, what about the latency tho? full frame and first pixel
We tested full frame so far. ~35ms glass to glass. I posted photos on the Community section of my channel. Unfortunately I don’t have high frame-rate camera to measure the first pixel latency. But this is still in under construction state so expect many improvements and testings. Also keep in mind that it’s open source so many devs will start participating and improving the system. Cheers mate!😊🍻
Wow I cant wait. Any ideas on the price and latency?
The latency can be as low as ~35ms. We will announce the price soon. Cheers mate!😊🍻
@@mariofpv WOW I was expecting something bad but flyable like 150ms this is truly amazing stuff. Also what kind of range would u say you would get with this?
I can’t fly with latency higher than 100ms… the maximum range ever achieved was 106km. We posted a small video on our Telegram channel.
@@mariofpv OMG that's crazy
Excellent! Congrats! Where I can buy it?
Not available yet. Cheers mate!😊🍻
Could you provide the PCB project to DIY?@@mariofpv
The hardware is made by individuals who may share their work on our GitHub. I am not the creator of the hardware therefore I cannot share it.
What's latency like with 1080p60? Glass to glass? Does it vary much with distance due to intermittent packet loss? I have a water damage dead DJI mini 3 pro that I want to repower. If you'd like a remote tester I'd be keen to get involved and help split costs on beta hardware runs etc. 22 plus years of Linux experience and have run my own FOSS projects. Developing 33 years in numerous languages. :-)
50ms. For lowest possible latency you need to use 720p 120fps. Cheers mate!😊🍻
Interesting, I just got sent this link. I have made a similar board a few months ago and will Open Source it towards the end of Feb, that way we can just get China make them for the community so they are even cheaper. Your board has some mistakes, for example that PA is not going to last long, it will overheat, additionally my board has a gyro and runs a modified fork of OpenIPC that logs gyro data so can be used with GyroFlow. You should consider adding a gyro also to your hardware. My hold up now is on the software side, I am working to make OpenIPC much easier for regular FPV people to use.
We need to talk. 🤝
Please find me on Telegram or Facebook. Cheers mate!😊🍻
can it do 1s?
Sorry but no.