How to install molded mud flaps on a 2019-2022 RAV4.

I show in detail how to install molded mud flaps on a 2019-2022 RAV4 or RAV4 Hybrid. These are aftermarket mud flaps and they fit perfectly. They look very similar to OEM mud flaps but at a fraction of the cost.
The front mud flaps can be easily installed in about a minute by turning the wheels to give plenty of working room. The rear mud flaps can be easily installed with the help of a Tite-Reach tool. I'll list the link for it below. Worst case scenario would be to take a few minutes and remove the rear wheels to gain more access.
I hope this helps with anyone adding mud flaps on a RAV4 as this improves the looks a lot. It also provides protection to the side of the RAV4. Please feel free to ask me any questions.
Mudflap - www.amazon.com/dp/B07TZFV1LT?...
Tite-Reach Tool - www.amazon.com/dp/B004UBHRWO?...
Trim Removal Tools - www.amazon.com/GOOACC-Removal...
Thanks,
Jim

[@RobC9562]

Looks pretty easy, thanks for sharing

[@jimsgaragetoys]

Happy to help. It was a straight forward install.

[@Rambo900]

Thank you so much your video was very helpful.

[@jgt6008]

I'm glad it helped! Thanks for letting me know.

[@jimsgaragetoys]

I'm always happy when I can help out others!

[@selbimon]

thank you so much

[@jimsgaragetoys]

You are very welcome. I hope it helped!

[@chucklorikellum3431]

What is the tool called you used to pop off the top clip?

[@jimsgaragetoys]

A simple trim removal tool is all you need. Kits like this are available for less than $10 on Amazon. www.amazon.com/GOOACC-Removal-No-Scratch-Molding-Fastener/dp/B081LD5GNJ/ref=sr_1_17?crid=1889HVW2NTYU7&keywords=car%2Binterior%2Btrim%2Bremoval%2Btools&qid=1672890661&s=automotive&sprefix=interior%2Btrim%2Btool%2Cautomotive%2C208&sr=1-17&th=1

[@chucklorikellum3431]

Thank you!

[@jimsgaragetoys]

@@chucklorikellum3431 You're welcome

[@Cmflyer2044]

Can you name the tool 🧰 you used

[@jimsgaragetoys]

The link is in the description above.

[@raythemanroe]

I just did these last night on our 2023 SE, you left out the bottom bolt. Kinda important

[@jimsgaragetoys]

Not sure what you looked at but I clearly show the underside bolt and screw and I did install them.

[@robertg9334]

The rear required drill to make a couple pilot holes but luckily I just used a paint marker to mark out the drill spots after partial installation

[@lostvlog6857]

@@robertg9334 huh?