INTERIOR TOUR of DIY Camper - Ex-Army Unimog Expedition Vehicle Build
ฝัง
- เผยแพร่เมื่อ 30 มิ.ย. 2024
- 📺 WATCH the Unimog Camper build from the beginning :
bit.ly/3F7fhGO
Ex-Army UNIMOG U1700L Walk Around : • UNIMOG WALKAROUND - OU...
Completed UNIMOG EXTERIOR Walk around : • WALKAROUND - EX-ARMY U...
DIY Bed Lift System : • Affordable DIY Bed Lif...
💰 SAVE with our DISCOUNT code OUTFIT20 on MyGenerator www.mygenerator.com.au/
Use the code for some epic gear such as :
Enerdrive battery & electrical : bit.ly/3FJODpo
Truma Saphir Underbunk Air Conditioner : bit.ly/3wgcfiv
🏕 FREE $20 voucher on the best camping equipment on A247 - coupon OF20 a247.com.au/ap/TheOutFit
🚐 SUPPORT our DIY Expedition Vehicle adventures on PATREON
/ theoutfit
😎 REP our new Sticker - FREE Shipping
payhip.com/theoutfit
📧 COLLAB with us
theoutfitlife@gmail.com
📸 FOLLOW US on Instagram @the.out.fit
/ the.out.fit
🔔 SUBSCRIBE to follow our Australia overlanding adventures in our Mercedes Unimog U1700L : / theoutfit
00:00 Interior Walkthrough Intro
00:49 Materials Used
01:45 Clothing storage
04:19 Wetroom (shower & compost toilet)
09:07 Upright Fridge/Freezer
10:10 Kitchen (Induction cooktop, overhead cabinets)
12:35 Isotemp Hot Water heater
13:50 Plumbing and Truma A/C
15:04 U-shape couch and telescopic table
16:45 Bed Lift System
18:08 Water tanks & Diesel Heater
19:23 Queen size bed down
21:05 Roof vent
21:53 Electrical cabinet (Enerdrive system & lithium batteries)
#ExpeditionVehicle #DIYCamper #Caravan
xe tải شاحنة نقل ट्रक caminhão camión LKW truk トラック트럭 грузовик
DIY Caravan Motorhome Camper RV Overlander Campervan VanLife Ex-Military Truck 4x4 Truck
Ex-Army Truck Truck Unimog Tiny Home
Great attention to detail. Lots of intentional design. Love the focus and insights on the materials used.
Just as i said on the outside tour, take a bow you guys, you have achieved great things together..travel safe, stay happy
Thank you so much for watching the channel and all your support!
I'll be honest, I've been watching your videos since you first got the mog and had that disaster with the company that built the shell. Watching you putting the interior together looks like a shit show... Looking at it today, I'm impressed, you've both done a great job. I'm glad I didn't post a negative comment at the time, I was very much an armchair critic! Congrats to you both, what a great build you have ended up with.
Wow... for a couple of noobs, you guys have really risen to the occasion and flipping NAILED IT...
Much respect and sincere admiration are floating your way from the Rocky Mountains of NW Montana.
You two are a VERY effective team!
Thanks a lot Jarren, that is so nice to hear and we appreciate you takimg the time to write this comment!
Any Realtor agent would be jealous and doubtful about your abilities, and any builder would be proud and amazed with your talent. ¡¡Pura Vida!!
Your build is so amazing!
Congratulations guys. Alot of hard work and love has been put into this build. Well done guys. Travel safe. 🍺👍❤️🇦🇺
Thank you so much for your kind words and for all your comments, we really appreciaye your support :)
9:41 most new fridges nowadays have hardware that allows you to flip the hinges to open either left or right. I've got a feeling yours comes with that. It only takes 5 mins to change..
thank you for sharing a great detailed video as great watching all time
for the bed run 2 metal strips down the uprights and connect one to live one to negative assuming its 12v. on the bed mount spring loaded metal wheels or a spring loaded metal strip with metal mount that sit against the upright strips wire each wheel to the light circuit
Your home is beautiful, efficient, and looks very comfortable.
Thank you so much for watching and taking the time to comment!
Pat yourselves on the back guys, you have done an amazing job for two novices, absolute weapon of truck, looking forward to your next adventure, have fun and stay safe
Thank you so much Alan for following along and for taking the time to comment!
Love the rig! Can’t wait to watch more adventures
A monumental job love your work hope you get years of enjoyment from it you deserve it
Have you thought about a shelf that's hinged across the back that covers your toilet when showering and folds back against the wall for using the toilet
You've both done a great job. Extremely impressive. However, for safety purposes, fire equipment should never be near the stove or near the fire risk. It should always be near the door. If you get a fire near the safety equipment, you might not be able to get it. And you want to be fighting it from near the door so you can get out if need be. The only exception is an area like the bed that has to pass the risk area to get out. That might be worth having a second small extinguisher there to reduce the risk of getting trapped. Otherwise, fantastic.
Nice work guys. Impressive build.
Thank you so much for going over the entire build. I am building a smaller version on my ford f350 and this is going to help tremendously. Thanks again and I love the channel!
Bedankt
Thank you Pascal for the extra support, much appreciated! Bedankt :)
I love how you left room for a baby! I have never seen any camper with that design in mind. Oh the regular house fridge nice! That bed has definitely given me an idea, thank you.
Thank you The OutFit!!
well done guys love your work, it really is the ultimate build. enjoy!
Thank you very much for the nice comment and for watching!
Congrats guys on the successful build. Hope to see the new adventures :)
Thank you Jovial for watching! Hope you enjoy the upcoming adventures :)
Brilliant job! You guys are an inspiration for our little camper build.
Cheers from New Zealand. 🤙
Nice build! Very nice use of space and well done for no experience. I think some of your dad rubbed off on you for sure even though you mention you didn't hang out a lot. He'd be proud of you guys! Great reviews, inside and out.
We have plenty of doors here in Denmark, but no mass shootings. Maybe you should buy some of our doors and see if that helps?
Very nicely planned, designed and built. You've made great use of a very small space. I'm impressed how much functional equipment you got in there and how well organized it all is.
I came here for the bed lift system, which I had a concept brewing in my mind - would love a parts list and sources of providers for that. I also love how you’ve done everything about the composting toilet, but needs a drop down cover for when the shower is in use, rather than a plastic sheet. Lots of well thought out detail in this van.
Very nice, travel well!
That is the coolest vehicle! Going through the inside just shows how great a job you did fitting it out! Congrats on a great job and thanks for sharing. It would be interesting on how much it cost.
Thanks for a great wrap up of the interior build, so much attention to detail and effective use of space. So many new skills acquired. Keep up the great work and travel safe
Bowser’s set up is 👌🏽
Absolutely sick build, top work and the fact it looks ‘homely’ is ❤️❤️🙌🏻. Well done, so excited for you all, leaving the rat race behind.
That’s seriously impressive work. Extremely well thought of.
It looks brilliant and you're still looking to improve the build, adding a cot for a little Chris or Ange that will be fun travelling around and what a fantastic way to start life. It will never be that clean again.🤣
Wow that's next level guys. Very well thought out And I love that sleeping area. Agree on the pulley set up. One thing less that can go wrong. Regarding your cream coloured roof vent, why don't you just spray paint it white?
Thanks for sharing
It was a nice tour of your build
Such a awesome job guys loved following you both build the beast that the mob has turned into 😍 take care and enjoy!!
Thank you as always guys for your nice comments! Hope you and your family are well :)
Great job guys, I like the idea of a third battery you can’t have enough electric. Great baby room over all just a smashing job from you both.❤
Loved what you've done 👍 looks awesome.
Thank you very much for the nice feedback!
Great job!
20:04 I'd say use a drag chain on that cable, not sure if you've considered this
Hi guys thanks again cheers 🇦🇺🇳🇿🇫🇷🚛☮️✌️
Thanks.:)
Have yous run out of power with your 400ah battery bank, if you get a few days of rain and aren't driving? Love this build. Have been watching from the start. :)
We have actually been lucky with the weather so far but actually in next week's vlog we touch base on the subject!
Thank you so much for following along since the beginning :)
Well done on building the RV and TH-cam channel guys!
I’m wondering how much in weight did you end up adding to the truck?
Thanks a lot Mike. The mog was 6.4T when we got it and now 9.2T fully loaded with 400L of water and 360L of diesel.
Awesome ,great setup
Chris, worth building a bit of a cover that you can put sound proofing in, that can go over the water pump? Might be worth trying before replacing it for something quieter?
Good job people
Awesome job 👍
CHRIS i think you really understand rate your abilities mate you turned your hands to alot of trade there mate . 👌
Beautiful cabinetry work Chris, a real eye for detail. Those coffee cup coasters look 'Quality'.
Looks like you've proven me wrong when I thought your 240v fridge would chew all your power. Happy to admit my error of judgement. I did warn you about that Merbau timber and its leaching tannins though. :-)
Cheers, Marty from Perth
Looks awesome guys! Can’t wait for the adventures to begin!
You do know that once you have a baby, you’ll need a trailer for all their stuff! 😂🤣
What size are your windows in your dining area? We are starting our build and are inspired by you guys!
Well done .....cracking job.....👌👌🏴
Thank you so much!
I’ve seen people paint the trim on the ceiling van to white. Maybe you guys could Check out some white paint?
Oh, one thing you didnt address is stabilizing the items in the fridge while trekking across land, especially in more technical landscape.....being that you don't have a chest fridge.
Your dad would have been proud Chris.
Great job on the tour of the interior 👍.
One thing though, the “Brains 🧠 of the Operation” are you guys… Well done 👍
Great build Guys, WOW what a head ache just thinking about it and where to start. Very nice job. Oh your fridge lock where did you get them and what brand are they. TIA.
Great wrap up of the build guys which I have watched from day one of the project. One question where did you get the magnetic spice rack from please Cheers and keep up the great vids 2auskiwis
Thank you for watching Allan! We got it from Ikea :)
Great to follow you both on your adventures. Love it and thanks for sharing with us all. I have a question about the electrics cupboard. What is the device on the ceiling, the round object. Smoke detector??
I have a concern from your spear fishing video back on my birthday in January.
The orange power cord used to power the induction hub. If what I saw it was a long red cord coiled up on the table. This is a no no. The cord can heat up as when power goes thro the coils it produces an electric field. This heats the cord and reduces the power given to the appliance. I suggest you use a short cord. Hope this helps.
Otherwise we really i joy your trips and feel envious!!!
Amazing build!!! Thanks for sharing! What's the dimensions of the box?
Impressive build. But whiy you dont made yore fridge open to another side. Isnt it more comfortable? All fridge usually have this opotunity.
Thank you! No unfortunately we tried but we couldn't change the hinge on this model.
@@TheOutFit My mistake, i miss your explanation in episode about the fridge.
Been following u on utube for a while..... Love your story...... Where do I see your photo's taken. Still
Thank you Paul for following the channel for so long! We share some photos on Instagram but we don't have a dedicated website for them. Is that something you would be interested in?
@@TheOutFit Remember if you don't subscribe or pay.... You are the product... Will still watch
Did you guys built the actual box? Or are these able to be ordered/made? 😍
The box was assembled locally in Perth by a manufacturer to our custom dimensions and requests and we did the entire fitout ourselves.
@@TheOutFit what is the company name? And do you remember the rough price for just the box? I’m struggling to find someone. Thanks for your reply love your videos
@@adventuresoflukejames2643 Unfortunately we had some issues with the company so we wouldn't recommend them. We did a full price breakdown video here : th-cam.com/video/iiSzKmrgQ_k/w-d-xo.html
🇿🇦♥️
I did the same thing covering my toilet in my wet bath. I also have made covers for my acrylic windows that could be scratched by a bunny's ass. I'd much prefer safety glass windows.