Goblin Raw Piuma TimeLapse Build
ฝัง
- เผยแพร่เมื่อ 20 เม.ย. 2022
- Complete build from start to setup.
My setup:
* Goblin Raw Piuma 700
* Theta C1/T1 HV Servos
* egodrift 4035HS 520kv motor (temporary until custom wound motor arrives)
* YGE Saphir 155amp ESC
* ManiaX 8s 4000mah 55c lipo
* Vbar Neo with Vcontrol Touch
Thanks for watching!
dam you move fast Steve
Always enjoy your build videos. You should build Andy’s v2 and just let him take the credit for it on the podcast 😉✌️
I’d totally do that. Lol
Sweet helicopter man. Im trying to figure out what plane was in the right of the frame. The white one that looked like an Extra
Flex innovation QQ Extra300G2. Great little foamy 3d plane with lights inside.
does this kit come with retaining compounds and servo horns ? about to do my first SAB build !! Thank you for this cool time lapse build video.
No you’ll need to supply your own retaining compounds and no servo horns. Suggest the sab ones over the ones that comes with most servos.
Just got this kit. Did u use that green retaining compound the manual refers to? Never used it in any past builds. Thanks for the vid
Yes I use the sab green or Bob smith industries green. Most green viscosity is too thin and runs. It can get into the bearings and lock them up. If the green you can get is thin, what I do is put the locktite in the freezer, and let it get cold to thicken it up. A little goes a long way with green.
Hello I also have the capacitor with the theta t1 servo. I would like to know if it is mandatory to put it? And what exactly is it for? I was thinking if I buy a buffer pack (1ST BUFFER-PACK 50F V4.8), I don't need to install the capacitor that comes with the theta t1 servo?
The buffer packs and small cap that comes with the servos run difference and serves a different purpose. Run both. I run both on a neo with no issues. The small cap will handle any fluctuations in the voltage from the servo draw. The buffer pack won’t handle the small fluctuations as the small cap directly plugged into your fbl.