4 ways to drill open a lock
ฝัง
- เผยแพร่เมื่อ 28 ต.ค. 2018
- In this video i will try 4 different way to drill open a lock. These methods can be used for the majority of locks you come across around your house. I will be using clear / transparent locks so that we can see what exactly happens to the lock as we drill it. Iv seen so many different ways to drill open a lock and always wanted to know which is the best way and what happens on the inside as its drilled. Well now we will finally find out. LIKE, COMMENT and SUBSCRIBE for more videos. door lock 2019 #DIY #howto #billshowto Your donations help me to keep helping you .....
www.paypal.com/donate?hosted_... - แนวปฏิบัติและการใช้ชีวิต
Congratulations, you're a certified locksmith in the US!!
😂
The video was informative but, I'm never going to understand why people add the stupid, unnecessary music.
It comes with the program/package when you sign up for digital design software optimised for AV (audio visual) social media type stuff
as a locksmith for 29 years, always drill a shear line, take your time, if you rush, you will break a bit off, then you are screwed,,,and always drill perfectly, not like this video, his angles are all crooked,,,,,,,good luck,
whats the best place to drill on the lock in your opinion?
He just said..... The shear line ffs this is why simple shit proffessions like locksmith and plumber exist. Because people are to fucking stupid to stop and use their own brains.
@@Steve211Ucdhihifvshi simple shit professions? Like a locksmith and plumber? Lol .. Those are actually complex and intricate professions
As an idiot who just locked themself out of a bathroom for the first time, I just kept drilling 'till I didn't have to drill no more.
Thanks, worked like a charm! Had to drill out a filing cabinet lock. 3 pins and it popped open. I drilled just above center, focusing on the pins like you first lock.
thank you 1rst maintenance guy here....so informative
I just keep a brick under the doormat to fling through my living room window in case I lock myself out
I rig semtex on mine and leave the trigger under the plant pot
I leave an other door under the mat
Help guys i locked my doormat inside the house!
This was great, thanks so much. Had to use this for work when someone put their own lock on our equipment.
Thank you, got it done within seconds 👍
Ty so much! I tried method #3 along the shear line and the lock popped open at the second pin. I think I got extremely lucky. Good vid, mate.
Thanks so much. My son locked my keys in the shed... even though he's been told a million times "bring the key back as soon as you unlock it"...I was watching this when he decided to not wait ten minutes and took my hinges off my 15 years old shed...sigh... but hey thanks to you I know how to pop the lock for future reference
What a video. Lessons learned: acrylic is softer than brass. I was here for field work tips. This was silly.
Wicked! I have a job for MY new DeWalt now!
Pro tip: don’t use an acrylic padlock to lock your stuff.
Btw nice tests!
Can do this to literally any lock chief
Nicholas Dean nope. Ive tried, i stole an Electric bike and i had to dump it. I broke 4 different drillbits. So please dont talk about something you dont know anything about.
Nicholas Dean Including disc-detainer locks? Don’t think so. Also, mine was just a joke. No matter how good or bad a padlock is but it should never have an acrylic body to begin with.
Markus Lennart So your a thief ?
Markus Lennart oh so your just a piece of shit then? Well I’m not really gonna take advice from someone to lazy to work to buy their own shit so I wouldn’t expect you to be able to put in the time to drill out a lock correctly. Btw your a moron for posting that lol
weeks of struggle is over thanks....
That was well worth watching
Nice! I was looking around for a video on this as I was wondering what was going on inside the lock and what the target objective was.
Thank you for beating out an animation and showing it with these clear locks!
works perfect managed to break into 4 garages last night thanks 😂 joking by the way 🤣🤣🤣
This is exactly what i was looking for! THANKS for helping me steal this car that was locked in a garage out in a field near Bradford Pennsylvania
I have no idea where one obtains clear-bodied locks, but they were an excellent device for this informative tutorial! Also, though I can postulate some reasons why certain people, locksmiths and police for instance, might give your video thumbs down, I cannot agree.
There are, in fact, legitimate and lawful reasons for drilling locks. I recently purchased several job site tool boxes at auction. One is locked. The theft-discouraging design of the box houses the padlock within a steel recess where the bow of the lock is totally inaccessible to any cutting device without severely damaging the box. Thank you for providing this excellent tutorial that gives me several alternative methods to consider.
I will return another time to see if you also have a video detailing methods of drilling out an integral Medico (if I recall the brand correctly) lock on the door of a soda pop vending machine that a former tenant abandoned on a property I own. Regrettably, I already probably procrastinated too long since the machine sat in an unheated building through several sub-zero Montana winters--I shudder to contemplate what, other than a few coins, I will find inside ;-)
Look for them online, the chinese are selling those clear padlocks. Some of them are sold with lock picks for practice
Where to obtain clear-bodied lock? Amazon pretty much has everything, even these.
Surprise surprise! Drilling a cheaply made lock worked everytime…! I’m no angry at myself for watching this video till the end😡
It worked!
Who’d ya rob 😂
Popy 23 19 : My self🙃
@@greenfiregaming3026 damn I felt that
Would like to see you drill a filing cabinet lock
I drilled a master padlock the pins and springs came out but it still doesn’t open with the screw driver??
3:18 why this cut? all the pins jumped at the sheer line, I wanted to see the last one! I think it is better to keep the drill bit in and turn the core. Interesting to see it, thanks for the video!
Thank you for your video. The people below are just mad that nobody would watch there video
Lol 👍
their****
pretty easy when your drilling through plastic...
I use a hacksaw or angle grinder on the shackle of the lock , job done quickly
As to which method works best, I would think a plastic lock isn't the best test medium. For a practical real world scenario it would've been nice if you would've also included drilling out real world locks/deadbolt/doorhandle using the same methods. Yes being able to see what happens inside is insightful. Title should read: How to drill out plastic practice locks 4 diff ways.
heatgun could also do the job.
Bill - next time you do a video, could you leave out the music. TERRIBLY annoying! Thanks for the info though.
Exactly my thoughts! Of course methods that drill though less soft plastic are easier on this lock while they will be harder than drilling through the cilinder with a lock that's all metal or even has drill protection
You do great work that saves us money Mr Bill.
Love your new vice.
Many thanks from Perth.
Another point to make for people is there going to be drilling in steel not plastic. So angle grinder and a pair of pliers to hold it steady. I've used this method on many storage units over the years.
If you have the angle grinder then you're better off just cutting the lock instead of drilling it, it's much faster (just look at professional bike thieves they don't drill the locks, they use a grinder and cut them).
@@2011blueman that's what he was saying. Cut the lock with the grinder, but you obviously don't want to put your fingers directly next to the spinning blade so use pliers to hold it still. If you try and grind it without keeping it still then you'll just push the lock away from the grinder and it won't cut
Good job Bruh but next time use eye protection please.
That music is going to haunt me.
Good Dewalt ad
I thought the vice was a Stanley though, and that's what he praised the most.
i have a Thule Roftop Box and some huligan distroyed the lock trying to open it but failed. It seems to be made of alloy,have a spare one... How can I remove the broken one ?
My late husband used number 3 when I lost the key to my "iron maiden".
Oh boy did we make "whoopie" after he got it opened!!!!
Hah, my kid locked her room with her sister's computer (needed for school), her computer (needed for work) and a friend's car key inside. Smooth move dudette!
It was a standard cylinder lock for which there was no key (it's a rental we took during remodel). I drilled a small hole above, but as near as I could get to the shear line. Like reality, I could not always keep the drill straight, so it veered right-up and then a little up. But, it was a smallish hole, so once I got it fairly straight, I turned the drill on a higher speed and just "sawed" down a little bit and the lock easily opened. The hole is small so you can hardly notice it. The lock still works from inside, but anything that turns the cylinder such as a screwdriver will now open the lock. The whole door mechanism is still completely functional so we're not even going to replace the lock.
Moral #1 of the story (IMHO) drill just above the sheer line (why not through the sheer line? Because it's really hard to do that since the cylinder is often harder steel) and then with mild downward pressure, high turn rate, press lightly down until it chews through the sheer line. Don't break the drill! This has the advantage of leaving the door knob and even lock inside completely functional.
Moral #2 Holy hell, this type of lock should not be used on your outside doors! It literally took me all of 10 seconds and I bet I could do it in 3 with a bit of practice. This is not secure at all!
i am working in an orchard, but i still cant adjust the vice to the way i need
I got locked in my room, lost the key to the door and tried getting out by the window... I have no idea where the key is because the window has been locked with a lock for like 6 years... I went for method 4....I'm still trying
I found that I can drill and open ANY padlock with a larger drill bit and my Makita impact driver in less than 5 seconds using Milwaukee drill bits.
What kind of sized drill bit, im trying to open my lock thays been closed for years and only have a large big thays the size kf the actual lock😂
@@tomthewlis2639 as long as the drill bit is essentially the same size as the portion of the lock where the key fits into, your good to go...
@@chuckfreeman7392 we drilled the bottom of the lock and was boring the barrel but was loosing power so we went from the side, got all the way to the silver swing arm before drill died. Considering going to bug an angle grinder
Usually you don't even need to drill very far. The vibration will magically rattle the pins into the open position. If the key turns counter clockwise, use a left hand drill. I found this by accident once while drilling out a door knob in my house. Not the quietest way to open a lock. But this made me realize that most locks are not particularly hard for a thief to open. False security.
THAT WORKED PERFECT..... Yeah on a piece of shit made of plastic, do that with some harden anti-steel drill pins, along with a harden steel body and some serrated lock you'll have about 2 hours and about 25 broken drill bits and still wont open.
It would be awesome if you could make a video with the multi tool lock pick used on one of these clear locks. but it opens so fast you might need slow motion lol.
Now I can get into my Dads booz cabinet. BTW, I'm 57.
A lot of proper locks have hardened steel inserts to stop drilling - lots of bits broken
@SidtheKid if they steal the tools to drill a lock anything they can get is pure profit
Don't drill fast like this goofball. Ruins bits almost immediately.
A good, regular old HSS bit cutting at proper speed with cutting fluid can handle hardened steels without a problem and still be good when you're done
6:00 it’s tough because your bit has been working hard.
I want to open my almirah..had lost keys or somebody stolen my keys, no idea..plz guide
Heres a few other tips for free,
Check which direction your new drills on hahaha it shoudlnt take longer than a minute it may be the video but it looked like you had the drill on reverse.?! Either that or those drill bits are just garbage.
-Buy a cordless angle grinder, cut the rasp the thing the lock is locked onto, dont even bother with the lock. You can also just cut the brass part of the lock, even a hacksaw will cut straight thru easily.
-Buy a pair of bolt cutters with a couple of pieces of steel pipe on the handles, again dont bother with the lock just cut the thing its on.
-use a drill bit the same size as the lock and drill the whole barrell out. Use lubricant and decent drill bits. Even hardened locks with the right pressure, bit and lube itl take under 2 mins.
i can open it faster using nail clippers haha but serious a bolt cutter will be much faster and a LOT more quiet
This is the lock picking lawer and my videos are 1 minute long.
Or just angle grind the shank
So... Hardened steel.. hmm
I just lost 2 drill bits. Never buy cheap.
Method 2 with plastic is different than with a metal body.
if you steal someone house he gonna wake up
Good seethru method but you should of definitely used real locks. The metal cases would of made a huge difference.
Not at all. To be honest padlocks are some of the simplest easiest locks to pick. But i dont bother anymore. Ive got new padlocks for people to buy and i either cut the lock with hydraulic shears for shits and giggles, drill the whole lock off or simple cut the thing off away from the lock and sell them a new latch hahahaha.
So this video was intended to make burglar beginners to be caught by police :) nice job drilling on soft transparent locks without drill protection.
Come on...like were supose to take a Vice with use to the storage shead???
You try drilling a real lock with normal drill bits you'll be in for a shock
Gonna sound like your mum for a sec & say pls wear eye protection
But it's acrylic
Yea...I... ummm.... locked myself out😁
You just need to protect your eyes mate
you didn't even say what size dri bits you used....be complete please
method 3 allot quicker on a plastic lock , might be slower on a metal lock? more meat
Just think not all locks r made out of plastic bro
Might work on those plastic locks, but try real locks.
For a padlock like these you're better off using an angle grinder to cut the lock off.
you for real ? just pick the lock it takes 2 seconds...
@@CJUrbex Angle grinder takes 1 second and for most people the odd angles that podlocks are in when they're locked onto stuff make them take much longer than 2 second even for seasoned pros.
Leggo My Ego but picking does let you preserve a lock
@@mightyslime4120 Preserving a padlock? I'm not sure in what context you would care about preserving a padlock when you don't have a key. Maybe in an emergency, but then you'd want to use the angle grinder because it's quicker.
Leggo My Ego like most things in life it depends on the situation
If the locks going to be ruined the fastest and easiest way is a angle grinder battery powered. Battery powered because you can control the speed variable. And it goes like butter literally less than 10 seconds. I did my neighbor's boat and he was amazed.
that's
Why would anyone bother to drill out that lock? You could just break it off with a bolt cutter.
Lester says: "Dont let the drill over heat you moron"
So mad. Spent like 30 mins drilling a few padlocks out thinking "when is it gonna break free?" Didn't even try using a flathead after drilling them out to open it. Lol
Lol, it was still fun though 👍
Your alignment needs some work mate.
1m45 thank me later.
Hahahaha dude. You’ve never drilled a lock in your life before that plastic thing. This was informative as to where to drill but Nah, not that easy
Definetly is that easy, i do it for a side job dickhead. Idiots like you pay me a lot of money to get into their shit. Sometimes i even pretend its hard to get a little extra cash outta them hahahaha
For God's sake stop your rambling and get to the demonstration!
You are drilling a cheap acrylic lock. Try that on a real metal padlock! You will find the results won’t be the same!
Music was God awful
boreing
You have no idea what you are doing.
dont make videos about opening locks please, here everything is wrong
Perhaps don't do these videos. Don't need to educate the dangerous or thieves now do we?
You talk too much. Show the thing, turn off music.