M-VAVE/CUVAVE Cube Baby Sound Demo
ฝัง
- เผยแพร่เมื่อ 8 ก.พ. 2025
- Sound Demo of a M-VAVE/CUVAVE Cube Baby
Note: Some of IR/CABs has been changed.
IR/CAB:
1. From Line 6 Vetta to EVH 5150 III
2. Marshall 1960A V30
3. From Marshall 1960A 175 to Roland JC120
4. From VHT Deliverance to Fender Twin Reverb
5. Soldano
6. 5150+Oversized
7. From KT77+Stiletto to Marshall V30
8. Diezel
AMP:
1. UK Gold Clean
2. Shittcow Clean
3. Brown Sound 3 CH2
4. Day Tripper OD
5. Two Stone Coral OD
6. VHS Rhythm
7. Mr. Smith Dist
8. Regal Tone Tweed
9. UK Gold Dist
RIG/GEAR use for recording.
1. Gibson Les Paul Standard Replica
2. M-VAVE/CUVAVE Cube Baby
3. Zoom Livetrak L-20
Connection: I used 3.5mm to Dual TS Cable (from Cube Baby to Zoom L-20), Left to CH1 and Right to CH2 in Zoom L-20 then direct out via USB Audio Interface Mode from Zoom L-20 to iPhone 11.
I just got one of these for experimenting purposes... such a good price too for all the effects you get.
does it delay when you switch presets??
Thanx for share
I just bought this, and the colorful little lights don't turn on, what should I do, when I play it, it only sounds clean effect, not for other effects
have you tried turning the knobs up side down ? or maybe you haven't saved your presets yet. Try to press the both A & B foot switch for edit mode.
@@MonotoneAudioAndLights I'll try it thanks, may I ask again later? 😔
@@blueguitar__ yes, you can ask anytime.
Maybe 😏 t needs to be charged
hold delay and tone for couple of seconds
Please help me how to preset this like solo of she's gone with no buzzy sound
same.. you can try reverb and gain
I have a lot of problems getting nice overdrive sound when I use it with my amp. It is way to harsh, nothing I can do about it. Any ideas?
@@navigatori9797 i think this pedal is not used to use amps, its like your using an amp into an amp
Yeap...I hoped if I use it with clean amp I could gig with it...I have to find another way 😊
@@navigatori9797 try not to use the IR/Cab of the cubebaby then use the preamp as a overdrive or high gain but the noise is worst
@Monotone - can you comment on any IR's that you like (for clean tone)? I'd love to have a couple of "near-Fender" wav's to have loaded versus some of the gritty distortion presets... Thanks in advance!
Im always use the Marshall 1960A for a clean, because of its warm tone
Do you know how to perform a factory reset on the pedal it self? asking for a friend that is not tech savy and cant plug it to the computer
@@fasgamboa have you tested different USB Cable?
@MonotoneAudioAndLights no cable. Want.to reset on the pedal
How does the ir cab and pre amps work? Is it already in the cuvave or you still have to put it in the pedal itself?
@@godwinbaring7870 i’ll recommend the tank G bersion of this.
Sounds like the transistor radio I had in elementary school.
How to save preset
@@usersandeshthegim if you are in the edit mode just hold the footswitch you want to save until blinks multiple times.
Does this have any noice gate? If i want to go this with any gig how this would be sound?
It doesn’t have noise gate. This pedal act like a modeler amp
@@MonotoneAudioAndLights so that there is no noise to play high gain destortion??
Im using a Humbucker pickups to less the noise in high gain i dont know if we use a single coil like in strat.
I've Ms 50g with it so that I can set the zoom before mvave cube ...ig it won't be noice what you say?
@@thevangaguitarman4750 if you use the cube baby as drive its okay to place it before ms50g
cara ngilangin noiz nya gmna ya .
Try to use noise gate pedal
👍
Output nya ga pke jeck ke ample cuma jeck gitar sama casan batray doang aneh
It is not a battery charger, please read the description, you can read the chain and all details.
It is not a battery charger, it is a 3.5mm jack plug into headphone out of the Cubebaby (3.5mm to Stereo TS Cable)
It looks nice, but does it support Linux. If it does not support Linux it's just a fancy door stop to me.
I haven't tried it on linux but it works on windows
You have wine ;)
Ignonrant