Title needs to be updated. It's a Caliber, not Avenger and Cam sensors not Crank. Thanks for the video anyway, appreciate you taking the time to do it.
@@RBTheMechanic No worries. Just think it would help the next person out there searching for it. Have one sitting my garage needing the same stuff but waiting for my back to heal from surgery and the weather to get warmer. ;-)
@@thelegendarywasdgamer9724 No sh!t Sherlock. Just trying to help the person with a Caliber when they search for their specific vehicle. Perhaps a person that doesn't understand they have the same engine. Way to show your worth on the internet.
I got this code on my car. Do you think it should work the same way? . I mean only to replace the crack sensor it will be solved? . I got 2015 dodge charger 3.6
whats up homie. i thought i might have bad fuel pump or bad fuel injectors could cause this code P000B to show up? ive had intermittent problems with my car not accelerating for 5 seconds after stopping. Car didnt start one time but usually fires right up. And my car changes speeds slightly when i am driving. If i accelerate too fast my RPMs get unusually high. I have to d rive like my grandma. But id really appreciate any input you can provide
How many crankshaft sensors are there in the AWD 2007 Dodge Caliber R/T, please? I have my car at the mechanic and they say that they need FOUR hours. Is this correct, or are they just giving themselves that much time in case it takes that long? If the sensors take only an hour each and there are only two of them, wouldn't the time be more like a two-hour job? Or are there 4 sensors to be replaced? I'm exasperated because they say as it's a half-day job they cannot do it until May 25th, 2023. My car was towed to them on April 28th. I had an appointment for May 8th, to have spark plugs changed and fuel lines checked, as I didn't know what was wrong. Took them days to figure out it was the Crankshaft sensors. I'm a retired woman trying to research what's wrong. I figured as the professionals they would have suggested that this was the issue with my car in the beginning. I've had my car to them three times, telling them that it was losing power on the highway going uphill. My Car finally just quit and I had to have it towed. Can you make any suggestions? Thank you. Appreciated it.
I don't know why no videos online explain that when you have the relays in and the air conditioning is not working merely testing the relays by pulling them is not going to tell you if they are good or bad. I still have the problem still seeking a good video
After changing the Camshaft Position Sensors, will you have to do a relearn procedure with a scanner? Asking specifically in regards to the 2007-2009 dodge caliber..
Hi! Patriot 2.4 2013 engine knocks a lot and the error code is P000B. Could this sensor be the reason for the knocking? Has anyone had a knocking engine and after replacing these sensors the knocking went away? Thank you!
@@606_sports ok that’s camshaft sensor B which means exghust cam sensor I would recommend u replace both cam sensor. And then reset the light how ever if the code repeats then replace the oil control valve. First do the sensor if any issues then we can discuss the other valve later on.
@@RBTheMechanic Code: P000B B camshaft positions slow response Bank one. We change these parts. Crankshaft position sensor, A and B, camshaft position sensors, VVTS, intake and exhaust, and oil temp sensor. it idles rough. sometimes the check engine light will come on and sometimes its not. Currently the light is off but the code is still.
Thanks for the video. I changed both sensors and the engine light went off on its own.
Nice good job!!!’
Title needs to be updated. It's a Caliber, not Avenger and Cam sensors not Crank. Thanks for the video anyway, appreciate you taking the time to do it.
Oh will do my friend thank u for finding my error
@@RBTheMechanic No worries. Just think it would help the next person out there searching for it. Have one sitting my garage needing the same stuff but waiting for my back to heal from surgery and the weather to get warmer. ;-)
Lol same engine in 2.4 avenger genius.
@@thelegendarywasdgamer9724 No sh!t Sherlock. Just trying to help the person with a Caliber when they search for their specific vehicle. Perhaps a person that doesn't understand they have the same engine. Way to show your worth on the internet.
Thank you for this helpful video ,wich one is camshaft sensor bank 1 ?
It has 2 bank a & b
@RBTheMechanic I have a message for camshaft sensor b bank 1 but not sure if the one goes in intake front engine or the one at the back
I got this code on my car. Do you think it should work the same way? . I mean only to replace the crack sensor it will be solved? . I got 2015 dodge charger 3.6
If u got the code u got to replace it then reset it
whats up homie. i thought i might have bad fuel pump or bad fuel injectors could cause this code P000B to show up? ive had intermittent problems with my car not accelerating for 5 seconds after stopping. Car didnt start one time but usually fires right up. And my car changes speeds slightly when i am driving. If i accelerate too fast my RPMs get unusually high. I have to d rive like my grandma. But id really appreciate any input you can provide
Yup this is very common on these
How many crankshaft sensors are there in the AWD 2007 Dodge Caliber R/T, please? I have my car at the mechanic and they say that they need FOUR hours. Is this correct, or are they just giving themselves that much time in case it takes that long? If the sensors take only an hour each and there are only two of them, wouldn't the time be more like a two-hour job? Or are there 4 sensors to be replaced?
I'm exasperated because they say as it's a half-day job they cannot do it until May 25th, 2023. My car was towed to them on April 28th. I had an appointment for May 8th, to have spark plugs changed and fuel lines checked, as I didn't know what was wrong. Took them days to figure out it was the Crankshaft sensors.
I'm a retired woman trying to research what's wrong. I figured as the professionals they would have suggested that this was the issue with my car in the beginning. I've had my car to them three times, telling them that it was losing power on the highway going uphill. My Car finally just quit and I had to have it towed.
Can you make any suggestions? Thank you. Appreciated it.
I’m not sure if they saying crank sensor? It got one crank sensor can u find out if it’s crank or cam? Or oxygen sensor
@@RBTheMechanic crankshaft sensors for an AWD 2007 Dodge Caliber R/T
@@zaralunden3202 it has one sensor
@@RBTheMechanic There was a temp receptionist who said Crankshaft sensor. You may be right and it is the Cam Shaft Sensor and two like in your video.
@@zaralunden3202 yea it might be cam se side cuz no car has 4 franks. Ur it dose have 4 cams
I don't know why no videos online explain that when you have the relays in and the air conditioning is not working merely testing the relays by pulling them is not going to tell you if they are good or bad. I still have the problem still seeking a good video
This video is not related to ac what is the issue ur having with ac
After changing the Camshaft Position Sensors, will you have to do a relearn procedure with a scanner? Asking specifically in regards to the 2007-2009 dodge caliber..
No relearn but u do have to reset it
Hi! Patriot 2.4 2013 engine knocks a lot and the error code is P000B. Could this sensor be the reason for the knocking? Has anyone had a knocking engine and after replacing these sensors the knocking went away? Thank you!
No I had never had this knocking due to this sensor how ever u can replace it and see the outcome
@@RBTheMechanic Thank you so much!🙂
THIS IS NOT CRANK SENSOR BUT CAMSHAFT SENSORs!!!!!
My car has 302k on it and still running and it’s a 2011
THOSE SENSORS WILL NOT FIX THAT CODE... INTAKE DESIRE AND ACTUAL VALUES NOT THE SAME, SENSORS ARE READING...
Which one is bank 2?
What size is ur engine? Year make model?
@@RBTheMechanic 2008 jeep patriot 2.0l
@@606_sports that’s 4 cylinder it dosent have bank2 what is the code ur getting
@@RBTheMechanic p000b
@@606_sports ok that’s camshaft sensor B which means exghust cam sensor I would recommend u replace both cam sensor. And then reset the light how ever if the code repeats then replace the oil control valve. First do the sensor if any issues then we can discuss the other valve later on.
🎉
Never heard of a cam sensor on it
Ok
I have this code but already did this but it’s still there
I have about 4 videos on this so replace the sensors and cam acuator worked out
Just doing cam sensors some times dosent fix the issue. What codes do u have
@@RBTheMechanic Code: P000B B camshaft positions slow response Bank one. We change these parts.
Crankshaft position sensor, A and B, camshaft position sensors, VVTS, intake and exhaust, and oil temp sensor.
it idles rough. sometimes the check engine light will come on and sometimes its not. Currently the light is off but the code is still.
@@jujub428 u might need to use better scan tool to reset the light and after that it will test it self
@@jujub428 try the crankshaft sensor... this video is Camshaft sensor
Audio is fucked
Sorry