Hi.. Can I use Chain link breaker tool for my NS to remove old chain set without removing whole thing, bcse new chain set comes with chain link and lock
14 teeth. 15 teeth won't fit directly due to tight clearance. You'll need to take off the engine casing shield, but I won't recommend that. Go a teeth or two lower on the rear sprocket if you can.
Good that the ktm's don't come with an open chain as powerful bikes don't come with master link as they are unsafe. Also putting in an closed chain and removing it is an headache due to the riveting and the tools required. Dude why no torque wrench or thread locker?
because i don't have a torque wrench and its pretty costly in India. I have an improvised torque wrench which I'll be featuring in my next video. and next thing not every bolt needs threadlocker right?
Dudes and Tools yes torque wrenches can be expensive, can do without if you are not going to work on the engine. Btw not every bolt needs thread locker but if you had read the duke 200 service manual you would know that the sprocket bolts need thread locker, right?
dude i opened the front spocket cover and cleaned up the grease with water and kerosine later i started the bike and rev it got some oil leaked from those holes is that safe to ride my bike or i need to visit my service center ??? i think water may entered the engine while i Washed. 😪😪help! and( sorry for my bad English )
Bro one of the front sprocket cover holes is on the engine casing so if you open it oil might leak. Nothing to worry about just remember from next time whenever you open front sprocket don't tilt or start the bike
While making video and giving ur guru gyan on changing sprocket don't skip video I.e at 2.10 mins u didn't tell to remove the nut of other side too without that u can't remove the side stand
KTM did a good job on those 390s. The chain is super easy to replace since you dont have to remove the swing arm (like on many other motorcycles).
What? Most chains come broken and need to be joined. Never taken a swingarm off to change a chain in my life.
@@1000sofusernames Not a good idea to buy these. The masterlink is always a weak point on such chains.
One of the best video I have ever seen ❤️
Ye jo padock use kare rahe ho ..vo samne ke tyre par bhi lagta hai kya
Does na 200 engine sprocket fits ktm duke 200?
Brother Which one is good to replace rollen chain or the original one?
Bro it is so great
Can u please suggest a toll kit for my duke 200 for all the uses mechanic purposes of bike
Taparia socket set sa46
KTM duke ke part kaha pr milenge bhaie
thank you for this video!
Rolon ki chain sprocket rc200 ke liye better rahegi bhaiyya
Pls make a video on how to adjust the chain slack!
watch the video. He does adjust the slack
Bro...the ones that we get from KTM service centres is also Rolon isn't it ...!
2:12 this bolt is the hardest to pull out
4:31 RIP Disc rotor
🤣🤣🤣
Noob question :) the chain and sprocket look okay, why change?
Bro vary vary tq bro👍
The sprocket is in good condition. No need to change it..
Hi, do you know if the cylinder and piston of duke 200 will fit in a duke 125? I want to upgrade my duke 125 to 200
😂😂 hey, simpleton. Please understand what "CC" in bike engine actually means.
Which one will u suggest me for my duke 250 for better performance and life of chain sprocket too..pls share the link
sir .where did you buy your sprocket and chain set...im from Philippines..
Hi.. Can I use Chain link breaker tool for my NS to remove old chain set without removing whole thing, bcse new chain set comes with chain link and lock
Bro...Which T.Spanner is used to remove the nuts of sprocket cover?
8mm
Dudes and Tools Okkk...Thanks bro.☺
Bro...also...can we use 46 Teeth rear sprocket on Duke 200...that is used in 250's and 390's.
it should be possible but you'll loose top speed
Dudes and Tools ok.
Bro when installing new sprocket and chain how we properly fix the ads back sensor in the correct way .in this video i don't understand that portion
I have duke 200 which chain set suitable for me
Its for 2200 from which site did you broughts
Pls make tutorial on how to adjust bike chain
What is the stock original front sprocket ? possible to replace 1 more number to make it faster ? thanks
14 teeth. 15 teeth won't fit directly due to tight clearance. You'll need to take off the engine casing shield, but I won't recommend that. Go a teeth or two lower on the rear sprocket if you can.
Can you give me the link of the tool set
how can iget rc200 sprocket chain???
Bro mine lasted 20k km ...but I feel that there is some sound coming out of it...should I go for new one
What lubricant u use fr bearing?? Vaeseline?? Petroleum jelly??
grease
Hi bro the chain sprocket was purchased from any shop
Bro plz give me the link from where u bought it.
How much price
Good that the ktm's don't come with an open chain as powerful bikes don't come with master link as they are unsafe. Also putting in an closed chain and removing it is an headache due to the riveting and the tools required. Dude why no torque wrench or thread locker?
because i don't have a torque wrench and its pretty costly in India. I have an improvised torque wrench which I'll be featuring in my next video. and next thing not every bolt needs threadlocker right?
Dudes and Tools yes torque wrenches can be expensive, can do without if you are not going to work on the engine. Btw not every bolt needs thread locker but if you had read the duke 200 service manual you would know that the sprocket bolts need thread locker, right?
i did read the manual but didn't notice the thread locker part.....i wouldn't have used it anyways 😅
Dudes and Tools totally fine, do let your viewers know it's recommended.
ya sure man
Which is you use the tool kit(socket set) model and price..?
Local store bought:f-force
can I put grease onto the axis rod?
dude i opened the front spocket cover and cleaned up the grease with water and kerosine later i started the bike and rev it got some oil leaked from those holes is that safe to ride my bike or i need to visit my service center ??? i think water may entered the engine while i Washed. 😪😪help! and( sorry for my bad English )
No! Get it checked ... there is a seal which might got broken !
I faced the same problem. The oil depleted from the engine.
Bro one of the front sprocket cover holes is on the engine casing so if you open it oil might leak. Nothing to worry about just remember from next time whenever you open front sprocket don't tilt or start the bike
bro Please reply : based on yr experience How is it compare to the stock chain/ sprocket , mine lasted for 11,000 km
This is also an OEM part. It lasted 20k kms for me
Mine lasted around 45k KMS, but it does require constant cleaning and lubing. I use Diesel for cleaning and Motul Chain lube for Lubing.
@@siddhantpatel3537 chain sprocket lasting 45,000km fck yr ass. maybe u dnt giv a damn about the noise
After how many kms need to change the chain and the sprocket?
bhai plz bato na ki ktm duke 200 ka spare part kaha milta hai? servies center wale nahi bechte spare parts.
They are supposed to sell you the spare parts at service center.
Rear sprocket can use a pulsar 200ns ??
U also own duke 200,n my problem with that is chain sound too much, please suggest me how to maintain a chain
My chain makes a noise in 1st amd second gear when i pres the clutch.. from the front sprocket ..idk bike is new ...
Ktm manufacturing fault.
I ve d250 n noise doesn't go
My bike vibrates while on run..after I changed my front sprocket..
What could it be?
Did you change just the front sprocket.....? It is advised to change the whole set
@@dudesandtools problem fixed after I changed my who sprocket set with chain
@@dudesandtools should we change front and rear at the same time? Can't i change the rear alone?
Bhaijaan Mera pichla wala tyre hai jo Chalte hue doubling Karta Hai uski video Banaye please
Can i install this on 2017 ktm rc390
is it necessary to change the chain if I only change my 15 teeth sprocket to 13 ?
Where did you get 13t sproket for duke ?? And how it rides?
@@haneethkathula3065 i didn't.
it's been a year.
i just changed rear sprocket.
Send link pal to buy. 6holes chain sprocket kut for Duke 200
Online la vangala bro.....spares shop la kelunga
Bro, to learn all this stuffs we need to do mechanical course?
No
I have problems with my dude 200 noise is coming from chain don't know how plz tell me
Check for chain wear.....Change it if youve ridden 25k kilometers if the noise is bothering you too much
Dudes and Tools no brother it's new bike only 4.5 k kms driven
check if you have the right tension..... take it to the service center if the problem persists
Brother... ktm bikes have a wide,/ thicker swing arms which makes the chain slapping kore.easier. nothing to.worry. evry ktm.bike jas it.
What song was dat plss someone help me
Abe bhai tu pehli baar kr rha h sb khol diya re😂
Buy link?
While making video and giving ur guru gyan on changing sprocket don't skip video I.e at 2.10 mins u didn't tell to remove the nut of other side too without that u can't remove the side stand
super👌
Thank you Aravind
The way you press the wheel like that will bend the disk-brake below.
I recommend not to do like this
You also need to change the slider 😏
India theke English
👍🏼👍🏼👍🏼👍🏼
👌🙏👍💐😍