Astra J - 1.6 CDTi map sensor - P0299 - Engine underboost - How to

แชร์
ฝัง
  • เผยแพร่เมื่อ 23 ส.ค. 2024

ความคิดเห็น • 52

  • @bigdosser7777
    @bigdosser7777 ปีที่แล้ว +6

    Did this yesterday, the sensor was also thick with soot. So far so good.

    • @Roverturbo
      @Roverturbo  ปีที่แล้ว +3

      Check out my other video too, as the code came back. .. took a while tho.

  • @wilkerdias8180
    @wilkerdias8180 4 หลายเดือนก่อน

    Great video, thanks for sharing, it’s gonna help a lot

  • @lackodubravka3288
    @lackodubravka3288 5 หลายเดือนก่อน +1

    I accidentally broke the plastic parts around the sensor while trying to pull out the sensor. I think they fell inside. should I be worried? I can't see it from the top. should i take it all apart? 1:48

  • @niorneiltrinity6371
    @niorneiltrinity6371 วันที่ผ่านมา

    Not sure I'll be cleaning it with water or wd40 , maybe electric cleaner ?? But thanks for video !!

    • @Roverturbo
      @Roverturbo  3 ชั่วโมงที่ผ่านมา

      Thanks for the comment. In the video I clean it with brake cleaner, I didn’t suggest to or use water or wd40 to clean it. 👍

  • @marktymon5637
    @marktymon5637 หลายเดือนก่อน

    Could you not do an Egr clean or replace on this model engine...All vauxhall forums crying out for good clear video as your spot on..Proper common problem throwing P0401 Code...As mine showing...Cheers👍🏻

    • @Roverturbo
      @Roverturbo  หลายเดือนก่อน +1

      Thank you, I do have a video on the issue, but not a complete how too.. but I will if the opportunity comes up.

  • @user-dw8er8yw1b
    @user-dw8er8yw1b 5 หลายเดือนก่อน

    Скажите пожалуйста какие значения MAP сенсора являются нормой на холостом ходу?

  • @mancsblue
    @mancsblue 2 ปีที่แล้ว

    I have the exact same issue on the wife's astra which is the same as yours .
    Did this fix the issue ?
    It's already had a boost controller changed at vauxhall and was ok for 6 months and is now back to its old tricks again

    • @Roverturbo
      @Roverturbo  2 ปีที่แล้ว

      No, still came back.I suspected the dpf was blocked with ash. I sprayed oven cleaning foam in the lambda/sensor hole… left it for a few hours, flushed it out with some water. Light/limp not come back on and had more power overall.

  • @Tobi4775OP
    @Tobi4775OP ปีที่แล้ว

    How did you remove the plastic cover :) ? - great video by the way.

    • @Roverturbo
      @Roverturbo  ปีที่แล้ว +1

      The engine cover? Just pull it

  • @krtolebiohazardcs1.681
    @krtolebiohazardcs1.681 7 หลายเดือนก่อน

    My 1.6 cdti have very strange,knocking sound first few minutes,but only when car accelerates. Can that be bad injectors?

    • @Roverturbo
      @Roverturbo  7 หลายเดือนก่อน +1

      No idea, could be anything. Get someone to look at it for you.

  • @Fritsvrolijk
    @Fritsvrolijk 2 ปีที่แล้ว

    Thanks Pro can you retract the rear brake pads with your Autel ???? keep the info coming from the Astra

    • @Roverturbo
      @Roverturbo  2 ปีที่แล้ว

      This one has a manual handbrake. I have used it on other cars tho.

    • @Fritsvrolijk
      @Fritsvrolijk 2 ปีที่แล้ว

      @@Roverturbo oke cant you see the option retract rear callipers ?? Thanks Pro

    • @Roverturbo
      @Roverturbo  2 ปีที่แล้ว

      On what car?

    • @fritsduwel3703
      @fritsduwel3703 2 ปีที่แล้ว

      @@Roverturbo same as yours with electric handbrake from the year 2015

    • @Roverturbo
      @Roverturbo  2 ปีที่แล้ว

      You need to go into on the main screen “service” and “EPB”

  • @ahmedalbassam3572
    @ahmedalbassam3572 ปีที่แล้ว

    Hey there
    I have maserati ghibli 2016 just a 70.000 KM
    And it’s show the same code issue P0299
    I need just to replace the map sensor ?

  • @soufianeshna8013
    @soufianeshna8013 2 ปีที่แล้ว

    Hi i have a problem with my astra k of 2016. The default code is p0401 and the garage dont found the problem. I watch you video and cleaned the map sensor but. Can you help me please.

    • @Roverturbo
      @Roverturbo  2 ปีที่แล้ว +1

      That code points to the egr, without seeing the car, it’s impossible to tell, has it been cleaned, or replaced?

    • @soufianeshna8013
      @soufianeshna8013 2 ปีที่แล้ว

      @@Roverturbo thx for your answer. Yes the egr is replaced

    • @Roverturbo
      @Roverturbo  2 ปีที่แล้ว

      The wiring to it is the next thing to check.

    • @dmitrys4459
      @dmitrys4459 2 ปีที่แล้ว

      @@soufianeshna8013 I had the same problem, cleaning the egr valve did not help. I had to disassemble the entire egr block and clean the exhaust gas cooler.

    • @luckboxp.2097
      @luckboxp.2097 2 ปีที่แล้ว

      Most of the times the chicane between the egr and intake is filled with all the glonk u saw on the sensor. If the symptom is low flow.

  • @henriquebotelho2006
    @henriquebotelho2006 2 ปีที่แล้ว

    Hello. Thanks for the video. I just clean the map sensor and now i have the engine light on and i feel lag in the engine while driving. Can anyone know something about this problem?

    • @Roverturbo
      @Roverturbo  2 ปีที่แล้ว

      Maybe the map sensor is faulty? .. if that’s all you’ve touched?

  • @frothe42
    @frothe42 2 ปีที่แล้ว

    I'm curious to know how much a sensor would cost?

    • @Roverturbo
      @Roverturbo  2 ปีที่แล้ว +1

      Not sure, depends if you buy oe or aftermarket.

  • @scorcha100
    @scorcha100 2 ปีที่แล้ว

    Ive got this exact code on my 2007 Ford Galaxy, turbo under-boost P0299, Ive checked for leaks and couldn’t find any. Will try giving the map sensor a clean. Mine brings on the eml but after driving a few days with the light on it resets itself then a few days later does it again. Driving normally its fine but flooring it in 3rd gear tends to bring the light on. Any ideas what else this could be ?

    • @Roverturbo
      @Roverturbo  2 ปีที่แล้ว +1

      Map sensor, boost controller, turbo, egr.

  • @MrCHrisfj
    @MrCHrisfj 2 ปีที่แล้ว +3

    Please don't use WD40 as a lubricant.
    It reacts badly with the vast majority of seals causing them to swell up and can hasten their demise. Use water (saliva) or a sensor safe lubricant on the seal, if you really need to lubricate it, or you'll be returning to the job diagnosing an airleak in a few months because the seal has perished prematurely.

  • @gazzersmith8274
    @gazzersmith8274 2 ปีที่แล้ว

    Will this be the same for a 68 plate mokka plz

  • @danhayes3546
    @danhayes3546 2 ปีที่แล้ว +1

    I clean the map sensor every time I change the oil twice a year and it always full of carbon

  • @rauljii2345
    @rauljii2345 6 หลายเดือนก่อน

    Why My check engine on My astra K is on ??? Pls respond

    • @Roverturbo
      @Roverturbo  6 หลายเดือนก่อน

      No Idea, get the codes read. 👍

    • @rauljii2345
      @rauljii2345 6 หลายเดือนก่อน

      @@Roverturbo i put in on tester and delete all the fault and back it on.. in dont know what i have to do

    • @Roverturbo
      @Roverturbo  6 หลายเดือนก่อน

      Google the code?

    • @rauljii2345
      @rauljii2345 6 หลายเดือนก่อน

      @@Roverturbo not yet

  • @followfredl9335
    @followfredl9335 2 ปีที่แล้ว

    Complete air intake cleaning and egr disable or you'll do that every 20tsd miles

  • @tudorbodrug9284
    @tudorbodrug9284 11 หลายเดือนก่อน

    for me, the car lost power, but I don't have any mistakes..Astra 1.6 diesel 2016😢

    • @Roverturbo
      @Roverturbo  11 หลายเดือนก่อน

      Could be anything, codes? Blocked dpf, what’s the dpf difference pressures?

  • @nightstorm9128
    @nightstorm9128 4 หลายเดือนก่อน

    You just covered the sensor in oil ,,,

    • @Roverturbo
      @Roverturbo  3 หลายเดือนก่อน

      The sensors inside…