I have this very truck, Westcott TRD Pro lift kit, and rock sliders with tig welding. I can't say enough about the quality and craftsmanship put into the Westcott products. Thank you and keep up the awesome work!
Thank you for your support and believing in our products and what we do. We really appreciate it!🙏. Just a little American made company trying to get on the map😉🇺🇸
I love educational videos like these. A lot of consumers don’t know what to look out for and if you hadn’t pointed it out I would have never noticed how subpar the welds are compared to your product.
Best on the market for sure! I'm running the 20 degree with kickout, tig, and dom tube. As well as the Pro-Lift. The only reason to replace the sliders is to get the clearcoat version its that good haha
What are your thoughts on adding some mild spikey grippers to the top plates so I could step on the slider with bare feet but not have a slick top plate when it’s wet since I’m in the Hawaiian tropics and get lots of rain.
I got some rrw7 wheels 17/8.5 0 offset, do you think 285/70/17 would rub the uca with your lift kit installed? I plan to do a bmc or minor trimming if needed but not sure about the uca
Your products are top-notch! Do you all make or will you make precollar lift and beefier upper control arms for a 2021- current Nissan Titan Pro 4X? If so, I would love to purchase from WD because of your history and the quality of your product. Love the videos!
I have the cbi sliders they are comparing against. The CBI sliders are a disappointment. When I bought my sliders, the Westcott sliders didn't exist but I now would urge others to get the westcott sliders.
you guys are to expensive. With all the wielding your talking about nobody notices that. They are rock sliders and are designed to take a beating. You think people look at that?? No. Nobody notices that.
I would have to say you are way wrong. We are now going to be manufacturing a handful of the other companies in the same market place that notice the quality we demand and asked us to build their sliders and other parts. We sell over 500 set of sliders a month and we have 11 full time top tier welders working for us and we still run 6-8 weeks on orders so people are willing to wait for them. People that buy our stuff are people that know what quality means to them not some stuff made in China. They understand that they are supporting a company that makes stuff all in house to give jobs to people here in the USA and we build all off our stuff in house to make sure it’s the best of the best😉. The fact that we work direct with Toyota that believe in us says a lot right there. But hey to each is own. Thank you for the feed back.
![CAMPปลิ้น | EP.83[2/2] ประสบการณ์ขนหัวลุกจากตำนานวงการผี!](http://i.ytimg.com/vi/T_kFecQw7Ds/mqdefault.jpg)
I have this very truck, Westcott TRD Pro lift kit, and rock sliders with tig welding. I can't say enough about the quality and craftsmanship put into the Westcott products. Thank you and keep up the awesome work!
Thank you for your support and believing in our products and what we do. We really appreciate it!🙏. Just a little American made company trying to get on the map😉🇺🇸
I love educational videos like these. A lot of consumers don’t know what to look out for and if you hadn’t pointed it out I would have never noticed how subpar the welds are compared to your product.
I’ve got your sliders on my 4Runner and absolutely love them. Wish you’d make them for a 12th generation f150 fx4. I’d buy em yesterday
Best on the market for sure! I'm running the 20 degree with kickout, tig, and dom tube. As well as the Pro-Lift. The only reason to replace the sliders is to get the clearcoat version its that good haha
I really hated to get rid of the clearcoat option. They were so money looking.
What are your thoughts on adding some mild spikey grippers to the top plates so I could step on the slider with bare feet but not have a slick top plate when it’s wet since I’m in the Hawaiian tropics and get lots of rain.
I have this exact truck and wanting to get this look, what wheel spacers do you guys normally run?
I got some rrw7 wheels 17/8.5 0 offset, do you think 285/70/17 would rub the uca with your lift kit installed? I plan to do a bmc or minor trimming if needed but not sure about the uca
How does the length compare.....? I really like the coverage the ones that are installed on this Tacoma.
Your products are top-notch! Do you all make or will you make precollar lift and beefier upper control arms for a 2021- current Nissan Titan Pro 4X? If so, I would love to purchase from WD because of your history and the quality of your product. Love the videos!
Thank you for your kind words.🙏. We don’t at this time but have been asked many of times. I will look into it and post something up when we do😉
Thanks so much!
Freaking awesome!
What’s the turn around time on an order of rock sliders? 6-8 weeks?
Quality stuff…
I have the cbi sliders they are comparing against. The CBI sliders are a disappointment. When I bought my sliders, the Westcott sliders didn't exist but I now would urge others to get the westcott sliders.
@@PCHwoods thank you for the kind words!🙏.
Was that the 0-degree slider in your video? Very interested in these.
That was a 0 degree👍
Looks like Cbi on that Tacoma.
I was wondering what kind the sliders were on it as well.....I like the fact really cover front and back. Seems so many out there are too short.
Why call it a Car 🙄 it’s a TRUCK
Maybe I should just call it a vehicle then no one gets upset.
Rig is what my father-in-law would call his trucks and SUV’s and he was from the Yakama Indian Tribe.
you guys are to expensive. With all the wielding your talking about nobody notices that. They are rock sliders and are designed to take a beating. You think people look at that?? No. Nobody notices that.
I would have to say you are way wrong. We are now going to be manufacturing a handful of the other companies in the same market place that notice the quality we demand and asked us to build their sliders and other parts. We sell over 500 set of sliders a month and we have 11 full time top tier welders working for us and we still run 6-8 weeks on orders so people are willing to wait for them. People that buy our stuff are people that know what quality means to them not some stuff made in China. They understand that they are supporting a company that makes stuff all in house to give jobs to people here in the USA and we build all off our stuff in house to make sure it’s the best of the best😉. The fact that we work direct with Toyota that believe in us says a lot right there. But hey to each is own. Thank you for the feed back.
I have this exact truck and wanting to get this look, what wheel spacers do you guys normally run?
I have this exact truck and wanting to get this look, what wheel spacers do you guys normally run?