SAVED OVER $300 l HOW TO REMOVE & REPAIR MERCEDES COMMAND CONTROL KNOB l RESTORE SCROLLING FUNCTION!
ฝัง
- เผยแพร่เมื่อ 8 ก.ย. 2024
- Welcome back to another episode here at Full Throttle!! This is a re edit from an original episode that was on the channel a few years ago. The audio has ben restored and the only way to fix was to reupload. Thank you for your continued support.
I will be covering the procedure of removing and repairing my command control knob in my W204 Mercedes C63 AMG that saved me over $300!! The removal will be the same for all W204 models and will be similar in all other models. The physical repair of the control knob will be the exact same for all models using this command controller. FUN FACT! The replacement part was around $20 and I found $32 of change under the center console. I actually Made $12 by doing this repair!!
JUMP TO 6:45 to skip removal and watch repair procedure.
Symptoms of Fault would be rotating knob with response on the monitor. Knob works up-down-left-right but no rotation. When the wheel is turned, no reaction on the screen will be shown. All other functions such as confirming and tilting the controller are given. The Fault: A plastic shaft within the scroller knob unit snaps causing the scroll function to no longer work on the screen. This is a very common fault on these vehicles and is a very simple solution without spending hundreds on a new unit. The solution is to order a new aluminum shaft to replace the oem plastic one. This will restore the function of the scrolling feature in your control knob. Please see affected vehicles below.
As always I greatly appreciate the support remember to smash that like button and Subscribe today so you don’t miss out on any new content!
Leave your comments and thoughts down below! Any questions do not hesitate to ask.
Vehicles Affected: C-Class W204, C204, S204, E-Class W212, S212, CLS-Class S218, X218. GLK-Class X204, X218. SLK-Class R172.
This information is for guidance only, please inspect your command knob unit to ensure compatibility.
THINGS YOU WILL NEED:
• T8 / T10 Torx socket / screw driver
• New replacement shaft
• Small pick
• Small flat head screw driver
Control Knob replacement Shaft: amzn.to/4aDBtJe
(Amazon Affiliate link, no extra cost to you but I may receive a small commission if you make the purchase. Thank you for your continued support)
✔ 4 Ways To Say Thanks & Support The Channel:
📣 Share This Video On Social Media: This costs nothing but helps a lot!
👍 Give This Video A Thumbs Up!
🔔 Subscribe to my Channel & Click The Bell For More awesome content!
Instagram: instagram.com/fullthrottle.bhp/
🚨Business enquiries - Fullthrottle.bhp@gmail.com
No explication on removing of the rear ashtray for the lifting of the console and make free the cable
www.pelicanparts.com/techarticles/Mercedes-W204/85-BODY-Rear_Console_Vent_and_Ashtray_Removal_and_Repair/85-BODY-Rear_Console_Vent_and_Ashtray_Removal_and_Repair.htm @@giorgiocolarossi9219
@@giorgiocolarossi9219 after following instructions you will see two nuts to remove which will free the rear center console to give you enough room to lift. Some people didn't need to do this. It seems the cable can be routed differently or not even secured on some vehicles.
Good job anyway, thanks
@@giorgiocolarossi9219 if you come across any other issues be sure to let me know. I appreciate the feedback to continue making new content better for everyone. 🙏
Good video sir, By any chance invite you to do a product review, We specifically produce LEDs for auto. We just emailed for an inquiry.
Thank you so much for reaching out. Truly look forward to discussing this opportunity further.
- Full Throttle
@@FullThrottleBHP Did you receive my email?