I want to say a big thanks to you for making this video Marty. You are a essential part of the community so again thanks for being awesome. I completed my setup with succes awaiting the release yesterday. And today after I woke up I was finally playing BBB at the first attempt. I did try out to go full 64 bit at first but I ran into problems with VPinSPA. That will not run in 64 bit VPX so I added the 32 bit version back as the final step and made a custom system for Pinball X and added a extra folder in the tables section.
I just finished the update and everything seems to be running great. I did restore my DMD files so I could get my color DMD back. Thanks for the video!
This guide is fantastic! Thanks a million. If I can do it, any vpinner can. Very excited to use the new open source Serum color DMD format and play the new BBB. Cheers!
You are very welcome :) No donations needed, I do it to have more friends to play pinball with! If you have to donate, we put any funds donated back into the hobby with better content, items for devs, and community giveaways. You can find me on VPU as Smaugdragon if that helps, otherwise my Twitch "About" page has some GCC shirts/hats, and a donate button.
@@vpinhub Just a question, I'm in the process of the DOF update at the moment and I'm having the issue of the DOFLinx.exe not being able to launch after changing the directory name. How would you go about changing the path to the new DirectOutputx86/config/directoutputconfig30.ini?
You are missing some MS C++ 64 bit files, here is the all in one installer www.techpowerup.com/download/visual-c-redistributable-runtime-package-all-in-one/
Thanks Marty. Was nervous about upgrading all the various components especially to x64 but following along with your videos always takes the stress out and so clear. Need to test after update but all seemed good as per your video and I’m ready for Big Bang Bar on Friday now. A similar video on pac color DMD support would be great if you get chance as it is the only thing I’ve held off from now. You rock 👍
watched this today - gonna try it out tomorrow - press all thumps :-) Thanks for the nice and clear instructions, especially talking clear and slow enough for us non-motherlanguagers (proof-lol)
@@vpinhub thx, here already comes the 1st one ;-): the latest files now are 10.8.Beta 5 which contain far less files than your example folders of vpx 10.7.4Beta. Do I absolutely need to upgrade to 10.7.4 first? And in the second step do all the stuff again with 10.8? (or just replace the Vpinball.exe file for later upgrades?) Little bit confused now.
OK, all worked like a charme with the 10.7.4 versions - supercool and great experience - thank you so much! That was easy! ;-) - now, all version 10.8 and above dont work as if some config files are missing or such. the view is messed up, playfield is rotated and wrong size - tried several 10.8 versions all the same (x86 and x64) - any ideas? Thanks again!
I found Wyltes recommendation, will try out later: "Check your video settings in VPX 10.8, especially the "Use always FS" tickbox. 10.8 stores settings separately from 10.7, so they likely just aren't set the same as your 10.7 install. "
Thanks so much for this great guide! Worked perfectly for me. The one single table I can't play on x86 anymore is "that vpinspa table". After starting it, the BG stays up but VPX just dies and goes away with no error.
New to this and still in the process of setting up my first V-pin. So I take it the VPX and Vpinmame in the "Baller Installer" is 32 bit and I should follow this procedure to bring it up to date
You totally got this! We are here if you need a hand. Good luck everyone, and help each other out! I would appreciate a like on the video so more folks can find this resource.
I really tried my best to follow the guide and the video as close as possible. The new VPinballX-x86.exe seems to work but unfortunally without Dof. The new VPinballX-x64.exe closes immediately beause a file VCOMP120.DLL could not be found.
Was about to proceed with the update then I saw this little note in the written guide: PinUP Popper BALLER Installer users please wait!, we are still working on a smooth upgrade. Oh yeah, i definitely will wait :) All the same, thanks!
I had an issue after doing all this, my Game of Thrones table's dmd stopped showing up. All my other tables worked fine. I couldn't figure it out until I power cycled my computer last night. Now it works fine and all is well. I would suggest anyone following this guide to do a restart after you've completed everything.
Important Note for Ballers..... DOCUMENT HAS BEEN UPDATED AFTER VIDEO CREATION WITH SLIGHT CHANGES. There is a copy of PinUp Player floating out there for 64-bit. We know about this, and it is beta software from Dec. We are purposely not including this because it will be redone in the near future for an all in one baller update, and I will be working with Nailbuster on that. This software was meant to be sent to 2 people for testing, and should not have gone further. Since it has, the cat is out of the bag, but everyone should be aware you are on your own with this, and I would advise waiting on this part. There are many threads starting on this topic, so I want you to know what happened before the rumor mill gets going. Again, I advise you wait a little bit on Pinup, but we will sort everything out in the near future.
In your write up directions you have. At the time of writing this document, it’s recommended that you also upgrade to a newer beta. Where do you put the sourse files doesnt tell you..plus on 64 bit on backbox during testing it is grayed out. Dosent say how to fix this? Plus with up grade where do I put plugind for 64 and 84 for colorized DMD. I tried to add and I have no DMD now..
Where to put source files is in the document actually, Step 1, 3rd bullet point. Download the following from the Assets section VPinballX-10.7.3-395-2bd9ac3-Release-win-x64.zip VPinballX-10.7.3-395-2bd9ac3-Release-win-x86.zip Extract files from the x86 download and rename the VPinballX.exe to VPinballX-x86.exe. Copy and paste all the extracted files over your existing \Visual Pinball folder Extract files from the x64 download and rename the VPinballX.exe to VPinballX-x64.exe. Copy and paste all the extracted files over your existing \Visual Pinball folder What is greyed out, the backglass? The plugin button? ColorDMD with Freezy 2.0 does not support .PAC color files. If you are using that format, you will need to look for lucky's 64 bit DLLs, and add those in. Alternately, Freezy can use PAL/VNI, SERUM, and Pin2DMD formats.
Everything works great except DOF. When I change the name of the existing DOF folder and then change the target it doesn't work. As soon as I change them both back it works again. Any ideas what could be causing that?
I just completed my upgrade and everything works other than my Pin2DMD, which is now blank after following your instructions. Any suggestions how to fix this? I now have no scoreboards on DMD games as a result, so any help would be appreciated.
Hi Marty, another question regarding B2Sserver. Creating a new folder in vpinmame instead of having all the files in the table folder does not affect the system? Everything works fine? Also I would like to do it but I only have 32 bits for know, do you think I can do it? By backglass server is 1.0 and I am afraid of messing up the system in upgrading
It does no affect the system now, I show you how to check and make sure you are working right. I have updated 32-bit by itself and then updated the b2s server many times without issue.
@@vpinhub seriously - it's crazy that all of this worked with no issues. I'm up and running 64 bit and it's perfect - no issues. In my vr aero - looks amazing.
th-cam.com/video/zc_6cr4Fo8k/w-d-xo.htmlsi=4TrAfhxE1Wr6f-X_&t=1318 Is where I explain this step, and the document linked attached will take you to the 64-bit DOF build.
cannot get this to update to visual pinball 10.8" the code execution cannot proceed because vcomp120.dll was not found" , every time i try to update , updated vpinmame , any help please
This is the first time I have heard of that. Were you using standard (orange) or alt color before? If AltColor, I would just go update Freezy,, but not seen this issue before.
I'm really late to the party with this but thank you for putting this together it was really helpful. I have two questions that I'm hoping someone might be able to help me with. 1. When I ran the flex upgrade, I set the path but my 2nd line is telling me that my DLL's are mismatched or something like that....does it matter? I was able to register the two entries below it. 2. When I deleted my screenres from the old location when I fired it up I got an error message that it was missing. I copied it back over from the new location and now it is in both spots and my tables are working. Should I be concerned by that?
thanks, i went thru upgrading my existing system with this video and everything worked except one thing i cant figure out? for some reason When running Iron Man the ROM is no longer in color? all he other SAM roms are in color but not Iron Man. any ideas? im running im_186ve with the pup pack. no coloron either x86 or x64?
I am not sure, I assume you grabbed the "SC" version of vpinmame, as this handles SAM color rom support. There is also a new update from freezy, have you tried that?
The Manual says : 64bit VPX Pincab Setup Guide ...what if i only use Desktop ? ...what differences will i come across then ? Furthermore its a really clear (almost for dummies) video ! and tuturial. Thanx !
Hey! It's been quite some time, but if I recall correctly, using the minimal install, here are no files or issues inside the "ables" folder, no DMDDevice.ini, etc. I am not an expert, but these were the findings of myself and 2 others from the team that helped produce the written guide.
I had to recently build a new desktop, so I am going to be making something along those lines soon. Until then there is the Nailbuster Pinup Popper Baller Installer video, which will get you up and running on VPX and Future Pinball.
You may have a registry conflict. Some setups had a legacy entry there preventing thigs from working, and I heard of approximately 10 users with this issue. We reported everything as a team and an update for b2s was released this morning, b2s 2.1. Sounds like you were one of the affected users. There are a lot of pre built setups that had bad registry setups, and sometimes b2s did it on it's own on old versions we found.
Cool ... very good video but I have still a problem. The version x86 starts perfectly but when I am run the x64 version then I get the following error message - Not Found the VCOMP120.DLL???
You are missing some Microsoft C++ files, here is an all in one installer www.techpowerup.com/download/visual-c-redistributable-runtime-package-all-in-one/
For what it's worth. I had the Visual C++ 2015-2019 pack already. Both 32bit and 64bit. After installing the vcredist2013_x64.exe the VCOMP120.DLL went away.
I recently switched to Visual Pinball 64 Bits. Since then, several musics/sounds are no longer played on certain tables: Medieval Madness, Monster Bash and Big Bang Bar. Do you know how to fix this problem plz ?
I have everything working except the Alternate Launcher 64 bit when loading Big Bang Bar. If I switch the default VPinballX to 64 bit it will load Big Bang Bar. Other tables load fine with the Alternate Launcher being 64 bit. Thoughts?
No idea if other tables run with 64-bit alt. Are you using the list method for all of the tables, or entering each one in manually? I am not sure how to help on this one honestly, but once I missed the .exe in the list name by mistake.
@@vpinhub It's all tables. Video card is an RTX 3080. Very strange. I have not touched any physics settings ever. Edit: I fixed it. The controller I had plugged in was causing the ball to be controlled by the left thumb stick. A reboot fixed it.
I plan on it, but lots of events threw my schedule off a bit and I still need to learn VR. I guess the short answer is yes, once I wrap my head around it well and can articulate the process with confidence ;)
i just get one issue,when i put VPinballX64.exe as alternate launcher and point to this for my table ,she still run with vpx32 . i try rename the alternate launcher in VPinballX64 or C:\Visual Pinball\VPinballX64.exe and still not working. any idea?
Excellent in depth tutorial, thanks a lot Marty ! I got an error when clicking on RegisterDirectOutputComObject at the very end which says "exit code 100", but DOF works still fine in 32 bit. However in 64 bit, when I launch a table it automatically activates the knocker and the gear motor, they both stay "on" until I exit the table. Very annoying - do you have an idea what could cause this ?
@@giveagrunt Yes, the user found his own issue, here was that result: Silly me 🙂 . I just realized what was wrong. I had forgotten to copy directoutputconfig.ini into the new C:\Directoutput_x64 folder. All's working now. Thanks for your hard work to help us all move to 64 bit !
Open a table in 64-bit, and then go to Windows volume control for the sources. Sometimes the slider is lower for some applications, but it could also be related to the table, pinsound, altsound, etc. Do you have any special setup for any of that?
So if you are a PinUP Popper user you shouldn't perform this upgrade? i dont use pinup popper as a frontend. i use the pinup popper that just plays the pinup popper videos. is that baller installer? its been so long since i did it i dont remember the diffrence anymore? so am i ok to upgrade? I'm only upgrading to play that VPW BBB they released with the amazing lighting. is it worth it to upgrade?
You can upgrade without Popper, just use the version you want to load. If you are using PinballX of something like that, you can update that program to also use the new VPX version.
@@vpinhub im just a lowly VP desktop user now lol i dont have a cab anymore. I have 2 monitors. VPX on one monitor and pup videos on my 2nd monitor. so i should be ok then? just want to be 100% i dont ruin everything. Thanks!
Sounds like you might be using the defunct PAC format? The new Freezy uses PAL/VNI, and the new Serum format. You can revert back to the lucky system if you prefer, but most are moving the new direction I think.
Can someone help me understand why the pinup popper alternate launcher isn’t working? Everything else works great. My popper is a seperate folder (also on root C) from visual pinball, which is different than what he shows in the video
In my example I use alt launcher function to point the the executable file for x64 VPX. If you are doing the same and the "lookup" method is not working, you can put the direct file name in that box as well. I was just trying to give you a way to do it with the pulldown. Is this mean to launch x64 or something else? FYI: Nailbuster put out his beta for Pinup x64, and it is making the rounds with testers.
@@vpinhub i have the same problem, big bang bar launch well with x64 vpx version outside of popper, but the pinup popper alternate launcher isn’t working. i have the same error as x86 version. For some reason it is not starting with x64 but x86 i guess. What do you mean by "put the direct file name in that box" ? in “Lookups” tab i tried to put the full path of my x64 version instead without success, table doen't start at all
In my example I use alt launcher function to point the the executable file for x64 VPX. If you are doing the same and the "lookup" method is not working, you can put the direct file name in that box as well. I was just trying to give you a way to do it with the pulldown. Is this mean to launch x64 or something else? FYI: Nailbuster put out his beta for Pinup x64, and it is making the rounds with testers.
@vpinhub yes I updated to 64 on popper but I can't get the lookup to work. Copy and pasted the name of the exe and then selected it on the bigbangbar but it won't use it.
@vpinhub yes I finally figured it out my popper was from the original launch and even though I updated it over the years the emulator launch script has changed and I never changed it. So I had to include the new launch script with alt code included 😄
I am running almost ALL in 64 bit personally, but we wanted to make sure you had options. PUPs are the main reason to keep 32 bit, for the time being at least.
Outstanding work from VPW. You guys are the pinnacle of pinball art & computer science as well as graphic arts. Also a huge thank you for this tutorial on upgrading to 64 bit. That being said, I am too chicken to update due to my lack of computer skills. I have about 400 tables(some with pup packs) which took hundreds of hours to collect & install. Kudo’s to all of you fantastically talented individuals for allowing me & my family to enjoy some of the history of my childhood.
I have not seen any PUP related issues, but GB is another beast. You have to setup vpinspa to act like a 64 bit program. I got it working with some help from google and searching 64-bit vpinmame and that machine.
Hey... after following all this ... y realice tables on VPX x86 now stutter.. I think its about B2S or Vpinmame problem... now... Im going to restore system.... just before intalling those... always x86 has worked flawlessly... so... any ideas or advise? my pc it´s not the latest... could the new vpinmame or new b2s make it reach the limit and givesound stutter? thanks!!!!
Thank you for this tutorial! Two minor callouts... 1. I had to keep my screenres.txt file in my Tables folder in order for the backglass to appear with each table launch. 2. In the Pinup Popper Game Management setup, the 32-bit version of VPX needs to be the default version in order for Pup Pack tables to launch properly. I could not get those tables to launch when assigning 64-bit as the main VPX launcher, and 32-bit as the Alternate launcher.
Hi, I followed the tutorial and everything works fine, except the 64 bit LEDs, I modified the Globalconfigb2sserver file but it's impossible to get the LEDs to work. I have trouble finding out the paths!!
I am installing a new visual pinball on a new win 11 pc, can i copy over the tables folder from my existing pc? Would i have to remove any files from that folder? I will also copy over the pinmame folder and is there any thing else to be copied over? I want to make this a fresh install. Thank you.
Tables folder would not have anything major in there, and if you want a fresh install, I would just do Tables and leave all else. I would backup all folders in case you want to keep any custom ini files.
Awesome video! I’m trying to update to 64bit but when I click the link it takes me to the page then click the 10.7.3 release link it only shows two zip files.
I don't use the PinUpPopper from Nailbuster as my front end, but Pinball X 5.50. is there a way to start certain tables in 64Bit mode? (Step 7 in the tutorial)
I would assume you just have to tell Pinball X what exe to use. Maybe this thread will help, but I have to be honest, never used Pinball X and the development of this stopped over 5 years ago to my knowledge. forums.gameex.com/forums/topic/19618-resolved-what-s-the-correct-path/
have followed your instructions to a tea but the one thing thats not working right is the B2S Backglass Server i done all you have told us to do but i still have to put the backglass file for the game in the table directory and not the backglass server folder. ?
Sounds like you might be missing some Windows C+ files. Try the all in one installer? www.techpowerup.com/download/visual-c-redistributable-runtime-package-all-in-one/ Make sure to reboot after these install. Alternately, Nailbuster also released an All in One update to get you to 64-bit www.nailbuster.com/wikipinup/doku.php?id=update_baller_may_2023
Needs updating. If you are following 64-Bit Upgrade Guide link in comments in video. I had problem with updating B2S Backglass Server. First started with Pinup Popper baller installer (Current version) . Then followed this guide the letter to step 5. VPX and B2S did not like moving files around or removing ScreenRes.txt (Maybe due to already installed by baller installer). LONG story short. I just moved ALL files from new B2SServer folder and copied/moved them to Visual Pinball\Tables folder.
You are correct, but the latest baller is now called Bonanza, and it was designed to correct this AFTER you did the upgrade. I can add some notes to the top comment and make folks aware, thank you! If you start from a new install, this upgrade should not be needed with Nailbuster's latest updates, and the auto-updater feature.
@@vpinhub My new install done with Bonanza downloaded 01/07/2024. So looks like problems still there and a FEW more related to Future Pinball installed. But as Nailbuster say's CHECK your programs are running correctly as not related to Pinup popper. TRUE but a few of them ARE related to baller installer.
I had trouble getting the backglassserver to work with 64bit Visual Pinball. Tried moving the files to the Pinmame folder like you said, and it worked!
There may be some reason why even though I correctly put the name of the launcher .exe (10.8 64bit) in Looksups/Alternate Launcher.exe and after selecting it in Alternate launcher inside the Alltables, Pinup Popper still continues to use the 32bit.exe? I checked and rechecked the names and everything seems right to me but if I launch the table directly from vpx 10.8 it works perfectly, if I use Pinup no because it lanch the table with 10.7.4 at 32bit. It's frustrating because I don't understand where the mistake is.The names are correct and in the right place so why doesn't work properly? Any advice please?
Pinip wants to use the default EXE name for it's default launcher. You might be able to change this in the emulator launch script if you really want, but I would name the one you want to the default.
i got the same problem since few month and i have try to change the Launch script in pinup with the "open examples" script ...if "[ALTEXE].....and i almost done it work.
Hello all, I did the 64bit upgrade per the video and I'm having issues with my LCD dmd (vpinmame) not closing after I exit vpx. It takes about 10 seconds for the program to shut down. You can see the black screen on my dmd monitor showing that something is still running in the back background. When I disable (use external dmd) it doesn't happen. Anyone have any ideas? VXP 32 and 64 work like a champ until I exit.
Hey there, Does this happen when using Popper, or just VPX? I don't have the answer for you but will do my best to find out. Not heard of this before here. I know I use DMDExt with Future pinball and I have to tell Popper to close it on exit through the emulator script.
@@vpinhub only happens with VPX. Running straight from VPX. Tables run great, it’s just on exit. Table closes fine. But black dmd shows on lcd screen. ctl/alt/del just shows VPX running. Closes by itself after about 10 seconds.. With 32 bit and 64 but VPX. I double check the install and the versions as per the 64 install video.
In the DirectOutput section do NOT replace your existing DirectOutput/Config files , (cabinet.xml, globalconfig.xml etc) if you don't know how to create new ones ;)
thanks so much for this! I can't get 64bit dof to work though. Plugin shows as active but I'm lost at the config files step. Because the pinscape build guide mentions nothing about a config folder but says to put the files from dof config tool in directoutput folder (not/config). Anyway I tried both but it doesn't work. 32bit dof works fine though.
I tried moving just the four files from directoutput config tool, tried copying everything without overwriting and then everything with overwriting. Tried without register exe and with but nothing works. Have verified that plugin link is working in b2s. It's possible I'm using an old version of 32bit although I don't think that should be an issue? @@vpinhub
Thanks for the great video. Its worked seemlessly for me. Can you make a video for VR next that would be awesome if you did. Thanks again keep up the great work.
Just wanted to give a huge shoutout to all you fine folks who made this update buttery smooth. It’s been about a month and a half since I last turned on my table (feels like a year being away from my vpin, haha) so I was pleasantly surprised to find the new baller installer 64bit update went live! Followed the instructions and everything went without a hitch! My “spooky” table still runs great, even my Italian plumber runs perfect (though I did update that a few months ago). But the big reason most of us upgraded was for that Big Bang Bar! Runs and looks wonderful 😭 And X Men finally launches from my PinUp Popper, no issue! So thanks again everyone, and happy pinballing!
Amazing job on the video dude - a credit to all in this great community!
Well thank you sir, been enjoying your content as well :)
I want to say a big thanks to you for making this video Marty. You are a essential part of the community so again thanks for being awesome. I completed my setup with succes awaiting the release yesterday. And today after I woke up I was finally playing BBB at the first attempt. I did try out to go full 64 bit at first but I ran into problems with VPinSPA. That will not run in 64 bit VPX so I added the 32 bit version back as the final step and made a custom system for Pinball X and added a extra folder in the tables section.
We tried to get everything, but sounds like you got that "other" table working :)
My VPinSPA doesn't work anymore. What exactly did you do to get VPinSPA to work and still be able to play Big Bang Bar in 64.
@@DJ.B_74 Basically added the x86 SciLexerVP.dll, FreeImage.dll and Bass.dll and VpinballX.exe back with the namechange just like Marty showed here.
I just finished the update and everything seems to be running great. I did restore my DMD files so I could get my color DMD back. Thanks for the video!
Nice work!
I cant thank you enough for this, thank you ever so much for making this a straight forward to the point easy to follow guide.
You are most welcome, it is the only way I learn it!
This guide is fantastic! Thanks a million. If I can do it, any vpinner can. Very excited to use the new open source Serum color DMD format and play the new BBB. Cheers!
Glad it was helpful!
Where's the Beer Me button? Seriously I have no problems donating to the cause. This sort of summary is a huge time saver. Thank you!
You are very welcome :) No donations needed, I do it to have more friends to play pinball with!
If you have to donate, we put any funds donated back into the hobby with better content, items for devs, and community giveaways.
You can find me on VPU as Smaugdragon if that helps, otherwise my Twitch "About" page has some GCC shirts/hats, and a donate button.
@@vpinhub donation sent via VPU. 👍
Fantastic video! Thank you so much for taking the time from pinball playing to lay this out so precisely. You’re a gentleman and a scholar sir.
My pleasure!
@@vpinhub Just a question, I'm in the process of the DOF update at the moment and I'm having the issue of the DOFLinx.exe not being able to launch after changing the directory name. How would you go about changing the path to the new DirectOutputx86/config/directoutputconfig30.ini?
I tried changing the paths in the .ini folder and DOF still won’t launch so I left it DirectOutput, everything’s working fine. 🤙🏻
You all are the best!!! Worked perfectly. Keep up the GREAT work!!!
Awesome, have fun and thank you!
Thanks, brilliant tutorial. I feel confident doing the upgrade with such a detailed stuff.
This is a great video. Worked for me perfectly. It was like working with a friend to do this upgrade. Thanks.
You're very welcome, and I appreciate the comment!
Thanks for this great update-walktrough guide Marty!
My pleasure!
The upgrade worked without a hitch! Thank you Marty and all involved in putting this together!
Most welcome!
Great guide/tutorial. Thanks to all involved for making this possible!
Our pleasure!
Ok. Wow, I am going to do this tomorrow. I have all the time in the world then. ;-) Thanks for your hard work.
You can do it! You are very welcome, here if you have questions.
@@vpinhub I have done it. Everything is working ok!!! Thanks a lot.
I thought I followed video exactly but when I try to launch vpx64 I get system error cannot proceed because VCOMP120.DLL was not found.. help please
You are missing some MS C++ 64 bit files, here is the all in one installer
www.techpowerup.com/download/visual-c-redistributable-runtime-package-all-in-one/
Very awesome person you are for making this video. Thanks you.
I appreciate that! Everything I do......I do it for you! ;)
Thanks Marty. Was nervous about upgrading all the various components especially to x64 but following along with your videos always takes the stress out and so clear. Need to test after update but all seemed good as per your video and I’m ready for Big Bang Bar on Friday now. A similar video on pac color DMD support would be great if you get chance as it is the only thing I’ve held off from now. You rock 👍
Thanks, colorDMD soon, just want some time to play!
Think you definitely deserve some play time after this massive undertaking 👍 Thanks again.
This was a very good tutorial Marty. Well Done
That means a lot coming from you! Thank you sir!
This is awesome. Thank you for posting this easy to follow video. ❤
Glad it was helpful!
Very good, concise instructions. Thank you!
Appreciate the comments, thank you!
watched this today - gonna try it out tomorrow - press all thumps :-) Thanks for the nice and clear instructions, especially talking clear and slow enough for us non-motherlanguagers (proof-lol)
Good luck, we are here if you have any questions!
@@vpinhub thx, here already comes the 1st one ;-): the latest files now are 10.8.Beta 5 which contain far less files than your example folders of vpx 10.7.4Beta. Do I absolutely need to upgrade to 10.7.4 first? And in the second step do all the stuff again with 10.8? (or just replace the Vpinball.exe file for later upgrades?) Little bit confused now.
OK, all worked like a charme with the 10.7.4 versions - supercool and great experience - thank you so much! That was easy! ;-) - now, all version 10.8 and above dont work as if some config files are missing or such. the view is messed up, playfield is rotated and wrong size - tried several 10.8 versions all the same (x86 and x64) - any ideas? Thanks again!
I found Wyltes recommendation, will try out later:
"Check your video settings in VPX 10.8, especially the "Use always FS" tickbox.
10.8 stores settings separately from 10.7, so they likely just aren't set the same as your 10.7 install. "
Thanks so much for this great guide! Worked perfectly for me.
The one single table I can't play on x86 anymore is "that vpinspa table". After starting it, the BG stays up but VPX just dies and goes away with no error.
I am able to play "that" table thus far, I did stop the PUP.
Thank you for the great guide. Everything worked a treat.
You're welcome!
New to this and still in the process of setting up my first V-pin. So I take it the VPX and Vpinmame in the "Baller Installer" is 32 bit and I should follow this procedure to bring it up to date
Correct! Welcome to the hobby sir!
Not all heroes wear capes! Bravo Zulu, Marty!
Thank you sir!
Well done! Essential guide for the community.
Thanks!
Thanks! Works like a charm now great video steps.
Great to hear!
You totally got this! We are here if you need a hand. Good luck everyone, and help each other out! I would appreciate a like on the video so more folks can find this resource.
I really tried my best to follow the guide and the video as close as possible. The new VPinballX-x86.exe seems to work but unfortunally without Dof. The new VPinballX-x64.exe closes immediately beause a file VCOMP120.DLL could not be found.
Was about to proceed with the update then I saw this little note in the written guide:
PinUP Popper BALLER Installer users please wait!, we are still working on a smooth upgrade.
Oh yeah, i definitely will wait :) All the same, thanks!
Welcome, baller updates should happen over time.
@@vpinhub looking forward to it :) Just as long as a certain ... busting table still works in my build, I'll be happy 😅
@@nerdloftgaming I hear you, we have that working now by the way with the upgrade as is :)
You are a gentleman and a scholar! 😎🤘
156 confirmed users upgraded without issue!
I had an issue after doing all this, my Game of Thrones table's dmd stopped showing up. All my other tables worked fine. I couldn't figure it out until I power cycled my computer last night. Now it works fine and all is well. I would suggest anyone following this guide to do a restart after you've completed everything.
Never hurts, good advice :)
Great work, thanks for the tutorial
You're welcome!
Important Note for Ballers.....
DOCUMENT HAS BEEN UPDATED AFTER VIDEO CREATION WITH SLIGHT CHANGES.
There is a copy of PinUp Player floating out there for 64-bit. We know about this, and it is beta software from Dec. We are purposely not including this because it will be redone in the near future for an all in one baller update, and I will be working with Nailbuster on that.
This software was meant to be sent to 2 people for testing, and should not have gone further. Since it has, the cat is out of the bag, but everyone should be aware you are on your own with this, and I would advise waiting on this part.
There are many threads starting on this topic, so I want you to know what happened before the rumor mill gets going. Again, I advise you wait a little bit on Pinup, but we will sort everything out in the near future.
Thank you for your tutorial.Everything worked perfect.Cheers.😀
You're welcome!
In your write up directions you have. At the time of writing this document, it’s recommended that you also upgrade to a newer beta. Where do you put the sourse files doesnt tell you..plus on 64 bit on backbox during testing it is grayed out. Dosent say how to fix this? Plus with up grade where do I put plugind for 64 and 84 for colorized DMD. I tried to add and I have no DMD now..
Where to put source files is in the document actually, Step 1, 3rd bullet point.
Download the following from the Assets section
VPinballX-10.7.3-395-2bd9ac3-Release-win-x64.zip
VPinballX-10.7.3-395-2bd9ac3-Release-win-x86.zip
Extract files from the x86 download and rename the VPinballX.exe to VPinballX-x86.exe.
Copy and paste all the extracted files over your existing \Visual Pinball folder
Extract files from the x64 download and rename the VPinballX.exe to VPinballX-x64.exe.
Copy and paste all the extracted files over your existing \Visual Pinball folder
What is greyed out, the backglass? The plugin button?
ColorDMD with Freezy 2.0 does not support .PAC color files. If you are using that format, you will need to look for lucky's 64 bit DLLs, and add those in. Alternately, Freezy can use PAL/VNI, SERUM, and Pin2DMD formats.
On some tables no back glass. And what is grayed out is plug in box on back glass setting its checked but but plugins grayed out. Thanks for help..
Everything works great except DOF. When I change the name of the existing DOF folder and then change the target it doesn't work. As soon as I change them both back it works again. Any ideas what could be causing that?
Missing parts of the path names? Not designating ROOT paths from other paths?
I just completed my upgrade and everything works other than my Pin2DMD, which is now blank after following your instructions. Any suggestions how to fix this? I now have no scoreboards on DMD games as a result, so any help would be appreciated.
No idea on Pin2DMD as others have reported it still works. I will see if I can find any info out from other community members.
Hi Marty, another question regarding B2Sserver. Creating a new folder in vpinmame instead of having all the files in the table folder does not affect the system? Everything works fine? Also I would like to do it but I only have 32 bits for know, do you think I can do it? By backglass server is 1.0 and I am afraid of messing up the system in upgrading
It does no affect the system now, I show you how to check and make sure you are working right. I have updated 32-bit by itself and then updated the b2s server many times without issue.
I followed everything step by step, but when i was done, my altcolor no longer works, but previously did.
If you are running PAC format, look at the new Freezy update 2.2
GREAT job on this.
Thank you! Cheers!
@@vpinhub seriously - it's crazy that all of this worked with no issues. I'm up and running 64 bit and it's perfect - no issues. In my vr aero - looks amazing.
Can u share where i can get DOF-64 plz
th-cam.com/video/zc_6cr4Fo8k/w-d-xo.htmlsi=4TrAfhxE1Wr6f-X_&t=1318
Is where I explain this step, and the document linked attached will take you to the 64-bit DOF build.
@@vpinhub Thank You Kind Sir.
cannot get this to update to visual pinball 10.8" the code execution cannot proceed because vcomp120.dll was not found" , every time i try to update , updated vpinmame , any help please
Answered in your other comment in vpinmame video.
hi, i have problem with flexdmd, link don't work. what version you use ? thx
Here you go,:
github.com/vbousquet/flexdmd/releases
All my DMD’s are black and white? What did I do wrong? Any help would be greatly appreciated!
This is the first time I have heard of that. Were you using standard (orange) or alt color before? If AltColor, I would just go update Freezy,, but not seen this issue before.
I'm really late to the party with this but thank you for putting this together it was really helpful. I have two questions that I'm hoping someone might be able to help me with.
1. When I ran the flex upgrade, I set the path but my 2nd line is telling me that my DLL's are mismatched or something like that....does it matter? I was able to register the two entries below it.
2. When I deleted my screenres from the old location when I fired it up I got an error message that it was missing. I copied it back over from the new location and now it is in both spots and my tables are working. Should I be concerned by that?
Both your concerns sound like nothing to be concerned about.
I think I installed the 64-bit from day one. I was just looking at what file I used to install the first time and its already 64-bit.
Then you are ready for Friday!
thanks, i went thru upgrading my existing system with this video and everything worked except one thing i cant figure out? for some reason When running Iron Man the ROM is no longer in color? all he other SAM roms are in color but not Iron Man. any ideas? im running im_186ve with the pup pack. no coloron either x86 or x64?
I am not sure, I assume you grabbed the "SC" version of vpinmame, as this handles SAM color rom support. There is also a new update from freezy, have you tried that?
@vpinhub i did get it working by upgrading pinup popper to x64, so some file in that upgrade made it work
Just glad you are working!
@@TheModelVault
Thank you so much upgraded everything. Excellent. So helpful, thank you for time time and great tutorial.
You're very welcome!
The Manual says : 64bit VPX Pincab Setup Guide ...what if i only use Desktop ? ...what differences will i come across then ? Furthermore its a really clear (almost for dummies) video ! and tuturial. Thanx !
This applies to desktop, cabinet, or other setup. It updates the back end, and not the actual tables or setup config
Hi Marty why do you copy the table folder?
Hey!
It's been quite some time, but if I recall correctly, using the minimal install, here are no files or issues inside the "ables" folder, no DMDDevice.ini, etc. I am not an expert, but these were the findings of myself and 2 others from the team that helped produce the written guide.
does anyone know if any of this is necessary for pin-up popper users? or does the 64 update for that include all this?
Only if you want to play tables that require 64-bit
Where is the best place (video tutorial) for newbies? Setting up VP and adding games.
I had to recently build a new desktop, so I am going to be making something along those lines soon. Until then there is the Nailbuster Pinup Popper Baller Installer video, which will get you up and running on VPX and Future Pinball.
Thanks for this.
How do I know which table will benefit from x64?
I play everything in 64 bit now, but essentially anything released since Big Bang Bar from VPW, and some other high texture tables run better in 64
Thx for this nice guide , very well explained , but the db2s doesn't work now, so I went back and everything works fine now, too bad
You may have a registry conflict. Some setups had a legacy entry there preventing thigs from working, and I heard of approximately 10 users with this issue. We reported everything as a team and an update for b2s was released this morning, b2s 2.1. Sounds like you were one of the affected users. There are a lot of pre built setups that had bad registry setups, and sometimes b2s did it on it's own on old versions we found.
@@vpinhub Thank you for the info
Is it possible to download the document see in the video?
Other than copying the info and pasting it into an editor I am unsure. I do not see a download there, but should be achievable.
Cool ... very good video but I have still a problem. The version x86 starts perfectly but when I am run the x64 version then I get the following error message - Not Found the VCOMP120.DLL???
You are missing some Microsoft C++ files, here is an all in one installer
www.techpowerup.com/download/visual-c-redistributable-runtime-package-all-in-one/
@@vpinhub - Thanks, now its working! Yupi!!!
For what it's worth. I had the Visual C++ 2015-2019 pack already. Both 32bit and 64bit. After installing the vcredist2013_x64.exe the VCOMP120.DLL went away.
I recently switched to Visual Pinball 64 Bits. Since then, several musics/sounds are no longer played on certain tables: Medieval Madness, Monster Bash and Big Bang Bar.
Do you know how to fix this problem plz ?
Looks like you joined the discord this morning and disabled your center channel and it works ok. Sorry for the delay here!
I have everything working except the Alternate Launcher 64 bit when loading Big Bang Bar. If I switch the default VPinballX to 64 bit it will load Big Bang Bar. Other tables load fine with the Alternate Launcher being 64 bit. Thoughts?
No idea if other tables run with 64-bit alt. Are you using the list method for all of the tables, or entering each one in manually? I am not sure how to help on this one honestly, but once I missed the .exe in the list name by mistake.
The physics are messed up for me. The ball always runs to the top of the playfield on it's own. Any ideas?
What table and video card are you running? No reports of physics affected.
@@vpinhub It's all tables. Video card is an RTX 3080. Very strange. I have not touched any physics settings ever.
Edit: I fixed it. The controller I had plugged in was causing the ball to be controlled by the left thumb stick. A reboot fixed it.
Everything seems to work except my back glass no longer appears anybody have a tip?
Check your screenres.txt file, you likely have he backglass behind something else.
don't think you have to rename vpinballx when you copy it over. for 32 bit...especially now that the 64bit is already renamed.
Only suggested if you want to keep older versions of VPX, but you have the idea.
Could you do a tutorial on how to get it set up for VR been trying to get it working
I plan on it, but lots of events threw my schedule off a bit and I still need to learn VR. I guess the short answer is yes, once I wrap my head around it well and can articulate the process with confidence ;)
i just get one issue,when i put VPinballX64.exe as alternate launcher and point to this for my table ,she still run with vpx32 .
i try rename the alternate launcher in VPinballX64 or C:\Visual Pinball\VPinballX64.exe and still not working.
any idea?
Sorry no, that sounds odd. Maybe you can copy the file name, and paste it into the "list" so it ensures proper format?
That's what i do , thanks anyway
Excellent in depth tutorial, thanks a lot Marty ! I got an error when clicking on RegisterDirectOutputComObject at the very end which says "exit code 100", but DOF works still fine in 32 bit. However in 64 bit, when I launch a table it automatically activates the knocker and the gear motor, they both stay "on" until I exit the table. Very annoying - do you have an idea what could cause this ?
I replied on VPNation, let's try and sort you out!
@@vpinhub Any word? I'm having this issue too
@@giveagrunt Yes, the user found his own issue, here was that result:
Silly me 🙂 . I just realized what was wrong. I had forgotten to copy directoutputconfig.ini into the new C:\Directoutput_x64 folder. All's working now. Thanks for your hard work to help us all move to 64 bit !
After update to vpinballx64 the volume of my tables is very low . When I run the table trough vpinballx86 the volume is fine ,any ideas ?
Open a table in 64-bit, and then go to Windows volume control for the sources. Sometimes the slider is lower for some applications, but it could also be related to the table, pinsound, altsound, etc. Do you have any special setup for any of that?
@@vpinhub the sound settings are exactly the same for both 64 and 86 , and is for all the tables, I don't use pinvol or any other programs ;-(
so now the 10.7.3 is gone, guess go with the 10.7.4....updated 2 hours ago....?
10.73 beta build was actually 10.74, but yes, sounds right.
So all is working on 64bit as per 32bit now?
Most is good now that Nailbuster has released a small update for PinUp Player, I keep 32 bit just in case but I run almost all in 64 now.
So if you are a PinUP Popper user you shouldn't perform this upgrade? i dont use pinup popper as a frontend. i use the pinup popper that just plays the pinup popper videos. is that baller installer? its been so long since i did it i dont remember the diffrence anymore? so am i ok to upgrade? I'm only upgrading to play that VPW BBB they released with the amazing lighting. is it worth it to upgrade?
You can upgrade without Popper, just use the version you want to load. If you are using PinballX of something like that, you can update that program to also use the new VPX version.
@@vpinhub im just a lowly VP desktop user now lol i dont have a cab anymore. I have 2 monitors.
VPX on one monitor and pup videos on my 2nd monitor. so i should be ok then? just want to be 100% i dont ruin everything. Thanks!
If I used Baller Installer will this work properly? Thx for the great tutorial!
Yes it will
@@vpinhub thank you
Followed the install and all works fine except I lost all my DMD colorizations. Any ideas?
Sounds like you might be using the defunct PAC format? The new Freezy uses PAL/VNI, and the new Serum format. You can revert back to the lucky system if you prefer, but most are moving the new direction I think.
FlexDMD file is expired
Fixed, thanks
Can someone help me understand why the pinup popper alternate launcher isn’t working? Everything else works great. My popper is a seperate folder (also on root C) from visual pinball, which is different than what he shows in the video
In my example I use alt launcher function to point the the executable file for x64 VPX. If you are doing the same and the "lookup" method is not working, you can put the direct file name in that box as well. I was just trying to give you a way to do it with the pulldown.
Is this mean to launch x64 or something else? FYI: Nailbuster put out his beta for Pinup x64, and it is making the rounds with testers.
@@vpinhub i have the same problem, big bang bar launch well with x64 vpx version outside of popper, but the pinup popper alternate launcher isn’t working. i have the same error as x86 version. For some reason it is not starting with x64 but x86 i guess.
What do you mean by "put the direct file name in that box" ? in “Lookups” tab i tried to put the full path of my x64 version instead without success, table doen't start at all
ok I have everything working except no matter what i set i cant get the alt exe to work on the table. Any idea?
In my example I use alt launcher function to point the the executable file for x64 VPX. If you are doing the same and the "lookup" method is not working, you can put the direct file name in that box as well. I was just trying to give you a way to do it with the pulldown.
Is this mean to launch x64 or something else? FYI: Nailbuster put out his beta for Pinup x64, and it is making the rounds with testers.
@vpinhub yes I updated to 64 on popper but I can't get the lookup to work. Copy and pasted the name of the exe and then selected it on the bigbangbar but it won't use it.
@@rudysarcade Are you including the .exe ?
@vpinhub yes I finally figured it out my popper was from the original launch and even though I updated it over the years the emulator launch script has changed and I never changed it. So I had to include the new launch script with alt code included 😄
@@rudysarcade Can you share your launch script? I am having the same issue
What do you mean Keep 32-Bit? Did you see no benefit?
He mentions it in the video. Some tables currently require 32 bit (eg pup packs that are rom based)
I am running almost ALL in 64 bit personally, but we wanted to make sure you had options. PUPs are the main reason to keep 32 bit, for the time being at least.
@@vpinhub There's only one table, that requires 32bit: Ghostbusters.😉 Because of the VPinSPA.
PUP x64... When? Just need that.
No idea
Outstanding work from VPW. You guys are the pinnacle of pinball art & computer science as well as graphic arts. Also a huge thank you for this tutorial on upgrading to 64 bit. That being said, I am too chicken to update due to my lack of computer skills. I have about 400 tables(some with pup packs) which took hundreds of hours to collect & install. Kudo’s to all of you fantastically talented individuals for allowing me & my family to enjoy some of the history of my childhood.
Wow, thank you!
so anooying i cant get rom based pup packs on 32 bit ie the ghostbuster pupto run any ideas i tried everything
I have not seen any PUP related issues, but GB is another beast. You have to setup vpinspa to act like a 64 bit program. I got it working with some help from google and searching 64-bit vpinmame and that machine.
@@vpinhub nice didnt know u could do 64bit vpinspa wsill have 2 look it up
@@vpinhub cant find any info on 64bit vpinspa ?
Hey... after following all this ... y realice tables on VPX x86 now stutter.. I think its about B2S or Vpinmame problem... now... Im going to restore system.... just before intalling those... always x86 has worked flawlessly... so... any ideas or advise? my pc it´s not the latest... could the new vpinmame or new b2s make it reach the limit and givesound stutter? thanks!!!!
Very much so, a lot of the new VPW tables on the new vpinmame can be very intensive. What video card are you using?
Thank you for this tutorial! Two minor callouts...
1. I had to keep my screenres.txt file in my Tables folder in order for the backglass to appear with each table launch.
2. In the Pinup Popper Game Management setup, the 32-bit version of VPX needs to be the default version in order for Pup Pack tables to launch properly. I could not get those tables to launch when assigning 64-bit as the main VPX launcher, and 32-bit as the Alternate launcher.
Thanks for sharing!
Hi, I followed the tutorial and everything works fine, except the 64 bit LEDs, I modified the Globalconfigb2sserver file but it's impossible to get the LEDs to work. I have trouble finding out the paths!!
I do not have LEDs, but I know others have solved this issue, sadly I am unsure where to direct you.
I am installing a new visual pinball on a new win 11 pc, can i copy over the tables folder from my existing pc? Would i have to remove any files from that folder?
I will also copy over the pinmame folder and is there any thing else to be copied over?
I want to make this a fresh install.
Thank you.
Tables folder would not have anything major in there, and if you want a fresh install, I would just do Tables and leave all else. I would backup all folders in case you want to keep any custom ini files.
Awesome video! I’m trying to update to 64bit but when I click the link it takes me to the page then click the 10.7.3 release link it only shows two zip files.
You can move to 10.8 with a fair amount of confidence
I don't use the PinUpPopper from Nailbuster as my front end, but Pinball X 5.50.
is there a way to start certain tables in 64Bit mode? (Step 7 in the tutorial)
I would assume you just have to tell Pinball X what exe to use. Maybe this thread will help, but I have to be honest, never used Pinball X and the development of this stopped over 5 years ago to my knowledge.
forums.gameex.com/forums/topic/19618-resolved-what-s-the-correct-path/
Is this the same as (optional) Update Baller Installer May, 2023 (Full 64 bit upgrade) from Nailbuster?
He made that after my video, so it has a few things diff and updated. Go with that and I am here if you need hep
A big thanks to all of you working so hard for us to have fun.
Our pleasure!
Ugh! That loud techno eclipsing his voice made me have ta tap out. Bummer! 🤦♂️
Appreciate the feedback! There is a written guide linked as well for you.
have followed your instructions to a tea but the one thing thats not working right is the B2S Backglass Server i done all you have told us to do but i still have to put the backglass file for the game in the table directory and not the backglass server folder. ?
Sounds like you might be missing some Windows C+ files. Try the all in one installer?
www.techpowerup.com/download/visual-c-redistributable-runtime-package-all-in-one/
Make sure to reboot after these install.
Alternately, Nailbuster also released an All in One update to get you to 64-bit
www.nailbuster.com/wikipinup/doku.php?id=update_baller_may_2023
Needs updating. If you are following 64-Bit Upgrade Guide link in comments in video. I had problem with updating B2S Backglass Server. First started with Pinup Popper baller installer (Current version) . Then followed this guide the letter to step 5. VPX and B2S did not like moving files around or removing ScreenRes.txt (Maybe due to already installed by baller installer). LONG story short. I just moved ALL files from new B2SServer folder and copied/moved them to Visual Pinball\Tables folder.
You are correct, but the latest baller is now called Bonanza, and it was designed to correct this AFTER you did the upgrade. I can add some notes to the top comment and make folks aware, thank you!
If you start from a new install, this upgrade should not be needed with Nailbuster's latest updates, and the auto-updater feature.
@@vpinhub My new install done with Bonanza downloaded 01/07/2024. So looks like problems still there and a FEW more related to Future Pinball installed. But as Nailbuster say's CHECK your programs are running correctly as not related to Pinup popper. TRUE but a few of them ARE related to baller installer.
Thanks so much, I am now on 64 but... Now on to youd 10.8 video
Glad I could help
I had trouble getting the backglassserver to work with 64bit Visual Pinball. Tried moving the files to the Pinmame folder like you said, and it worked!
Nice!
There may be some reason why even though I correctly put the name of the launcher .exe (10.8 64bit) in Looksups/Alternate Launcher.exe and after selecting it in Alternate launcher inside the Alltables, Pinup Popper still continues to use the 32bit.exe? I checked and rechecked the names and everything seems right to me but if I launch the table directly from vpx 10.8 it works perfectly, if I use Pinup no because it lanch the table with 10.7.4 at 32bit. It's frustrating because I don't understand where the mistake is.The names are correct and in the right place so why doesn't work properly? Any advice please?
Pinip wants to use the default EXE name for it's default launcher. You might be able to change this in the emulator launch script if you really want, but I would name the one you want to the default.
i got the same problem since few month and i have try to change the Launch script in pinup with the "open examples" script ...if "[ALTEXE].....and i almost done it work.
Hello all, I did the 64bit upgrade per the video and I'm having issues with my LCD dmd (vpinmame) not closing after I exit vpx. It takes about 10 seconds for the program to shut down. You can see the black screen on my dmd monitor showing that something is still running in the back background. When I disable (use external dmd) it doesn't happen.
Anyone have any ideas? VXP 32 and 64 work like a champ until I exit.
Hey there,
Does this happen when using Popper, or just VPX? I don't have the answer for you but will do my best to find out. Not heard of this before here. I know I use DMDExt with Future pinball and I have to tell Popper to close it on exit through the emulator script.
@@vpinhub only happens with VPX. Running straight from VPX. Tables run great, it’s just on exit. Table closes fine. But black dmd shows on lcd screen. ctl/alt/del just shows VPX running. Closes by itself after about 10 seconds.. With 32 bit and 64 but VPX. I double check the install and the versions as per the 64 install video.
Where do the new B2S backglass files go into now?
Still the tables folder, with the table
Thanks Marty, you are the Bob Ross of the pin world. :)
lol, I hear that, and Ernest P Worrel a lot :)
@@vpinhub Ha... yep... with a healthy dash of the guy from The Why Files... half brother?? www.youtube.com/@TheWhyFiles
Happy pins
In the DirectOutput section do NOT replace your existing DirectOutput/Config files , (cabinet.xml, globalconfig.xml etc) if you don't know how to create new ones ;)
Backing up is essential!
thanks so much for this! I can't get 64bit dof to work though. Plugin shows as active but I'm lost at the config files step. Because the pinscape build guide mentions nothing about a config folder but says to put the files from dof config tool in directoutput folder (not/config). Anyway I tried both but it doesn't work. 32bit dof works fine though.
Just copy the same file/folder structure for the config you have in 32 bit, just in the 64 folder. Does that make sense?
@@vpinhub thanks I'll try copying the whole folder with no overwrite
@@FrankHerfjord Just keep the foldername for 64 and it should work
I tried moving just the four files from directoutput config tool, tried copying everything without overwriting and then everything with overwriting. Tried without register exe and with but nothing works. Have verified that plugin link is working in b2s. It's possible I'm using an old version of 32bit although I don't think that should be an issue? @@vpinhub
Thanks for the great video. Its worked seemlessly for me. Can you make a video for VR next that would be awesome if you did. Thanks again keep up the great work.
Just wanted to give a huge shoutout to all you fine folks who made this update buttery smooth. It’s been about a month and a half since I last turned on my table (feels like a year being away from my vpin, haha) so I was pleasantly surprised to find the new baller installer 64bit update went live!
Followed the instructions and everything went without a hitch! My “spooky” table still runs great, even my Italian plumber runs perfect (though I did update that a few months ago). But the big reason most of us upgraded was for that Big Bang Bar! Runs and looks wonderful 😭 And X Men finally launches from my PinUp Popper, no issue!
So thanks again everyone, and happy pinballing!
Thanks for all the hard work Marty and everyone involved in creating this video and guide!
Pleasure, I have to learn this stuff too so we may as well spread the knowedge!