How to Replace Change to Solid Tire in Xiaomi M365 Electric Scooter Wheels | English
ฝัง
- เผยแพร่เมื่อ 10 ก.ย. 2020
- How to Replace Change to Solid Tire in Xiaomi M365 Electric Scooter Wheels
After two years of heavy use, many problems have arisen in the popular scooter Xiaomi mijia 365 In this video, I brought you a simple and cheap solution to the most important problem you can encounter.
Video’s about Xiaomi Mijia 365:
-How to replace CHANGE DISPLAY xiaomi mijia M365 Electric Scooter to pro tutorial l English • How to replace change ...
-HOW TO change xiaomi mijia 365 scooter BRAKE PADS | English guide step by step • HOW TO change xiaomi m...
-Solution for XIAOMI MIJIA 365 big problem • حل سهل و رخيص للمشكلة ... - ภาพยนตร์และแอนิเมชัน
![CAMPปลิ้น | EP.77[2/2] "รับทราบ" แก๊งเพื่อนรัก 10 ปี ที่ไปไหนก็มีตำนาน!](http://i.ytimg.com/vi/ifc0ofD51B0/mqdefault.jpg)
Video’s about Xiaomi Mijia 365:
-How to replace CHANGE DISPLAY xiaomi mijia M365 Electric Scooter to pro tutorial l English th-cam.com/video/esGG58_stEQ/w-d-xo.html
-HOW TO change xiaomi mijia 365 scooter BRAKE PADS | English guide step by step th-cam.com/video/WBZSgkE8_dc/w-d-xo.html
-Solution for XIAOMI MIJIA 365 big problem th-cam.com/video/na9Po6Lxsr4/w-d-xo.html
each time i replace a tire on one of these things i feel my life expectancy go down by 5 years
Mate it takes 2 minutes to put it on.
I followed the way hes doing it in the video on my back wheel. And hes doing it wrong.
I put tne tire on the ground and lever the rim from above on the tire instead of the rim on the ground.
Only 5? I lose 10 years of my life when replacing the front tube
@KOsports yes I like the tyres. I use to get puncture every time I got on it.
After the first one, you shouldn't have to put another on again. Solid tire that is ...
@@pacattack7121 i also get flat almost every ride i take..hah... but is it okay to youre joints to ride with these solid tires?
For me, boiling and using my feet on the floor worked; soap was also included. Thanks a lot as well for the straightening tips. A small nightmare will soon be over here, love it!
how are the solid tires? any good comfort riding the scooter?
The front tire looked so easy, But i think cause there was 2 people. I worked alone on the front wheel like almost 2 hours, Thank you for this video!
Thank you for your response✅ it is indeed very difficult, but with some patience and perseverance it will work
I done this it took quite long as I didn’t have a socket rench or a spanner but took some time and I’ll tell you it’s the hardest thing I done in a while glad both of my wheels have soild tires now
after four blisters on my hand and alot of stress and sweat, i've finally got it on. i have to admit you made it look easy.
I am very happy to hear you succeed, it’s definitely not easy, but I tried to share my experience as it is, maybe the power of editing makes it looks easier but it’s not. Cheers
This is exactly why I bought one with solid tires. None of this nonsense, messing with tires for hour(s). Been seeing more and more reviews of people switching to solid tires because the pneumatic ones are super easy to puncture and happen quite often...
YA BUT I GOT MY XIAOMI FOR 406 ON WOOT/NOW ITS ANOTHER 125 TO SOLID TIRES EXPERT WORKING/SO I BET UR SCOOTER WAS ALOT MORE WITH THE SOLIDS ALREADY ON/THEY GOTTA MAKE MONEY
How are the tyres holding up ? Did it worth it ?
@@surfactor777 Solid tire scooters are actually cheaper. Most people want pneumatic as the solid tires ride hard and has less traction. I want to ditch them and put pneumatic on mine. The key to not have flat is usually keeping the pressure higher. At 32-36psi you won't have issues while at low 20-24psi it might get puncture. Also depends on the tire manufacturer. Some blow out faster. I could try using the green slime, maybe that will help on the pneumatic.
@@wortexinternational2598 I LIVE INLA/AIR TIRES DONT WORK/OUR STREETS ARE HORIBLE WITH HOBOS BUSTING GLASS AND NAILS /GOLDEN ARM ACTOR
@@surfactor777 oh boy. That must be terrible. No such issue here. Mostly just cracks, potholes and because of those i need better ride quality.
I rate you for getting that tyre on without boiling it to soften the tyre.
5 minutes in the microwave, lotta strength and use of feet. big orange heat gloves and 2 screwdrivers later my scooter is in working order :))))) thank you very much
I FOUND OUT HOW TO PUT THE SOLID TIRE ON EASILY!!! After trying for 2 hours with a boiled tire and WD-40 with no success, I tried something new.
1) Put the room temp solid tires in the microwave for 3 mins.
2) Put on gloves. I started with rubber gloves, but the tires were too hot to touch so I used leather gloves.
3) When the tires are done heating up, rub dish soap on the inner part of the tire.
4) Then take the tire to the wheel, make sure the arrows on the tire will be facing toward the front of the scooter
5) Wrap the wheel from the bottom and force the tire on. It will go on pretty easily without much force. I didn't even have to use levers for this.
6) After it's on make sure to straighten the tire by using a long tool to poke thru the honeycombs and pull the inner part of the tire toward the center of the wheel.
I took it out for a ride after this and it was perfect. I got back home without a popped inner tube for maybe the first time ever. I hope this helps somebody out there!
don’t work
Solid tyres forever, So much joy not having a flat tyre when out riding❤
After only 5 minutes in the microwave, the tyre melted, I now have pile of what was once a tyre, thanks
Way whattt
@@michaelshekhani7385 man for real it's been almost a week and my house still smells of melted tyre it stinks so much
@@eitansolonik2239 ight thx imma be sure to not microwave it
Same here. Its kind of baked/melted after 5-6 min microwave.
20€ just gone
15 min i wrote about my melted baked wheel, i tried again and i fixed it (the wheel was still warm but looked almost normal again.
By far the best video to follow. Thanks
Glad to hear that. Thank you so much 👍🏼👍🏼
a lot of thanks brother.
I don’t have enough money to give fixing charge after buy a solid tire . Then i watch your video step by step and fix it.
Thanks thanks thanks ❤️
You are very welcome, I am happy to help you 😊
السلام اول لايك بالتوفيق والمزيد من لايكات
شكرا جزيلا لكي 💜
I think he lost a lot of temper replacing. After that he is a different person..
Thanks for this, huge help to change both tires on my daughter's scooter!
You are welcome, I appreciate your response and I am so glad to be able to help you.
Tbarklah 3lik almotawadi3
I just replaced an air tire after wrestling with it for an hour. You may want to lubricate the tire AND the rim. And use zip ties to keep it in place. Place the axle between two wooden blocks so the wheel is stable, it will allow you to keep the wheel in place with one foot and with more then 4 spoon handles you can push the tire in place.
Ye was an absolute pain in the ass
I just did mine
th-cam.com/video/FCi6fa6KUts/w-d-xo.html
Only bad part about lubricant is it stays on the tire and can make the tire spin on the wheel
Thank you for posting I learnt so much, you saved me plenty of potential frustration👍
I put my tyre in the microwave for 12 minutes and the glass cracked from the heat - don’t do this, just put it in a big pot instead
Ooh that’s not good, I did mine in the microwave, and nothing happened, but if you are suspicious about that just boil it in a big pot as you said
How stupid do you have to be to put the tire in the microwave for 12 minutes?!
Max. amount of time is 3 minutes, you should flip the tire on the other side after 1 minute, so you flip it 3 times, just so the heat can be equaly distributed everywhere.
Again, not 12 minutes but 3!
@@zlatni_orao or just put it in a pot
Oh my God, 12 minutes!! Are you serious!! Why would you put it in the microwave that long??!? 3 minutes in 1 minute intervals and, flip it each minute 🤦♂️
12 minutes just hahaha!! Didn't you smell something lol??
@@zlatni_orao right! What person puts it in the microwave that long? Then tells people about it publicly. The dumb is strong with this one 🤦♂️😆
Just purchased 2x hard tyres because yes tired ( no pun intended 🙂) of continuous punctures, Bumped into your demo and feeling confident about fitting them now
Cheers buddy 👍👍
Use washing-up liquid and two people,not zip ties
Use dishwasher soap to ease the install. Also there are specially designed tools that works for this better. While watching your video I remembered the 1st time I installed a gokart tires on my kids gokart. Same struggle. I have spent 2h to install the 4 tires !!! I bought the special tool and 4 tires takes me 15minutes and no sweat, no struggle. Special tools makes life easy. These tires you installed seems very soft. Are they proving good comfort and grip ?
This was a help! it really is a horrible process and a horrifically designed bit of kit. I had huge issues getting the mini screws out, the main nuts were so tight i couldnt getting them to move even hitting the spanner with a hammer. Then when it came to getting the solid tire on - its a mission. I boiled for 20 minutes and rubbed vasoline around the rim before pushing it on - youll need three screw drivers to act as tire irons but i managed it after 3 or 4 goes. i dont imagine that solid tire will ever come off now! hahah.
Thank you for your kind comment, it’s indeed not simpel but with a lot of patience it works
Lekker bezig!
Dank u wel
Very useful! Thanks!
You're welcome 😊
U make it look so easy ! Nice
Hihi that’s the power of editing.
It’s not very easy, on the other hand it’s not too difficult, just be patient
It is really easy. Check this out
th-cam.com/video/FCi6fa6KUts/w-d-xo.html
Thanks, dis really helps a lot
Iam glad to be able to help 👍👍🌼🍀
Thank you for video
You’re welcome, stay tuned for more
Cool Video,thanx
Thanks for the nice comment 👍🏻🌻
Heat up the tire with the hottest possible tap water first for 30 minutes or so, then use boiling water for 15/20 minutes
I boil 1 gallon of water then put the tire in the kitchen sink then put the water for 3 minutes in there.works perfect.
th-cam.com/video/FCi6fa6KUts/w-d-xo.html
Yay i am the 1k like !
🥳🥳🥳thank you so much 👍👍
this is cool bro.
Thank you 😊
I’m a girl and now I’m living in rural area . I have no idea to fix my scooter but after I watched your video I think it really help me . Thanks so much . Really appreciate your information 🙏🙏🙏
Thank you for your kind comment, I am glad to be able help
I get good idea from this video
I am happy to help 😊
Genius 🙂👍
Thanks 🙏🏻
this video saved my life. if i stumbled upon you. i owe you a beer. cheers
Thanks for your kind comment, I am happy to hear it☺️😀
Microwave the solid tires to pake them flexible rubber stretches better when heated
Could you please share to measure off wheels, specially I need the size of Internal wheel size, not the honeycomb wheels thank for sharing
That was amazing. Thanks for the video
I'm trying to get my husband to change to solid tyres on his e scooter. He keeps getting punctures.
Also can you use any make of tyres for the wheels. As long as its the correct size. I have a galaxy urban my tyres are solid. And I want to change only the back
Wheel. Can i use any solid type
Thank you.
Thanks for watching. As you said as long as the solid tyres have the same size and width I guess there will be no problems. Just keep trying until he change the tyres 👍🏼😀. About your scooter Galaxy urban, the front wheel is already a solid tyre, than you can change the rear tyre with any solid one but you have to buy the same size and width. thanks for your comment
It's the only way. Solid rubber tires saves u alot of work and it's easy to change
Yes indeed no headaches any more 🥳🥳
damn! I was sweating like bruce almighty when i had to get the rubber replacement tire on the rim fewf that was a nice workout
Mine are coming tomorrow I’m gassed 🤘🏼
I wish you a lot of success and patience, you will succeed👍🏻🙏
@@yassinebvlogs5186 thanks guy, this vid helped a load they’re on 😎
glad to hear, I am happy for you guy 🛴🛴
Great video. Wouldn't recommend microwaving rubber tbh
Thank you James, I was suspicious too but After boiling it in water, it was to enough I put them for a couple minutes in the microwave and it was ok.
Ok video but u guys are spending way to much effort getting that tire on. I did it with a single strip a spoon and a screwdriver
@@slayer271 "5 months later".... how's that video going?
you can install a suspension so that turning a corner with solid tires doesn't feel like suicide anymore.
this significantly increases driving comfort.
I have two of these suspensions, one is good - the other is not.
I was looking to buy one from amazon or aliexpress, which one you think is good?
@@yassinebvlogs5186 I have this aliexpress.com/item/4000691259884.html and This one.
aliexpress.com/item/1005001469378507.html
At first I didn't liked the first suspension because there was too little travel, because the mudguard touched it while it was springing, then I bought the second and it was even worse.
Then I switched back to the first big suspension again and removed the fender, now I'm happy
It's fun with suspension and 10 "tires.
I now drive over lawns or jump stairs with it, without suspension i don't dared to do so.
greets :)
Thanks for sharing the links 👍🏼
@@Bergwacht which one is good amd which one is bad then sir?
@@klpropertylistings7094 Both sucks,
On of them is only for 75 kilo peoples, It always springs right through to the end every bump.
and with the other suspension this happend to me.
i.postimg.cc/1ztDTwqF/unnamed.jpg
now iam using the original monorim, but it costs a little.
www.amazon.de/-/en/Monorim-Original-Suspension-Essential-Electric/dp/B085G9ZM6X/ref=sr_1_2?dchild=1&keywords=monorim&qid=1607685370&sr=8-2
just look for "Monorim"
this is the first suspension that i trust
you should also buy the expensive monorim if you like your life
My wheel feels kind of loose after changing the wheels to puncture free. But only front wheel, and I can only feel it when Im driving. Any idea why? Did everything you did. Seems to not be perfectly alligned with the cover that is over the wheel. Im not english but trying to explain my problem
Hey ya get a rag with diesel on it whipe it around the inside and it will slip right in diesel soften the rubber temporary pulse its slippery remembre only on the inside of wheel your welcome 😉
Thank you my friend, for me it is too late I wished I knew that before. But it's a very valuable advice for people who want to make the move✅👍🏼
Why do you cook the tire? Does it widens a bit when its cooked so it goes up easier?
Yes indeed, you should boil them in water or put them in the microwave for about 20 minutes so that you can handle them easily. Otherwise it is too difficult to place them on the rims.
Tip from me to other people ! If you do it don’t use power tools, they screws get rounded of way to quick
Yes indeed, but if you can choose the power of the power tool than its totally ok. That was the case for me. Thanks for your valuable comment ✅✅
@@yassinebvlogs5186 no problem! I rounded the screws using a power tool on mine :(
You can buy tire slider things that make it alot easier to remove a tire. Think they are like 6 bucks.
05:29 you put the whwel inside from the cable side , how you did it ? How you took out the cable put the wheel and put him back again the cable ?
just while trying to get the tire around the rim the rim went in and came out the other side, hopefully my explanation is clear and you get what i mean. I certainly didn't remove the cable and put it back in
Replacing them is really hard and it took me 3 days of trying to install the new one
Anyone know if you do this with the carrera impel is1????
Where can i get that red thing that replaced the folding mechamism?
hi! were you satisfied with these tires? I just bought some
Soap on the edge and standing on the wheel works, on a lawn would be better. Disclaimer, I bended the rear sprocket standing on it then had to swap it out.
What is the comparison in terms of top speeds (Modes: Eco, D & Sport) & overall range when using full solid tires ? 🤔
Would love to see some data. 😑😕
Same. Makes no difference. The only difference is the riding makes it a little bumpy when they are new.
th-cam.com/video/FCi6fa6KUts/w-d-xo.html
@@DonVerchi700as I experienced that too in the beginning. 😶
What size screws and that do you need
How was the inner diameter of that tire(s) btw? Thanks
I got my solid tyre 2 days ago i replaced it from my normal air Tyre which i filled with silicone which was way better ride then the solid tyre my god the vibration on some roads bike feels like a cheap china version i will be getting air filled again with slime or silicone which it better i think my rear bearings are on there way out that solid tyre makes my rear wheel feel like the bearing are dameged there is a strange vibrating at low speeds , i also noticed make sure to undue rear disk brake and tighten when wheel is back on for ballancing els it seems to brake a bit the wheel doe not turn freely until i undone disk brake then done it back up.
Its a good video but i can tell you easier way. I try lots diferent ways but at the end just one worked. So you have to heat the tire in the water as this guy telling. After tire heated up put some oil on top of the tire and on the wheel it self so it is slippy as hell. Place tire on the top of the wheel and then stand up with your legs. Apparently your legs are more powerful than arms. I was able to squeeze this tire into place with my body weight and some feet movement in approximately 30 second from oiling part 😁
1 heat
2 oil
3 squeeze with body weight applying pressure with your feet.
Hi May i know the required sizes of the tools needed
hi mister, can i buy them red in 8p and adapt them to my xprit 10p scooter?
I am sorry I don’t know
Could you not use tire irons instead of screw drivers. Tire irons have a notch to avoid slipping.
Yes you are right but I have only tire plastic meant for the bike not iron so they will break for sure that’s why I used what I could find at home at that moment😊. Thank for helping other viewers 👍🏼
What protein powder do you use?
th-cam.com/video/FCi6fa6KUts/w-d-xo.html
Using the screw driver to align the tyres on the rim is pure gold 👍
yeah i used a flathead regular sized screw driver and just inched it on to the rim. it was sweaty
And damage the rim as well
Any difference in the ride quality?
Khoya kaynin hado li hihoum t9abi o lakhrin li mafihoumch bach tansahni
Magic editing watching you replacefront tyre
how is your feeling with this solid tires after some time ?
My finger is bleeding. Thanks Xiaomi for making it straight forward
I popped my replacement inner tube changing tyres. BRB finding the nearest bridge
Nice toes
Hihihi 😁
I just bought it less than two weeks, the tire leaked. i want to be like you It seems easy but it can't be done.
Do u change it with the tire dry are wet
After cooking them you can dry them
Put the tire in the kitchen sink. Then get a big pot and boil 1 gallon of water,then put the boiling water in the sink for 3-4 minutes. Then put Vaseline around the wheel :
th-cam.com/video/FCi6fa6KUts/w-d-xo.html
My step has standard hard wheels. I want Air wheels. How do I do it?
where did you buy the solid wheels sir? Many thanks
You can buy theme from aliexpress or amazon and I have here a link for you: amzn.to/3dTgEyF
I change to solid tire in 5 mins after a phone call to local shop/service to hear the price of theyre job for changing ;D
Hihihihi🤣
gentle as fuck with rims XD
6:23 what am I doing wrong? When I tighten those bolts real tight the wheel won’t spin
One Question. This tires are with mi 1s working?
Hello, my mijia 365 is the first generation, I hope that will help you, thanks for your question
Thank you for Antwort.
Buy a whole solid tire replacement including rim on ebay for £25. No stress!
Why don't you use center of the wheel as leverage point and easily remove the tire with one round move
That's a great idea I didn't come up👍
The microwave for me is a no no. It is better to boil the tires. It is much easier. And put some cable tie if you are working alone.
Yes boiling is definitely better, but microwave is an option.
Indeed cable tie are very helpful.
Thanks for your valuable comment 👍🏼✅
Thank you for your TH-cam drop, was there any serious reason for boiling the "rings" prior to mounting them. How long did it actually take to do the change ?
I've the feeling you bent the brake disk with all that force applied to it
I successfully changed the tyres without damaging anything
Hi I installed a new rubber tyre and it keeps coming off when riding do you think its faulty its not the wrong size as I did measure it before I purchased it
I just replaced a tube on the back tyre. i had to to it wice as i pinched the new tube........took me just a little bit less than 4 hours. Trust me next time ill boil those tyres in a pot till they are as soft as putty.
Hehehe indeed, it's not as simple as it seems, boiling the tyres makes it a bit easier
A señalado las llantas con el tornabis 🔧🤦🏻♂️🤦🏻♂️
my german legal version of the m365 came with solid yres, after changing to normal tyres iam 3 km/h faster lol
That’s cool, it feels indeed faster than befor but I haven’t measured it. I bought my 365 from China. Thanks for your comment
@@yassinebvlogs5186 I had the original m365 before, but in Germany you need a license plate and insurance and it is only allowed to drive 20 kmh ^^
Ok I didn’t knew it, here in Belgium it’s without insurance and license plate, but the max speed is 25 km/h🛴🛴🛴
@@yassinebvlogs5186 you lucky dude
Hihi thanks
Where can I buy these kind of tires for my scooter?
I bought them from Aliexpress but they took long time to arrive, if you want them soon, you can buy them on amazon
3 days from ebay they're beaut
I replaced mine without the microwave or hot water alltogether. 😄
I can’t even get my front tire off
What's the size of tyre?
I filled my old tyre after wrapping in duct tape with expanding polyurethane foam, set hard, now a perfect back up solid tyre for half the price😂
I replaced it but tyre looks crookit at front. Does not look straight 😭
front tyre suddenly appeared between scooter and wheel...
Yes I know 😊🤫 the sd card was full, i had noticed too late
Do the solid tires pop?
No they don’t
Thank you, just ignited my tire in the microwave
😂
How do you remove the front wheel to fit another one please??
very carefully loosen the nut where the cable comes out of the front wheel, you will need a wrench and with a lot of care but at the same time force, the wheel will come loose and then you can replace the tire without damaging the cable. Goodluck
I did mine
th-cam.com/video/FCi6fa6KUts/w-d-xo.html
How I did this was boil a pan of water to a simmer boil and let it sit for atleast 3-4 mins with the tire inside. Screwdrivers are gonna be your best friend especially the long ones 😂 and just stretch the cu*t out 😂
For some reason my tyre is flat when the tube is on the wheel but when i take the tube out and put air in it to check for a puncture it stays up. It's really pissing me off. Considering a solid tyre
Solid tyres all the way, no more disappointments when out riding🎉