Hi Raz, with the number of Perfect Pass products that currently exist, it would be really cool for you to develop a partnership with a few more companies and launch your own brand of rolling chassis cars specific for speedrun. Think about it, everyone buys cars from Arrma and spends a lot of money to change almost 100% of the original parts... the cars you would sell would already be created specifically for speedrun and would only need the electronics. The only thing that should be optional is the body, maybe two or three different options. It's a totally open market, nobody has done that yet.
I have an eye for detail. When I saw you using silver GPM aluminum body mounts I knew it was because you wanted to reduce the tendency for the mounts to flex under load. This is an even better solution because it eliminates flex even more. Great job!
Hello Raz my name is Mike and I am doing a limitless v2 build and recently purchased perfect pass body mounts and I love them,but I have a question about mounting the front one. I've seen on all your builds you have the foam front bumper which also has a bracket coming up where the front body mount sits like it goes under the perfect pass mount onto the Arrma to fill that gap. Where can I find that so I can mount the perfect pass front body mount properly. Thanks in advance bro. Love your channel and all the parts you put out. The build is going great so far I've got your servo springs body mounts and Iam gonna grab a couple more things it's just been slow but it will get there and thank you for all the information teaching us how to enjoy speed running.
Purchased! Was wondering what you are using on your rear shocks, is that just red silicone tubing? My first speed run car is almost done. Your videos were massive inspiration to give it a try.
Hey raz, my question is. If you break only 1 of the mounts if you crash. it would be a pain to have to buy both mounts again when you only need 1. Maybe sell them separately so its easier and cheaper for people to get new ones if they break them.
Where did you buy the support at the rear holding the perfect pass 5 hole body mount please? I would like to get one. Thank you. I have ordered all the parts from you to convert my Arrma limitless V2 as well as the servo
Hey Raz I seen a video awhile back with the battery connectors you all redesigned is there a way to send me link I can't find them & would they work good for xmaxx & outcast 8s? Thank you!
Everything You Need Is Here..
www.perfectpassrc.com/
Hi Raz, with the number of Perfect Pass products that currently exist, it would be really cool for you to develop a partnership with a few more companies and launch your own brand of rolling chassis cars specific for speedrun. Think about it, everyone buys cars from Arrma and spends a lot of money to change almost 100% of the original parts... the cars you would sell would already be created specifically for speedrun and would only need the electronics.
The only thing that should be optional is the body, maybe two or three different options.
It's a totally open market, nobody has done that yet.
*BEST COMMENT OF THE DAY*
Hey, thanks eventually that's the plan:))
@@RazShifrin I would be very happy to be your sales representative in Brazil.
Thanks!
Thanks dude!!
I have an eye for detail. When I saw you using silver GPM aluminum body mounts I knew it was because you wanted to reduce the tendency for the mounts to flex under load. This is an even better solution because it eliminates flex even more. Great job!
Simply put “ EVOLUTION OF SPEED”. Bravo 👏🏼 Sir.
It's the little things no one thinks about that's why it's awesome nice work sir. As always nice work...
AWESOME new product Raz! Great solution for a well known problem, really a MUST HAVE! 👍💪
Thank you 🙏🏻❤️
Nice!!.... Glad I hadn't purchased the mounts yet, I'm in the middle of converting my limitless to the GT setup!
Allready ordered, plus my third perfect pass. 🤩
Raz you should make a rolling Perfect Pass equipped RC!!!! Another amazing product and video!!! Happy RC’ing Y’all!!!
Awesome invention! Thank you for this 🤙🤙🤙
Thanks RC FAMILY
So far all the perfect pass parts are the best on the market for us speedrunners
Picked up my mounts!
Love the hobby always learning something new great tech tip💪🛠️👊
Purchased 😊 I love your products thank you for your time
Hello Raz my name is Mike and I am doing a limitless v2 build and recently purchased perfect pass body mounts and I love them,but I have a question about mounting the front one. I've seen on all your builds you have the foam front bumper which also has a bracket coming up where the front body mount sits like it goes under the perfect pass mount onto the Arrma to fill that gap. Where can I find that so I can mount the perfect pass front body mount properly. Thanks in advance bro. Love your channel and all the parts you put out. The build is going great so far I've got your servo springs body mounts and Iam gonna grab a couple more things it's just been slow but it will get there and thank you for all the information teaching us how to enjoy speed running.
Awsome, very well thought out produst and cost $59 cheap in my opinion, great job, 👌👌👌👌👍👍👍👍
Love these vids Raz!! Thanks man ✊✊
Purchased!
Was wondering what you are using on your rear shocks, is that just red silicone tubing?
My first speed run car is almost done. Your videos were massive inspiration to give it a try.
Looking good, ordered!
Ordered mine today
Ordered! Thanks Raz.
Perfect idea!👍👍 They will definitely help! Awesome Product as always!👌
Hey raz, my question is. If you break only 1 of the mounts if you crash. it would be a pain to have to buy both mounts again when you only need 1. Maybe sell them separately so its easier and cheaper for people to get new ones if they break them.
Good luck breaking them lol
Maybe I missed this but I would like to see a typhon 3s with all those goodies, dual motors
Looking good bro nice racing car can't wait for video.
Where did you buy the support at the rear holding the perfect pass 5 hole body mount please? I would like to get one. Thank you. I have ordered all the parts from you to convert my Arrma limitless V2 as well as the servo
Hi mr Shifrin. When will these be back on amazon?
I love it, can't wait for the release date??
I lost the pins in my mount. I’m need to replace them. What are the measurements of the pins.
Picked them up!! But I need more v2 connectors!! When is the next release?
Soon:))
Nice staff Raz! 👍
I have a question for you will you still be selling the qs8 I see there out of stock
Looks great. 👍
Sweet can you do anything on inferno gt 1/8
I can never find anything from Perfect Pass in stock anywhere.
When will the new wing be online? And when will the servo be back in stock please?
3 days:)
@@RazShifrin great success. Thank you
Hi Raz, How do we get these in the uk? I keep looking but can’t find a seller that will ship. Please and thank you.
It takes 2 -3 weeks to become international with Amazon unfortunately once we ship it to them
Thank you.
Do they work on Felonies?
Dude that’s awesome but where can I purchase your products
Link is in the description on Amazon
So your company is perfect pass? If so I got to fix my infraction I busted it pretty good and your stuff looks amazing
Ordered 👍
Good stuff👌
Hey raz some guy did 202 with a haboa! Can you please take him out! Thanks in advance!!
How can I get those mounts please
Best product
Thank you my friend!
Hey Raz I seen a video awhile back with the battery connectors you all redesigned is there a way to send me link I can't find them & would they work good for xmaxx & outcast 8s? Thank you!
Coming back soon to Amazon
How about them bat wings ?
2-3 days
I would like 200 of them please😁
sorry, it should say product, not produst, lol
I win again you all to slow haha
Why don't you balance the wheels? Or do you?
Why do people use foam over rubber tyres? And maybe a carbon fibre wheel might work better than plastic??
They do balance the wheels. And foams over rubber because nobody's making rubbers that can handle 200mph
How long will it be before you design the whole car and sell?? Lol