Hey phong u are a true master when it come to motors:) recording how ever u need a few pointer. One that help big time is keep the sun to your back it help with focus and lighting
More love from AUS. If you ever find yourself here on a holiday Phong, let us know and we'll take you and the family to Cabramatta (a suburb of Sydney) for some Pho. There's a huge Vietnamese community in Cabra and the food is incredible.
Phong! Use a torch and heat the individual seal up then I use spark plug plierswith rubber ends you can get at any local parts store. Will take you less then 5 minutes to do the whole head
awesome work Phong! one suggestion add a soundtrack to your porting scenes i love watching them but that die grinder sped up sounds like the dentist to me lol i had to play some music while watching to relax ⋮)
It would have been interesting for me to see a before and after shot of the heads but great video regardless. You make that job look so easy but anyone highly skilled at something make it look easy. Phil
I found some long nose pliers that are curved on the end and realy grippy they work really well on honda stem seals grab the from the side and yank them out
Because a few reasons, people hating on phongs choices to be NA and stay different. He’s a bit more reserved so people are more judging of someone when they talk less they assume more about them. Also I feel it’s because people are racist too, not saying anybody here is ofc ; he’s a cool guy and deserves more spotlight tbh
Yooo phong I just was say ty for all your hard work and I appreciate your technique on how you remove and do valvelash its a problem solving method 😉 👏 youra real Honda God!...Sincerely Sirgreenthe1
well we know the original J sat on limiter and on an insane 2step tune for over 5 min. this thing should breath so good, good to see more content from you
Yeah, those Phong built heads were the difference maker in the Bat Rod's winning performance. Also may be the reason the boost kicked in so early when that motor was on the hub dyno. Phong built heads usually go on All Motor setups, not boosted ones.
i love to see all of the reply s when i first started to watch phongs channel he would get like ten or fifteen replys now its going on and on lets go Phong
Hello, I checked all Junk yard J series heads, Used water and put sparkplug in, checked all the valve have weeping water. Do you after 150K mile, all the valve seat is not round anymore? even lapping won't fix that?
You can tell Phong has used a rotary burr a few times in his life... a few thousand. 😂 I remember him talking about how they did it in the old country for motorcycles.
@@402motorsports4 I lapped the valves in a k24 out of a crv with 160k miles on it and the contact on the valve was very large and high when I was done lapping. Maybe gonna need to cut new angles into the seat?
So awesome!! Phong’s a master of everything! The Bully’s Back
1000hp?😁
%1000
@PFI Speed Brent your ports have been massaged by a genius! I can't wait to see how the new setup performs.
cant wait to hear that song!
Back to back pulls on the dyno vs stock heads needs to be done! 💪💪💪
Phong is the man ... wish I had a friend like him . He seems so cool
i agree he seems like a reliable freinds that you could count one when it matters most
With all the work you're putting into that engine, the Bully is going to be seriously fast. Great job!
this is a video of a man who has impressive dedication and love for his craft.
There are few others out there like you Phong, you inspire us all!
A master of all trades good man everybody needs a friend like you man great wishes from scotland
CNC and machines are cool but nothing quite like good hands and eyes. Real treat seeing you work Phong.
Phong you are the port master! I can't wait to see the Phoenix and the Bully hit the track!👍🏻😁
Awesome job. Phong is the master of engine tuning
Master Phong doing his magic , job well done sir
Phong your head work puts machine shops to shame you do truly an amazing job. Big Respect.
Looks awesome, i cant believe how large the J series runners are. Great flow
That work is so beautiful it's almost a shame to not be seen inside the motor
Great work. You are a master at your craft.
I was so happy to see you working on a seccond set of heads for the Bully.
Beautiful work Phong! The bully is gonna rip with those heads!
Nice work, Phong! Thank you for sharing.
That is the way we used to do the heads back in days, it sounds like my dentist. Lol. Stay safe hell of a job
The dude is a g! The port work looks second to none.
I always enjoy watching the master at work!
Great job explaining everything, this is a complicated job And Phong works his Magic.
Smashed finger never good. Amazing work as always phong.
Good to see the Bully getting its teeth brushed before the event!
Hey phong u are a true master when it come to motors:) recording how ever u need a few pointer. One that help big time is keep the sun to your back it help with focus and lighting
Great work always Phong!
Phong u the man i learnt a lot by watching your videos
Great job Phong
Phong grate work you bless people and God bless you.
Looks good.the bully going be a real mean machine now since you did the port and polish head job
Man o man can i just say you make me more and more confident on taking it another level thanks phong
ON THIS CHANEL NO ONE IS FIRST WE ALL FIST .WELL LOVE PHONGS VIDEOS ....BLESINGS TO ALL WHO WACHED THIS VIDEO
So much attention to detail 😉 Phong your the man... Great videos 👍
Great video and work Phong, thank you!
Awesome work Phong!
Oh ya phong! Can't wait to hear the Bully rip some licks down the ¼!
Much love from AUS 🇦🇺
More love from AUS. If you ever find yourself here on a holiday Phong, let us know and we'll take you and the family to Cabramatta (a suburb of Sydney) for some Pho. There's a huge Vietnamese community in Cabra and the food is incredible.
Iam liking the technical videos lately first shaun now phong keep them coming brent
I just finished my d series head. Mirror polished exaust and golf dimples intake
Minor downside of doing it myself, it took 2 weeks lol
Beautiful job.👍👍👍👍👍👍👍👍👍
If you hit the valve seals with a blow torch for a few seconds you can pull them off with pliers in most cases.
Phong! Use a torch and heat the individual seal up then I use spark plug plierswith rubber ends you can get at any local parts store. Will take you less then 5 minutes to do the whole head
Awesome work Phong
Awesome to watch you work.
awesome work Phong!
one suggestion
add a soundtrack to your porting scenes
i love watching them but that die grinder sped up sounds like the dentist to me lol
i had to play some music while watching to relax ⋮)
Looking gooooood Phong! Love the freeze plug tip.
Nice werk,
Master🙏phong .as allways. Good to see you n blesings from houston tx
Let's goooo! Soo cool that your helping out with the bully phong!!!! RAD AS
superb content
He makes it look so easy..
let's go!
It would have been interesting for me to see a before and after shot of the heads but great video regardless. You make that job look so easy but anyone highly skilled at something make it look easy. Phil
Those ports are huge
Always there for your friends.👍👍👍👍
How much does polishing help with hot spots and build up?
Killing it Phong!!!🦾🔥 keep doing you
I found some long nose pliers that are curved on the end and realy grippy they work really well on honda stem seals grab the from the side and yank them out
I got my d series ones just with long pliers
I just pulled the valve seals out with pliers. Took 30 seconds. Maybe harder to remove on j series compared to k
You’re a beast Phong 😎!!
Dude how are all the pfi and boosted boys not subscribing to your channel?
Some of us are here! but seriously, how does he not have more subs
I never knew he had his own channel till today!
Because a few reasons, people hating on phongs choices to be NA and stay different. He’s a bit more reserved so people are more judging of someone when they talk less they assume more about them. Also I feel it’s because people are racist too, not saying anybody here is ofc ; he’s a cool guy and deserves more spotlight tbh
@@CorruptInfinityOfficial Honestly I enjoy video's more with less talking! I have a feeling once he gets the insight done he'll get bigger.
I use the goodson valve seal puller best tool to get them out
A true Grandmaster. 🙏🏼
Yooo phong I just was say ty for all your hard work and I appreciate your technique on how you remove and do valvelash its a problem solving method 😉 👏 youra real Honda God!...Sincerely Sirgreenthe1
Phong u ARE killing with those skills 🦾🦾
Keep that good work coming
It's gonna move a lot of air🔥
The d17a1 has those damn freeze plugs to popped one and had no idea why the coolant was going straight in the case
love your work phongs
well we know the original J sat on limiter and on an insane 2step tune for over 5 min. this thing should breath so good, good to see more content from you
Yeah, those Phong built heads were the difference maker in the Bat Rod's winning performance. Also may be the reason the boost kicked in so early when that motor was on the hub dyno. Phong built heads usually go on All Motor setups, not boosted ones.
Beautiful job
I may send u a Tsx from 27215 for some ported job with 6000valve
I love that job.!
Nice!!!!
that Phong Pha Phong Phong Song i like it when the beat go BHARHATTATATTATATat POP!
Love the content!!
✌🏻 keep up the good work.
i love to see all of the reply s when i first started to watch phongs channel he would get like ten or fifteen replys now its going on and on lets go Phong
Great shit man keep it up!
Keep up the good work 👍💯🙏
How fast is the bully gonna run with the new engine and suspension??
That looks nice!
Subbed buddy...😁🔥
Phong Do you replace the valve guides after? Or does the grinding not damage them.
I feel the exact same way after I've been working on an empty stomach all day. I hope you enjoyed that hamburger!
I couldn't find a way to message you about that special tool to remove valve springs at one time. I wanted to see how you made it if possible?
What was the cleaner in the stainless bowl?
Probably just regular fuel.
Probably a masterstock 20 generations old
Your the man 👍🏻👍🏻🏁🏁🏁
Looks good man 🤘
Hello, I checked all Junk yard J series heads, Used water and put sparkplug in, checked all the valve have weeping water. Do you after 150K mile, all the valve seat is not round anymore? even lapping won't fix that?
nice job mate, greets from belgium ;-)
Nice
No reshaping the valves and seats?
A lot of flow to gain there.
phong you should pattened that honda muti engine stand adapter
You can tell Phong has used a rotary burr a few times in his life... a few thousand. 😂
I remember him talking about how they did it in the old country for motorcycles.
legend
Phong Port FTW
Nice!
Did you polish the intake ports? Are j series direct injection?
Just did a head yesterday, six pack time..
Master phong
Phong do you need a shop hand?
How much do you charge for porting the heads
😎
Was the lapping all it needed? The seats where in good shape? You didn’t have to cut the seats?
Seats look great work perfect after lapped!!
@@402motorsports4 I lapped the valves in a k24 out of a crv with 160k miles on it and the contact on the valve was very large and high when I was done lapping. Maybe gonna need to cut new angles into the seat?
Great job Phong!!!
Just wondering, why didn’t you dimple the ports like yours?
Love it either way!!!🙏🏻❤️💪🏼👊🏼👍🏻👍🏻
This is for turbo set up no dimples!,
My Adventure, so all motor can get dimple and turbo is polished. Got it👍🏻
Thx keep up the great work phong!!!
❤️what your doing!!!
MASTER PHOUNG!!!
I was introduced to u on PFI's channel you r awesome as fuck with what you do bro you r the truth