How to apply heat transfer vinyl with a home iron
ฝัง
- เผยแพร่เมื่อ 11 ก.ย. 2024
- 99% of the vinyl I use on my channel is Specialty Materials Brands I have tried many kinds over the years, and they are my absolute favorite. The quality is top-notch, I have a video where I wash a shirt 50 times, and the vinyl still looks brand new. • Thermoflex vs. Siser: ... They have the most extensive range of products and colors around ( there are over 90 colors in the ThermoFlex Plus and GlitterFlex Ultra lines alone). They also offer free product samples on their website, which you don’t see anymore. Trust me, request a sample because if you try it, you will know why I love it.
Request a Free Sample:
specialtymater...
Specialty Materials :
specialtymater...
* I DO GET FREE PRODUCTS TO TEST SPECIALTY MATERIALS TO TEST, BUT I STILL PURCHASE 95% OF MY VINYL. I WILL ALWAYS TELL YOU WHAT YOU GET FOR FREE. *
Artwork created by me (unless otherwise noted) is available on my Patreon page:
/ betsygotcher
Affiliate Links (I Earn a Small Commission if You Use Them) :
My Amazon Store (Has most of the things I use unless I state otherwise) :
www.amazon.com...
Vinyl, Heat Press, and Cutters :
Non-Affiliated Links:
HeatTransferVinyl.com (carries all Specialty Materials Products):
www.heattransf...
Affiliate Links (I Earn a Small Commission if You Use Them) :
Heat Press Nation :
shrsl.com/3t4xq
15x15 Heat Presses:
shrsl.com/3t4up
16x20 Heat Presses:
shrsl.com/3t4vb
shareasale.com...
Cricut:
cricut.pxf.io/...
Sublimation Blanks and Supplies:
Links (I Earn a Small Commission if You Use Them) :
Conde: Use Code: CPN-CCV22 $5 off $50 purchase:
shrsl.com/3mxhs
Koala Sublimation Paper: Use Code: Betsy15 to Save 15%
shrsl.com/3mxhk
Design Software and Commercial Use Fonts and Graphics:
Affiliate Links (I Earn a Small Commission if You Use Them) :
Creative Fabrica:
www.creativefa...
Artwork created by me (unless otherwise noted) is available on my Patreon page:
/ betsygotcher
Screen Printing:
Affiliate Links (I Earn a Small Commission if You Use Them) :
Ikonart Smart Screen Stencil: Use Code: CuttinCorners for 15% off
ikonartstencil...
Find me on social media:
Instagram: / cuttincornersvinyl
Facebook: cuttincorners
Cuttin Corners Group on Facebook: / cuttincorners
Betsy's Bees (a fun place to hang out and share your crafts): / 260612806191309
I can't thank y'all enough for sticking by me through hurricanes and health issues, and everything in between. It means the world to me all the love and support that I have received throughout the years.
XOXO,
Betsy
Specialty Materials, #cuttincornersvinyl, Heat press Nation, Cuttin Corners Vinyl, heat press nation 16x20 signature series
Thank you SO much! Trying to put a logo on a shirt has never taken me this long! LOL I watched your video and basically it was the weight. I put my knee on the iron, and BAM! My shirt is DONE! :) thanks again!
That's nuts, I've never had to put that much pressure with my home iron and I've never lost anything from a shirt.
Thank you!! I followed your video and my shirt and onesie I made turned out amazingly!
As a Texan, I'm watching this thinking "is this how I sound to other people?"
Yes...
hi.. if dont have cricut machine ngn we cut the image or words ourself?
ilovemyAPEX aienapexyfuuciy theres many different and cheap vinyl cutters
Thank you. I was wondering about the technique for using a home iron to apply the HTV.
what did you put between the t shirt? cookie sheet?
Parchment paper (Teflon sheet)... same as cookie sheet
When using an iron I get marks on my shirt from the corners of the iron. What have you found to be the best way to remove them when finished?
You seriously just saved me money for my birthday outfit 😘😘😘😘😘😘😘.
Hi, I place a ceramic square on my table and cover my item with parchment paper and lots of pressure. Will this give me good results.
How does the htv applied with a household iron hold up after washing and drying?
The best thing to do is wash and dry your piece of clothing inside out.
Thank you. I feel less insecure after watching you do it. Hope mine comes out ok. Fingers crossed :)
I love this you have come a long way wow inspirational tnx ❤️
I absolutely love your videos! Thank you so much for sharing all of your knowledge :)
Thank you, life saver... Would really appreciate a print out of your guide, would make life easy...
We sell them on our website www.cuttincornersvinyl.com
Where can I purchase the ruler used to measure design placement? Or, if it was made, how? Thanks
Its on our website www.cuttincornersvinyl@gmail.com
Cuttin Corners Vinyl Nederland, Tx
Can u use the iron to warm up tortillas?
Sandalover11 lmaooooo
That is sparkalicious x
Hi Betsy! I love your tutorials! You do such a great job with your videos. I am curious as to if you press your shirt from the back also?
You’ve come a long way the press you have now is awesome 2019
What is the iron temperature you used?
Very informative, can't wait to try!
thank you, where is a good place to buy the vinyl? I don't like the cricut stuff
How hot does your iron get? Do you know the watts?
i know this is an older video but have you seen the new cricut heat press called easy press that just came out? it's a 9 by 9 iron basically but is heavy enough to handle htv now. I'm sooo curious to see what any one else thinks about it ?
it is permanet after washing this
and can i use butter peper on print
I've tried layering HTV with a home iron and I am not sure if I have my iron too hot but it melted the bottom layer. Could you do a video on layering HTV with an at home iron?
Don't know if you ever got your answer, but I've just found this video and a tip for layering is don't do the full amount of time on the first layer, do it just enough to stick so you can remove the carrier sheet and then apply the second layer for the full time
Can u warm up tortillas on the iron?
Thank you for sharing your helpful tips!:)
What can I use if I don't have a teflon sheet?
My glitter melted off. My glitter backing melted. Some of the backing melted into the shirt. My iron hates me... UGGG. I had it on linen though. Then I watched your video. I turned it down to perm press and it worked great. But now my shirt smells all burnt... and I have the Mark's on it from the glitter backing that melted into the shirt. Gonna try a knockout with a heart and the words that just melted off to cover the mistake. Pray with me. All hands in ny direction. LOL.
Please tell me what brand of shirt the raglan is and where do you get them. I wasn't sure what you said on the video. Love your videos! Thank you!
So glad I found this video. I always use my ironing board (which has a soft cover) and my iron ons NEVER stay on. My husband and I just ordered a heat press machine from Amazon to be here in a few days. I'm hoping that might help with the staying on. I only do shirts for the grandkids and some adult family members.
And my knuckles are black when I squeeze on it
I'm interest in the ruler too.
Christina Barone if you give me your email I can send you an invoice
Cuttin Corners Vinyl Nederland, Tx me too interested in the ruler
Cuttin Corners Vinyl I would like a handy dandy ruler
What type of sheet are you using?
Very helpful
I've watched many videos on using a regular iron to get many points of view and everyone says use cotton setting like you but you are the only one that says to put that amount of pressure. Everyone else says "some" pressure but too much is not good. Why do you feel you need to put ALL your weight to make the vinyl stick?
Pressure is extremely important if you want it to last through washing.
Would this work on 1000D Cordura?
Where do u get your Ragland’s at? I’d like to find a great company w/ a great quality of all different kinds of tees?
I can’t wait till I get my Flat Iron❤️💯🙌🏼🙌🏼
Thanks for sharing 😘
Love the heart!
Do they remain on the t-shirt as long as they would using a heat press?
Yes
How come you didn't have to peel the backing paper off at the end? You just took up the cover sheet and the backing paper was gone - already peeled off.
there is no backing on HTV.
No steam?
Festive AND cute!
Thank you!
Where did u get the teflon sheet
It’s on our website www.Cuttincornersvinyl.com
What is the "teflon sheet" that you use between the design and the iron? Can i use parchment paper?
yeah that works fine fam
That's a pretty shirt
i want de Ruler too :)
Link for the measure thing to center the tshirt???
www.cuttincornersvinyl.com/product-p/alignment-ruler.htm
Is that special transfer tape
Looking through ur vids now to see how u made a glitter vinyl design lol
How to apply black iron on on a white shirt
Does it leave an iron mark?
Karen Guerrero you hot
Healthy, nice irons lol
We sell it . We are getting our site up. But if you message me your email I can invoice you
Cuttin Corners Vinyl Nederland, Tx please send me an invoice as well please! Craftygurl74@gmail.com. Thanks!!
Cuttin Corners Vinyl Nederland, Tx
Jesuskingofkings72@gmail.com Thank you for the info...
Cuttin Corners Viny
Came for instructions stayed for babe
i need that ruler as well
How much are the rulers?
Danova25@outlook.com
I have been using an iron since I started making vinyl tshirts..I have never put this much pressure on my iron..I use a table top ironing board. I do however have my iron set to highest setting on cotton..I iron like she does but no pressure..I do the second press after taking off transfer sheet then flip shirt inside out and press again...I've never had any complaints with my vinyl coming off with my customers..nor with the ones I make for myself...I wash and dry them..
Excelente. Pero aun mas excelente es la preciosa chica. Te adoro mi amor. ¿Quieres ser mi esposa?
I watched and subscribed for all the wrong reasons.
Damn ur beautiful
Can u be my girlfriend?