How much oil did you use? I used like 1.95 quarts lol…. Almost 2 with a little splash left at the bottom of the second quart… Is that about what you used as well???
a few questions, why not use a bit of the new oil to coat the top of the new filter? Why the old oil? If we can just do hand tight for puting on the filter, why do we need to take it off with a wrench? would hands not work? Also, where could we get those nylon washers? And is there different sizes to worry about? ( I have the same bike as you, year as wel)
On the plastic clips you popped out on the front of the fairings, do you just stick the flathead under the outside and pry out? Or do you have to press the center of it like a button and then pry out?
For plastic clip facing forwards, you can use either a flat head or a pick to pull it out then remove the retainer. For the one facing down, I just use the back of a screwdriver and press from the inside out.
Yeah, it didn’t seem like a big difference. Only thing I really notice was the high rpm’s on the highway and the cluster of lights that came up on the display
I'm a new subscriber to the channel! If it wasn't too much to ask, could you make a video disassembling her fairings?
I live up north so my bike is currently in storage for the winter season id have to look through some footage to see if I have some clips
Big fan now
What's the oil filer part number?
How much oil did you use? I used like 1.95 quarts lol…. Almost 2 with a little splash left at the bottom of the second quart… Is that about what you used as well???
a few questions,
why not use a bit of the new oil to coat the top of the new filter? Why the old oil?
If we can just do hand tight for puting on the filter, why do we need to take it off with a wrench? would hands not work?
Also, where could we get those nylon washers? And is there different sizes to worry about? ( I have the same bike as you, year as wel)
Thank you
How many kilometer before changing the engine oil sir?
Good job mam
QUE TIPO DE ACEITE LE CAMBIASTE?
On the plastic clips you popped out on the front of the fairings, do you just stick the flathead under the outside and pry out? Or do you have to press the center of it like a button and then pry out?
For plastic clip facing forwards, you can use either a flat head or a pick to pull it out then remove the retainer. For the one facing down, I just use the back of a screwdriver and press from the inside out.
how did you get the bike on that bike stand? Did you need to install anything on the rear ?
Yeah you need frame sliders
During changing oil of ninja 650, did you reset anything at the panel board or dashboard?
I believe so, I sold the bike some time ago but I think I just turned the oil light off press enter then turn it on again to reset it
Did you ever change the front sprocket?
Yeah, it didn’t seem like a big difference. Only thing I really notice was the high rpm’s on the highway and the cluster of lights that came up on the display
@@kylelarsen472 what sprocket size did you use ?
@@alexisjvids 13t
I just installed a 14t and it did the same thing, check engine light on and gears im in won’t show on the display.
@@alexisjvids if you go onto the forms, you can hardwire it in some way or another, but it just seemed like it wasn’t worth it in the end for me